Introduction
The Radtel RT-4B is a versatile 5-band amateur two-way radio designed for reliable communication across multiple frequency ranges. This portable device features a color LCD, 200 memory channels, and a robust set of functions including VOX, DTMF, 2-Tone, 5-Tone, and SOS. Its durable construction makes it suitable for various outdoor and professional applications.
Key Features:
- 5-Band Operation: Supports 136-174MHz (TX/RX), 220-260MHz (TX/RX), 350-390MHz (TX/RX), 400-480MHz (TX/RX), and 76-108MHz (FM RX).
- 200 Memory Channels: Ample storage for your preferred frequencies.
- High Power Output: 5W output suitable for outdoor adventures.
- Quad Band, Quad Standby: Enhanced monitoring capabilities.
- VOX Function: Hands-free operation for convenience.
- DTMF, 2-Tone, 5-Tone: Advanced signaling features.
- SOS Function: For emergency situations.
- Color LCD: Clear and vibrant display.
- Durable Construction: Made of special ABS material, designed to withstand drops.
- Voice Annunciation: Helps identify receiving frequency bands in low-light conditions.
- FM Radio: Listen to FM broadcasts (65-108MHz).
- Adjustable Power: High and low power settings.
- Remote Functions: Remote stun, kill, and revive capabilities.
- English Operation: User-friendly interface.
Setup Guide
1. Unpacking and Components
Carefully unpack your Radtel RT-4B radio and verify all components are present. The standard package includes:
- 1x Radtel RT-4B Walkie-Talkie
- 1x Lithium Battery (2000mAh)
- 1x Desktop Charger
- 1x Antenna
- 1x Adaptor (for charger)
- 1x Belt Clip
- 1x Hang Rope
- 1x User's Manual

2. Battery Installation and Charging
The RT-4B comes with a 2000mAh large capacity lithium battery. Before first use, fully charge the battery.
- Align the battery pack with the grooves on the back of the radio and slide it upwards until it clicks into place.
- To charge, place the radio (with battery installed) into the desktop charger. Ensure the adaptor is connected to the charger and a power outlet. The charging indicator light will show the charging status.
- A full charge typically takes several hours. Do not overcharge the battery.

3. Antenna Attachment
Screw the antenna clockwise into the connector on the top of the radio until it is finger-tight. Do not overtighten.
4. Controls and Functions Overview
Familiarize yourself with the radio's controls:

- Antenna: For signal transmission and reception.
- Progress knob: Likely for channel/frequency tuning or menu navigation.
- Power/Volume knob: Turns the radio on/off and adjusts volume.
- LCD color screen: Displays frequency, channel, battery status, and other information.
- Microphone: For voice input during transmission.
- MENU Key: Accesses the radio's menu system.
- UP/DOWN Keys: Navigate through menus or adjust frequencies/channels.
- Numeric Keypad: For direct frequency input and function selection.
- EXIT Key & A/B/C/D signal switching: Exits menus and switches between display modes/bands.
- Speaker: For audio output.
- Scan Key: Initiates frequency scanning.
- Keylock lockswitch: Locks/unlocks the keypad.
- VFO/MR Key: Switches between VFO (Variable Frequency Oscillator) and Memory Channel modes. Long press activates alarm.
- PTT Key (Push to Talk): Press and hold to transmit, release to receive.
- FM Key: Activates the FM radio function.
- Monitor Key [MONI]: Opens the squelch to listen for weak signals.
- Belt Clip: For attaching the radio to clothing or a belt.
- External Speaker/MIC Connector: For connecting external audio accessories.
- Battery pack: Provides power to the radio.
Operating Instructions
1. Power On/Off and Volume
Rotate the Power/Volume knob clockwise to turn the radio on and increase volume. Rotate counter-clockwise to decrease volume and turn off.
2. Channel and Frequency Selection
The RT-4B supports both VFO (Variable Frequency Oscillator) mode for direct frequency input and MR (Memory Recall) mode for stored channels.
- Press the VFO/MR Key to switch between modes.
- In VFO mode, use the Numeric Keypad to enter frequencies directly or the UP/DOWN Keys and Progress knob to tune.
- In MR mode, use the UP/DOWN Keys or Progress knob to select from the 200 stored memory channels.
The radio features Quad Band and Quad Standby, allowing you to monitor multiple frequency bands simultaneously on its color screen.

3. Transmitting and Receiving
To transmit, press and hold the PTT Key, speak clearly into the microphone, and release the PTT key to return to receive mode.
4. VOX Function (Voice Operated Exchange)
The VOX function allows for hands-free transmission. When activated, the radio will automatically transmit when it detects your voice, eliminating the need to press the PTT button. This is particularly useful when cycling or driving.

