Sanyun SW010 Computer Speakers User Manual

1. Introduction

The Sanyun SW010 is a versatile computer soundbar designed to enhance your audio experience. Featuring a sleek, pentagonal strip structure and a compact design, it fits seamlessly into any desktop setup. It offers dual connectivity modes: a wired USB-A connection with a built-in 16-bit DAC for high-fidelity digital audio, and Bluetooth 5.0 for wireless streaming. The SW010 delivers clear, powerful, and rich sound through its 2x4W speaker units and a bass diaphragm, complemented by anti-magnetic technology to minimize noise.

Figure 1: Sanyun SW010 Computer Speaker

2. Key Features

• Compact Design: Regular pentagonal strip structure (26.5x5x5cm) saves desktop space.
• High-Fidelity Sound: 2 x 4W speaker units with 1 x bass diaphragm for clear, powerful, and rich audio.
• Built-in 16-bit DAC: For direct digital audio signal parsing, reducing loss and ensuring original sound quality via USB.
• Dual Connectivity: Wired USB-A and Bluetooth 5.0 for versatile device compatibility (PC, laptop, tablet, phone).
• Anti-Magnetic Technology: Suppresses static and other noise for a cleaner sound experience.
• Easy Control: Single multi-function knob for power on/off, mode switching, and volume adjustment.
• Plug & Play: No drivers or software installation required for USB connection.

Figure 2: Internal Components of the SW010 Speaker

3. Package Contents

The Sanyun SW010 Computer Speakers package typically includes:

• Sanyun SW010 Computer Speaker
• USB-A to Micro USB Cable (for power and wired audio)
• User Manual (this document)

Note: Specific package contents may vary slightly.

4. Setup

The Sanyun SW010 speaker is designed for simple plug-and-play operation. Follow these steps to set up your speaker:

1. Placement: Place the speaker on a stable surface, ideally under your computer monitor or in front of your laptop, to optimize sound delivery and save space. The speaker dimensions are 26.5cm x 5cm x 5cm.
2. Power and Audio Connection (Wired Mode):
   • Connect the Micro USB end of the provided USB-A to Micro USB cable to the "USB 5V" port on the back of the speaker.
   • Connect the USB-A end of the cable to an available USB-A port on your computer (PC, laptop). This single connection provides both power and digital audio signal to the speaker.
   • Once connected, the power light on the speaker will illuminate, indicating it is powered on.
   

   Figure 3: USB-A Wired Connection Setup

3. Power Connection (Bluetooth Mode Only):
   • If you intend to use the speaker exclusively in Bluetooth mode and power it via a power bank or a USB wall adapter, connect the Micro USB end of the cable to the speaker and the USB-A end to your power source.
   • Note: When powered by a power bank or adapter, only Bluetooth mode is available for audio playback.
   

   Figure 4: Speaker Powered via USB Adapter

5. Operating Instructions

The Sanyun SW010 features a single multi-function knob for all primary controls.

Figure 5: Multi-function Control Knob

• Power On/Off: Long press the control knob to turn the speaker on or off.
• Adjust Volume: Rotate the control knob clockwise to increase volume and counter-clockwise to decrease volume.
• Change Mode: Short press the control knob to switch between PC (Wired USB) mode and Bluetooth mode.
  • Red Light: Indicates PC (Wired USB) Mode.
  • Blue Light: Indicates Bluetooth Mode.
• Bluetooth Pairing:
  1. Ensure the speaker is in Bluetooth mode (blue light). If not, short press the knob to switch.
  2. On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
  3. Select "Sanyun SW010" from the list to pair. Once paired, the blue light may become solid or indicate a connected state.

6. Maintenance

To ensure the longevity and optimal performance of your Sanyun SW010 speakers, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe the exterior of the speaker. Do not use liquid cleaners, aerosols, or solvents, as they may damage the finish or internal components.
• Storage: When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid Moisture: Keep the speaker away from water and high humidity. It is not waterproof.
• Handle with Care: Avoid dropping or subjecting the speaker to strong impacts.

7. Troubleshooting

8. Specifications

9. User Tips

• For optimal wired audio performance, connect the speaker directly to a USB port on your computer.
• If powering the speaker via a USB wall adapter or power bank, remember that only Bluetooth audio playback will function. The wired audio signal requires a direct connection to a computer's data-enabled USB port.
• The speaker requires an input power of less than 25W. Ensure your power source meets this requirement.
• Experiment with speaker placement to find the best sound for your listening environment. Placing it directly under your monitor can create a more immersive experience.

10. Warranty and Support

SANYUN products are manufactured to the highest quality standards. For any technical assistance, warranty claims, or product-related inquiries, please contact the seller or refer to the official SANYUN support channels.

Please retain your proof of purchase for warranty purposes.