UGREEN ClipBuds

Contents

UGREEN ClipBuds Open-Ear Wireless Headphones Instruction Manual

Model: ClipBuds | Brand: UGREEN

Introduction

Welcome to the UGREEN ClipBuds Open-Ear Wireless Headphones instruction manual. These headphones are designed to provide a comfortable, high-quality audio experience with an open-ear design, advanced Bluetooth 6.0 connectivity, and long battery life. This manual will guide you through the setup, operation, and maintenance of your new ClipBuds.

What's in the Box

  • UGREEN ClipBuds Open-Ear Wireless Headphones
  • Charging Case
  • Charging Cable
  • User Manual
  • Carrying Bag
  • Replaceable Pads Set

Specifications

FeatureSpecification
Brand NameUGREEN
ModelClipBuds
CommunicationTrue wireless (Bluetooth)
Bluetooth Version6.0
Bluetooth ProfilesHSP, HFP, AVRCP, A2DP
Bluetooth Frequency2400MHz-2483.5MHz
Bluetooth Range10 m / 32.8 ft
Battery Life (with charging case)Up to 30 hours
Battery Life (single charge)Up to 7 hours
Charging MethodCable
Driver Diameter12mm
Frequency Response Range20 - 20000Hz
Sensitivity48dB
Impedance RangeUp to 32 Ω
Resistance32 Ω
MicrophoneYes (4-Mic ENC Technology)
Active Noise-CancellationYes
Waterproof RatingIPX5
Weight (per earbud)5.2g
MaterialMetal, PVC
CertificationCE, FCC, RoHS
Number Of Drivers6
Total Harmonic Distortion0.02%
Vocalism PrincipleDynamic
Sound IsolatingYes
Earcups TypeSealed
Headphone Pads MaterialSilicone
Magnet TypeNeodymium
Line Length0m
Plug TypeNone
Support Memory CardNo

Setup Instructions

1. Charging the Earbuds and Case

Before first use, fully charge your UGREEN ClipBuds and their charging case. Connect the charging cable to the case and a power source. The indicator light on the case will show charging status.

A 10-minute charge provides approximately 2 hours of playtime. A full charge of the case provides up to 30 hours of total playtime, with earbuds offering up to 7 hours on a single charge.

UGREEN ClipBuds charging case and earbuds, showing 30 hours total playtime, 7 hours on single charge, and 10 mins charging for 2 hours playtime.

Image: Charging information for UGREEN ClipBuds.

2. Wearing Your ClipBuds

The ClipBuds feature an open-ear design for comfort and situational awareness. To wear them:

  1. Find the earbuds vent.
  2. Secure the earbud to your auricle (outer ear) and adjust for a comfortable and stable fit. The cloud-cushioned design and memory wire ensure stability.
Diagram showing two steps to wear UGREEN ClipBuds: Step 1, find the earbuds vent; Step 2, secure the earbud to the auricle and adjust for fit.

Image: Instructions for correctly wearing the ClipBuds.

Close-up of UGREEN ClipBuds showing cloud-cushioned design, memory wire for stability, and featherlight 5.2g weight.

Image: Features contributing to comfortable and stable wear.

3. Initial Pairing

  1. Open the charging case. The earbuds will automatically enter pairing mode.
  2. On your device (smartphone, tablet, etc.), enable Bluetooth and search for "UGREEN ClipBuds" in the list of available devices.
  3. Select "UGREEN ClipBuds" to connect. You will hear a confirmation tone once connected.

Your ClipBuds support simultaneous connection to two devices, allowing for one-tap switching without re-pairing. To use this feature, enable 'Dual Link' in the UGREEN app.

Image showing a smartphone and a tablet simultaneously connected to UGREEN ClipBuds, illustrating the Dual Link feature for one-tap switching.

Image: Dual Link feature for connecting to two devices simultaneously.

Operating Instructions

Touch Controls

The UGREEN ClipBuds feature seamless touch controls for easy management of music and calls.

Diagram illustrating touch controls for UGREEN ClipBuds: Music/Game Mode Switch (Triple-tap R earbud), Play/Pause (Double-tap L/R earbud), Previous Track (Press and hold L earbud for 1 sec), Next Track (Press and hold R earbud for 1 sec), Answer/End Call (Double-tap L/R earbud), Decline Incoming Call (Press and hold L/R earbud for 1 sec), Activate Voice Assistant (Triple-tap L earbud).

Image: Detailed touch control functions for ClipBuds.

