1. Introduction
The A-BF RX-700 / HT-H8 Infrared Thermal Imaging Camera is a professional, precise, and efficient device designed to combine surface temperature measurement with real-time thermal imaging. It can blend visible and infrared images, making it suitable for a wide range of applications including industrial inspections, electrical fault detection, HVAC/R diagnostics, and automotive repair.
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your thermal imaging camera.
2. Package Contents
Upon opening the package, please verify that all items listed below are present and in good condition:
- A-BF RX-700 / HT-H8 Thermal Imaging Camera
- Protective Carrying Case
- USB Charging Cable
- Power Adapter
- Instruction Manual

3. Device Overview
Familiarize yourself with the components and controls of your thermal imaging camera.

- USB Charging / Transferring Pictures Port: Located under a protective cap, used for charging the device and transferring images to a computer.
- Lens Protective Cap: Covers and protects the infrared lens when not in use.
- Adjust Focus: A knob near the lens to manually adjust the focus for clearer images.
- Lens: The infrared sensor lens.
- Menu / Switch Button: Accesses the device menu and can also function as a power switch.
- Capture Image Button: Triggers image capture.
- Select Key (Navigation Buttons): Used to navigate through menu options.
- Enter Key: Confirms selections in the menu.

4. Specifications
| Feature | Specification |
|---|---|
| Display Screen | 3.5-inch full view angle TFT screen |
| Infrared Image Resolution | 384 x 288 pixels |
| Display Screen Resolution | 640 x 480 pixels |
| Focus Length | 13mm |
| Thermal Sensitivity | ≤60mk@25℃, F#1.0 |
| Temperature Range | -20℃~550℃ (-4°F~1022°F) |
| Measurement Accuracy | ±3% |
| Wavelength Coverage | 8-14μm |
| Frame Rate of Thermal Images | 25Hz/50Hz |
| Working Temperature | 0℃~45℃ |
| Storage Temperature | -20℃~60℃ |
| Color Palettes | Rainbow, Iron Oxide Red, Cold Color, Black Hot, White Hot |
| File Format | JPG |
| Power Supply | Built-in rechargeable lithium battery |
| Product Size | 256 x 97.2 x 128.9mm (approx. 10.08 x 3.83 x 5.07 inches) |
5. Setup
5.1 Initial Charging
Before first use, fully charge the thermal imaging camera. Connect the USB charging cable to the camera's USB port (located under the protective cap) and the other end to the power adapter. Plug the adapter into a standard electrical outlet. The charging indicator will show the charging status.
5.2 Powering On/Off
To power on the device, press and hold the 'Menu / Switch' button until the screen illuminates. To power off, press and hold the 'Menu / Switch' button again until the screen turns off.
6. Operating Instructions
6.1 Basic Operation
- Capturing an Image: Point the camera at the target. Press the 'Capture Image' button to save the current thermal image. Images are saved in JPG format.
- Navigation: Use the 'Select Key' (up, down, left, right arrows) to navigate through menu options. Press the 'Enter Key' to confirm a selection.
6.2 Focus Adjustment
For clear thermal images, especially at varying distances, manual focus adjustment is crucial. Rotate the 'Adjust Focus' knob near the lens.
- Turning counter-clockwise: Adjusts for far focus.
- Turning clockwise: Adjusts for close focus.

6.3 Screen Elements and Color Palettes
The display screen provides various information and allows for customization of the thermal view.

Screen Elements:
- Center point temperature
- WiFi status (On/Off)
- Current emissivity setting (e.g., e=0.95)
- Battery Power indicator
- Maximum value of field temperature
- Center point crosshair
- Minimum value of field temperature
- Temperature scale
Note: The crosshair may not be in the exact center of the image due to calibration. This offset ensures alignment and accuracy of laser pointers and the infrared thermometer.
Color Palettes: The camera offers several color palettes to visualize temperature differences. You can select from: Rainbow, Iron Oxide Red, Cold Color, Black Hot, and White Hot.
6.4 WiFi Connection and Real-time Imaging
The camera supports real-time imaging on mobile devices (Android, Apple) and PCs via WiFi.

Steps to Connect via WiFi:
- Turn on WiFi: Open the camera's MENU and navigate to the WiFi option to turn it 'On'.
- Connect to Camera's WiFi: On your mobile device or PC, search for available WiFi networks and connect to the network named 'ThermalCamera-xxxxxx' (where 'xxxxxx' are the last six digits of the camera's MAC address).
- Access Real-time Stream: Open a web browser on your connected device and enter the IP address
192.168.230.1in the address bar. - View and Control: Once connected, you can view the real-time thermal image stream. From the mobile interface, you can often adjust settings such as color palette, blending degree, emissivity, maximum/minimum values, and language.

6.5 Image Transfer via USB
To transfer captured images to a computer:
- Connect the camera to your computer using the provided USB cable.
- The camera should appear as a removable storage device on your computer.
- Navigate to the camera's storage and copy the JPG image files to your computer.

7. Applications
The A-BF RX-700 / HT-H8 is designed to quickly identify invisible problems across various fields:

- Facility Maintenance: Detect overheating components in electrical systems, identify insulation issues, and inspect machinery.
- Electrical: Pinpoint hot spots in circuit boards, wiring, and electrical panels to prevent failures.
- HVAC/R: Diagnose issues in heating, ventilation, air conditioning, and refrigeration systems by identifying temperature anomalies.
- Auto Repair & Mechanical: Locate overheating engine parts, brake issues, or fluid leaks in vehicles and other mechanical systems.
8. Maintenance
8.1 Cleaning
- Camera Body: Use a soft, damp cloth to clean the exterior of the camera. Do not use abrasive cleaners or solvents.
- Lens: Gently clean the lens with a lens cleaning cloth or a soft, lint-free cloth. Avoid touching the lens surface with your fingers.
- Screen: Use a soft, dry cloth to wipe the display screen.
8.2 Storage
- Store the camera in its protective carrying case when not in use to prevent damage.
- Keep the device in a dry environment, away from extreme temperatures (storage temperature: -20℃~60℃) and direct sunlight.
- Ensure the lens protective cap is in place during storage.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery; Power button not pressed long enough | Charge the battery fully; Press and hold the 'Menu / Switch' button for a few seconds. |
| Image is blurry | Out of focus; Dirty lens | Adjust the 'Adjust Focus' knob; Clean the lens gently with a lens cloth. |
| Cannot connect to WiFi | WiFi not enabled on camera; Incorrect network selected; Wrong IP address | Enable WiFi in camera menu; Select 'ThermalCamera-xxxxxx' network; Ensure IP 192.168.230.1 is entered correctly. |
| Images not saving | Memory full; Corrupted memory | Transfer images to a computer and delete from camera; If issues persist, consider formatting the internal memory (refer to advanced settings in menu) or contacting support. |
10. User Tips
- Emissivity Settings: For accurate temperature readings, ensure the emissivity setting matches the material being inspected. Different materials have different emissivities. Consult an emissivity table if unsure.
- Optimal Focus: Always adjust the focus for the clearest image possible. A sharp image leads to more accurate temperature measurements.
- Environmental Factors: Be aware that environmental factors like humidity, air temperature, and distance can affect thermal readings.
- Battery Life: To maximize battery life, turn off WiFi when not actively streaming and reduce screen brightness if possible.
11. Warranty and Support
This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including warranty period and coverage details.
For technical support, service, or warranty claims, please contact your retailer or the manufacturer directly. Contact information can typically be found on the product packaging or the manufacturer's official website.