1. Introduction
Thank you for choosing the XDOBO X8 Max or X8-III Wireless Bluetooth Speaker. These high-power portable speakers are designed to deliver a rich audio experience with advanced features like TWS interconnection, multiple EQ modes, and robust waterproof ratings. This manual will guide you through the setup, operation, and maintenance of your speaker to ensure optimal performance and longevity.
2. Key Features
- High Power Output: X8 Max features 100W, X8-III features 60W.
- Advanced Speaker System: 4-speaker mode (2 tweeters, 2 woofers) with super double diaphragm and DSP patented technology for 360-degree stereo surround sound.
- Bluetooth Connectivity: X8 Max with Bluetooth 5.0, X8-III with Bluetooth 5.3 for stable and longer transmission.
- Long-lasting Battery: 20000mAh four-cell power bank function, offering up to 12 hours of usage time and 168 hours of standby. Can charge external devices in emergencies.
- Waterproof Design: X8 Max is IPX5 waterproof, X8-III is IPX7 waterproof, suitable for outdoor use and resistant to splashes.
- TWS Interconnection: Connect two speakers wirelessly for an enhanced stereo experience.
- Multiple EQ Modes: Choose between Vocal, Full Frequency, and Deep Bass modes to suit your audio preference.
- HD Voice Calls: Built-in HD noise-cancelling microphone for clear calls.
- Voice Assistant Function: Activate your device's voice assistant with a short press of the power button (when connected via Bluetooth).
- Playback Options: Supports Bluetooth, TF card, USB disk, and AUX input.
- RGB Lighting Effects: X8-III model features dynamic RGB lighting.
3. Specifications
XDOBO X8 Max Specifications
| Feature | Specification |
|---|---|
| Model | X8 Max |
| Bluetooth Version | 5.0 |
| Output Power | 100W RMS |
| Waterproof Level | IPX5 |
| Play Mode | Bluetooth / AUX / U disk / TF card |
| Supported Music Formats | APE, FLAC, WAV, MP3 |
| Frequency Range | 20Hz - 20KHz |
| Signal-to-Noise Ratio | ≥75dB |
| Battery Specifications | 3.7V / 20000mAh |
| Charging Time | About 8 hours |
| Input Power | Type-C 5V / 3A |
| Play Time | > 12 hours |
| Connection Distance | ≥18m (open area) |
| Distortion | ≤1% |
| Product Size | 300 x 100 x 134mm |
| Weight | 2860g |
XDOBO X8-III Specifications
| Feature | Specification |
|---|---|
| Model | X8-III |
| Bluetooth Version | 5.3 |
| Output Power | 60W |
| Waterproof Level | IPX7 |
| Play Mode | Bluetooth / USB / TF card / AUX in |
| Supported Music Formats | MP3, APE, FLAC, WAV |
| Frequency Response | 40Hz - 20KHz |
| Signal-to-Noise Ratio | ≥95dB |
| Battery Type | Lithium-ion polymer |
| Charging Time | ≤4 hours |
| Input Power | Type-C 5V / 2A |
| Playing Time | 12 hours (varies by volume level and audio content) |
| Product Size | 225 x 75 x 97mm |
| Weight | 876g |
4. Setup Guide
4.1 Charging the Speaker
Before first use, fully charge your speaker. Connect the provided Type-C charging cable to the speaker's charging port and a compatible USB power adapter (5V/3A for X8 Max, 5V/2A for X8-III). The charging indicator will show the charging status. Once fully charged, the indicator will change or turn off.
- X8 Max Charging Time: Approximately 8 hours.
- X8-III Charging Time: Approximately 4 hours.
4.2 Power On/Off
Press and hold the Power button (usually marked with a power symbol or 'On/Off') for a few seconds until you hear an audible prompt or see the indicator lights illuminate/extinguish.
4.3 Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode (usually indicated by a flashing blue LED).
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth.