  • Play/Pause: Double-tap either the Left (L) or Right (R) earbud.
  • Next Track: Press and hold the Right (R) earbud for 1 second.
  • Previous Track: Press and hold the Left (L) earbud for 1 second.
  • Answer/End Call: Double-tap either the L/R earbud.
  • Decline Incoming Call: Press and hold either the L/R earbud for 1 second.
  • Activate Voice Assistant: Triple-tap the Left (L) earbud.
  • Music/Game Mode Switch: Triple-tap the Right (R) earbud.
  • Volume Control: Yes (from specifications).
  • Active Noise-Cancellation: Yes (from specifications). To toggle ANC, press and hold either earbud for 2 seconds.

UGREEN Home App Control

Unlock additional features and customization options by connecting your ClipBuds to the UGREEN Home app. The app allows you to:

  • Monitor Battery Level Display.
  • Choose from 8 Custom EQ Presets (Classic, Pop, Electronic, Rock, etc.).
  • Activate Game Mode for Low Latency.
  • Utilize Spatial Sound Effects.
  • Use the "Find Your Earbuds" feature.
  • Enable Dual Link for simultaneous device connection.
Screenshots of the UGREEN Home app interface showing battery level, EQ presets, game mode, spatial sound effects, find your earbuds, and dual link features.

Image: UGREEN Home App interface showcasing various features.

Maintenance

Water Resistance (IPX5)

The UGREEN ClipBuds are IPX5 water-resistant, meaning they can withstand splashes of water and sweat. This makes them suitable for workouts and outdoor activities. However, they are not designed for submersion in water. Avoid exposing them to heavy rain or swimming.

UGREEN ClipBuds earbuds with water droplets, illustrating IPX5 water resistance.

Image: ClipBuds demonstrating IPX5 water resistance.

General Care

  • Clean the earbuds and charging case regularly with a soft, dry cloth.
  • Avoid using abrasive cleaners or solvents.
  • Store the earbuds in their charging case when not in use to protect them and keep them charged.
  • Keep the charging contacts on the earbuds and inside the case clean and dry.

Troubleshooting

  • Earbud Not Charging/Working: If an earbud is not charging or responding, ensure it is properly seated in the charging case and the charging contacts are clean. If the issue persists, try resetting the earbuds (refer to the full user manual for specific reset instructions if available).
  • Pairing Issues: If the earbuds fail to pair, ensure they are in pairing mode (open the case). Turn off and on Bluetooth on your device, and try re-pairing. Ensure the earbuds are sufficiently charged.
  • Sound Quality Concerns (e.g., "too much bass", "poor sound"): While the ClipBuds are designed for HiFi sound with enhanced bass, personal preference varies. Try adjusting the equalizer settings via the UGREEN Home app to customize the sound profile.
  • Noise Cancellation Effectiveness: The ClipBuds feature Active Noise Cancellation (ANC). If you feel it's not effective, ensure the earbuds are properly seated in your ears. Note that ANC performance can vary based on the type of ambient noise. To toggle ANC, press and hold the earbud for 2 seconds.
  • Microphone Quality During Calls: The ClipBuds feature 4-Mic ENC technology for clear calls. If call quality is poor, ensure the microphones are not obstructed and you are in an area with good signal.
  • Left Earbud Muted/Lower Volume: This could indicate a fault. Ensure both earbuds are fully charged and try re-pairing. If the problem continues, contact customer support.
  • Case Indicator Not Working/Not Blocking Earbuds: Ensure the case is charged. If the indicator is faulty or the case isn't properly interacting with the earbuds, a reset or contact with support may be necessary.
  • No Auto-Pause: The product specifications do not explicitly mention an auto-pause feature when earbuds are removed.
  • Connecting to Two Devices: This feature, "Dual Link," needs to be enabled via the UGREEN Home app.

User Tips

  • Customizing Sound: If you find the bass too strong or want a different sound profile, use the UGREEN Home app to adjust the 8 custom EQ presets.
  • ANC Control: To toggle Active Noise Cancellation, press and hold the earbud for 2 seconds.
  • Comfort for Small Ears: The ClipBuds come with replaceable pads. Experiment with different sizes to find the most comfortable and secure fit, especially for smaller ears.
  • Dual Device Connectivity: Remember to enable the "Dual Link" feature in the UGREEN Home app to seamlessly switch between two connected devices.
  • Exercise Use: The IPX5 rating makes these suitable for sports and exercise, offering sweat and splash resistance.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official UGREEN website or contact their customer service directly. Keep your proof of purchase for any warranty claims.

© 2023 UGREEN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.