UGREEN LP405

Contents

UGREEN Car Phone Holder Stand Instruction Manual

Model: LP405

1. Product Overview

The UGREEN LP405 Car Phone Holder is a versatile and stable mount designed for convenient and safe phone usage in your vehicle. Featuring a waterfall-shaped design, it offers broad compatibility with smartphones ranging from 4.7 to 7.2 inches, including those with cases up to 11mm thick. Its strong suction cup and adjustable arm ensure a secure fit and optimal viewing angles without obstructing your driving view.

UGREEN Waterfall-shaped Phone Mount
Figure 1: UGREEN Waterfall-shaped Phone Mount, stable and slideable.
Phone in UGREEN Car Holder showing portrait and landscape modes
Figure 2: Excellent view for safe driving, supporting both portrait and landscape modes.

2. Package Contents

  • 1 x UGREEN Car Phone Holder (Model: LP405)
  • 1 x Instruction Manual
UGREEN Car Phone Holder retail packaging
Figure 3: Retail packaging of the UGREEN Car Phone Holder.

3. Setup and Installation

The UGREEN Car Phone Holder is designed for easy, tool-free installation on your car's dashboard or windshield. Follow these steps for optimal adhesion and stability.

3.1 Choosing an Installation Location

  • The holder can be mounted on the dashboard or windshield.
  • Ensure the chosen surface is clean, flat, and smooth for best suction.
  • Important: Not suitable for leather surfaces or broad textured/corrugated surfaces.
UGREEN Car Phone Holder mounted on dashboard and windshield
Figure 4: Recommended installation locations: Dashboard and Windshield.
Incompatible dashboard surfaces for UGREEN Car Phone Holder
Figure 5: Surfaces not compatible with the suction cup: leather and broad textured surfaces.

3.2 Installation Steps

  1. Assemble the holder: Connect the phone cradle to the adjustable arm and tighten the securing nut.
  2. Clean the surface: Thoroughly clean the dashboard or windshield area where you intend to mount the holder with a damp cloth, then dry completely.
  3. Prepare the suction cup: Remove the protective film from the bottom of the suction cup.
  4. Position the holder: Place the suction cup on the desired clean, flat surface.
  5. Secure the suction cup: Press down firmly on the suction cup and then push the locking lever (if present) to create a vacuum seal.
  6. Adjust the base: If your model has an adjustable base, adjust it to the desired angle before locking.
  7. Allow to set: For maximum adhesion, let the holder stand for at least 4 hours before placing a phone in it.
Installation steps for UGREEN Car Phone Holder
Figure 6: Step-by-step installation guide for the UGREEN Car Phone Holder.

Watch this video for a visual guide on installation and usage:

Video 1: UGREEN Car Phone Holder Installation and Usage Demo.

4. Operating Instructions

4.1 Placing and Removing Your Phone

  • To place: Gently push your phone into the holder. The gravity expansion mechanism will automatically lock the arms around your phone.
  • To remove: Press the rear button on the holder to release the spring-loaded arms, then lift your phone.
One-Press to Lock, One-Key to Release mechanism
Figure 7: One-Press to Lock, One-Key to Release mechanism for easy phone handling.

4.2 Adjusting Viewing Angles

  • The holder features a swivel ball-joint design, allowing for 360-degree rotation of the phone cradle.
  • The adjustable arm can be extended up to 220 degrees and rotated 60 degrees at the suction base for optimal positioning.
  • You can orient your phone in either portrait or landscape mode as needed for navigation or media viewing.
UGREEN Car Phone Holder showing various viewing angles
Figure 8: Infinite viewing angles with 220°, 360°, and 60° adjustability.
Rotating the suction base for arm adjustment
Figure 9: The suction base can be rotated to adjust the arm's position (left or right).

5. Maintenance

  • Cleaning the suction cup: If the suction cup loses its stickiness, simply rinse it under warm water and let it air dry. This will restore its adhesive properties, making it reusable.
  • General cleaning: Wipe the holder with a soft, damp cloth to remove dust and grime. Avoid harsh chemicals or abrasive materials.
Washable and reusable suction cup
Figure 10: The suction cup is washable and reusable to maintain strong adhesion.

6. Troubleshooting

  • Holder not sticking:
    • Ensure the mounting surface is clean, dry, and smooth.
    • Avoid mounting on leather or heavily textured/corrugated dashboards.
    • Rinse the suction cup with water and let it air dry to restore stickiness.
    • Ensure the locking lever is fully engaged after pressing the suction cup firmly onto the surface.
  • Phone falling out:
    • Verify that the gravity arms have fully closed around your phone.
    • Ensure your phone (with case) does not exceed the maximum thickness of 11mm.
  • Suction cup detaching in high temperatures:
    • While the UGREEN holder is designed for high and low temperature resistance (up to 70°F), extreme heat can affect adhesion. Consider mounting on the windshield if dashboard temperatures are excessively high.

7. Specifications

AttributeValue
BrandUGREEN
NameWaterfall-shaped suction cup car holder
ModelLP405
MaterialPC + ABS + Silicone
Compatibility4.7-7.2 inch phones (max 11mm thickness with case)
TypeGravity Expansion (Automatical locking/Press to lock/Stretch to lock)
User ScenarioDashboard/Centre Console/Windshield
Net Weight161g
Package Weight200g
Packaging Size140 x 92 x 75 mm
Power SourceNone (Passive gravity mechanism)
Product parameter table and dimensions diagram
Figure 11: Detailed product parameters and dimensions.

8. Warranty and Support

  • Warranty: This product comes with a 1-year warranty from the UGREEN Official Store.
  • Customer Support: For any inquiries or issues, please contact customer support. All emails will be answered within 24 hours.

9. User Tips

  • For optimal stability, especially on bumpy roads, ensure the suction cup is firmly attached and the locking mechanism is engaged.
  • If you frequently remove and re-attach the holder, regularly clean the suction cup to maintain its adhesive strength.
  • The holder uses a passive gravity mechanism and does not require any external power source.
  • The design allows for a wide charging space at the bottom, so you can easily charge your phone while it's mounted.
Considerate design details of UGREEN Car Phone Holder
Figure 12: Anti-slip rubber stripe, silicone pads, and wide charging space for user convenience.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.