5. Advanced Signaling (DTMF, 2-Tone, 5-Tone)
The RT-4B supports DTMF, 2-Tone, and 5-Tone signaling for selective calling and other advanced communication features. Refer to the detailed user manual for programming and usage of these functions.
6. SOS Function
The SOS function can be activated by a long press of the VFO/MR key (if programmed). This sends out an emergency signal or alarm. Consult the full manual for configuration details.
7. FM Radio
Press the FM Key to activate the built-in FM radio. You can tune to FM broadcast stations within the 65-108MHz range. Use the UP/DOWN keys or Progress knob to change stations.
8. Scanning
Press the Scan Key to initiate frequency scanning. The radio will search for active signals across the programmed frequency range or channels. Press the key again to stop scanning.
9. Voice Annunciation
The radio features voice annunciation, which can verbally inform you of the receiving frequency band, especially useful in dark environments where the screen might be hard to read.

10. Programming and Customization
The screen character color and other settings can be programmed using a computer and a compatible programming cable. This allows for personalized customization of the radio's interface and operational parameters.

Maintenance
1. Cleaning
Wipe the radio with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the radio is dry before use.
2. Battery Care
- Avoid fully discharging the lithium battery frequently.
- Store the radio and battery in a cool, dry place when not in use for extended periods.
- Do not expose the battery to extreme temperatures.
3. Storage
When storing the radio for a long time, remove the battery and store it separately. Keep the radio in a dry, dust-free environment.
Troubleshooting
- No Power: Check battery charge level. Ensure battery is properly installed.
- Cannot Transmit/Receive: Verify antenna is securely attached. Check frequency/channel settings. Ensure PTT button is fully pressed.
- Poor Audio Quality: Adjust volume. Check for obstructions around microphone/speaker.
- Keypad Tones: If unwanted keypad tones are present, check the radio's menu settings for an option to disable key press sounds.
- Scanner Speed: The frequency scanner may operate at a moderate speed. This is normal for some models.
- Programming Issues: Ensure the correct programming software and cable are used. Drivers for the programming cable may be required.
Specifications
| Category | Specification | Value |
|---|---|---|
| General | Frequency Range (TX/RX) | 136-174MHz, 220-260MHz, 350-390MHz, 400-480MHz |
| Frequency Range (FM RX) | 76-108MHz | |
| Memory Channels | 200 | |
| Frequency Stability | ±2.5ppm | |
| Frequency Step (kHz) | 2.5K/5.0K/6.25K/10.0K/12.5K/25.0K | |
| Squelch Setup | CARRIER/CTCSS/DCS/5Tone/2TONE/DTMF | |
| Operating Temperature | -20℃ to +60℃ | |
| Operating Voltage | 7.4V DC±15% | |
| Dimensions (W x H x D) | 62 x 128 x 35 mm | |
| Weight | 230g | |
| Output Power | 3W-5W | |
| Battery Capacity | 2000mAh | |
| Waterproof / Water-Resistant | IP55 | |
| Material | Plastic | |
| Maximum Range | 5km-10km | |
| Receiver | Sensitivity (Broadband/Narrowband) | ≤0.25μV / ≤0.35μV |
| Channel Choice (Broadband/Narrowband) | ≥70dB / ≥60dB | |
| Intermodulation (Broadband/Narrowband) | ≥65dB / ≥60dB | |
| Spurious Rejection (Broadband/Narrowband) | ≥70dB / ≥60dB | |
| Audio Response (Broadband/Narrowband) | +1~-3dB (0.3-3KHz) / +1~-3dB (0.3-2.55KHz) | |
| Signal to Noise Ratio (Broadband/Narrowband) | ≥45dB / ≥40dB | |
| Audio Distortion | ≤5% | |
| Audio Output Power | ≥1W±10% | |
| Transmit | Output Power | 4W (Broadband) |
| Modulation Mode (Broadband/Narrowband) | 16KΦF3E / 11KΦF3E | |
| Channel Power (Broadband/Narrowband) | ≥70dB / ≥60dB | |
| Signal to Noise Ratio (Broadband/Narrowband) | ≥40dB / ≥36dB | |
| Parasitic Harmonic (Broadband/Narrowband) | ≥60dB / ≥60dB | |
| Audio Response (Broadband/Narrowband) | +1~-3dB (0.3-3KHz) / +1~-3dB (0.3-2.55KHz) | |
| Audio Distortion | ≤5% |

User Tips
- Scanner Performance: While the scanner offers good reception, some users have noted it can be relatively slow. Patience may be required when scanning a wide range of frequencies.
- Keypad Tones: If you find the keypad tones distracting, check the radio's menu settings for an option to disable or adjust them. This can often be found under 'Sound' or 'Key Beep' settings.
- Programming Software: The RT-4B can be programmed via computer. Many amateur radio enthusiasts use third-party software like CHIRP for programming various radios. Check online forums or the manufacturer's website for compatibility and programming guides.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.