- Search for available Bluetooth devices. You should see "XDOBO X8 Max" or "XDOBO X8-III" in the list.
- Select the speaker to connect. Once paired, you will hear a confirmation sound, and the LED indicator will turn solid blue.
4.4 TWS (True Wireless Stereo) Interconnection
To achieve a true wireless stereo experience, you can pair two XDOBO X8 Max or X8-III speakers together:
- Power on both speakers.
- Short press the TWS button (or the Power button twice, depending on the model) on one of the speakers. Both speakers will enter pairing mode.
- After successful pairing, the main speaker will emit a confirmation beep.
- Now, connect your mobile device to the main speaker via Bluetooth as described in section 4.3. Audio will play in stereo through both speakers.
5. Operating Instructions
5.1 Control Panel Overview (X8-III Example)
- On/Off (1): Press and hold to power on/off.
- EQ Sound Change (2): Press to cycle through different EQ modes (Vocal, Full Frequency, Deep Bass).
- RGB Light Change (3): (X8-III only) Press to change RGB lighting effects.
- Volume - (4): Short press to decrease volume.
- Play/Pause (5): Short press to play or pause music. In Bluetooth state, short press to answer a call.
- Volume + (6): Short press to increase volume.
- TWS (7): Short press to initiate TWS pairing (refer to section 4.4).
5.2 Playback Modes
The speaker supports various playback modes:
- Bluetooth Mode: Connect wirelessly to your device.
- TF Card Mode: Insert a TF (MicroSD) card with music files.
- USB Disk Mode: Insert a USB flash drive with music files.
- AUX Input Mode: Connect an external audio device using a 3.5mm audio cable.
5.3 HD Voice Calls
When connected via Bluetooth, the built-in HD noise-cancelling microphone allows you to make and receive calls. Short press the Play/Pause button to answer an incoming call.
5.4 Voice Assistant Function
In Bluetooth connection state, short press the Power button to activate your device's voice assistant. This allows you to perform functions such as listening to music, sending messages, and making calls using voice commands.
6. Maintenance
6.1 Waterproofing
- X8 Max: IPX5 waterproof rating. This means it is protected against low-pressure water jets from any direction. It can withstand splashes and light rain but should not be submerged in water.
- X8-III: IPX7 waterproof rating. This means it can be submerged in water up to 1 meter for 30 minutes. While highly water-resistant, avoid prolonged submersion.
Always ensure the charging port and other input covers are securely closed before exposing the speaker to water.
6.2 Cleaning
Wipe the speaker with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the speaker is completely dry before charging or using it near water.
7. Troubleshooting
- Speaker does not power on: Ensure the battery is charged. Connect to a power source and try again.
- Cannot pair via Bluetooth: Make sure the speaker is in pairing mode (flashing LED). Turn off and on Bluetooth on your device. Ensure no other devices are connected to the speaker. Move closer to the speaker.
- No sound or low volume: Check the volume levels on both the speaker and your connected device. Ensure the correct input mode is selected.
- TWS pairing fails: Ensure both speakers are XDOBO X8 Max or X8-III models. Follow the TWS interconnection steps carefully (Section 4.4). Make sure no device is connected to either speaker before initiating TWS pairing.
- Charging not working: Check if the charging cable and adapter are working correctly. Try a different cable or power source. Ensure the charging port is clean and free of debris.
8. User Tips
- For optimal sound quality, especially with deep bass, ensure the speaker is placed on a stable surface.
- When using TWS, place the two speakers at an appropriate distance from each other for the best stereo separation.
- To maximize battery life, avoid playing music at maximum volume for extended periods.
- The power bank function is useful for emergencies, but for regular device charging, use a dedicated power bank or wall charger.
9. Warranty and Support
Your XDOBO speaker comes with a standard manufacturer's warranty. Please refer to the product packaging or the seller's website for specific warranty terms and conditions. For technical support or service inquiries, please contact the seller or XDOBO customer service directly.