Introduction
The Konus Konustar-10 is a robust liquid compass designed for reliable orientation and precise measurements in various outdoor environments. Its durable metal body ensures longevity, making it an ideal companion for hiking, camping, and other navigational activities. This manual provides detailed instructions on how to set up, operate, and maintain your Konustar-10 compass to ensure optimal performance.

Components Overview
The Konustar-10 compass integrates several key features for comprehensive navigation and measurement:
- Liquid-filled Dial: Ensures stable and accurate needle readings.
- Sighting Device (Visir): For precise bearing acquisition.
- Bubble Level: To ensure the compass is held perfectly horizontal for accurate readings.
- Clinometer: For measuring angles of inclination or declination (slopes).
- Rulers and Scales: Integrated along the edges for map work, including a 1:25000 scale and linear measurements in meters.
- Tripod Mount: Allows for stable, stationary use.
- Metal Body: Provides durability and protection.

Setup
Before using your Konustar-10 compass, ensure it is ready for accurate readings:
- Unfold the Compass: Carefully open the compass until it lies flat or is positioned for sighting, as shown in Figure 2.
- Check the Bubble Level: For accurate readings, the compass must be perfectly level. Use the integrated bubble level (visible when open) to ensure the compass is horizontal. Adjust your hand or the tripod until the bubble is centered.
- Clear Magnetic Interference: Ensure you are away from any objects that could interfere with the compass needle, such as mobile phones, metal objects, or power lines.
Operating Instructions
Basic Orientation and Bearing
- Hold the compass level (check the bubble level).
- Allow the needle to settle. The red end of the needle typically points North.
- Rotate the compass body until the North marking on the dial aligns with the North-pointing needle. You are now oriented.
- To take a bearing to an object, use the sighting device. Align the front sight with the target and read the bearing from the compass dial.
Using the Clinometer (Inclination Measurement)
The clinometer measures the angle of a slope or elevation.
- Open the compass fully to expose the clinometer scale.
- Hold the compass on its side, aligning the base with the slope you wish to measure.
- Read the angle indicated by the clinometer needle against its scale.
Using Rulers and Scales for Map Work
The compass features integrated rulers and scales for use with maps.
- Linear Rulers: Use the centimeter/inch rulers along the compass edges (Figure 3) for direct distance measurements on a map.
- Map Scale (e.g., 1:25000): Align the appropriate map scale on the compass with the corresponding scale on your map to measure distances accurately.

Interpreting the Conversion Table
The underside of the compass features a conversion table (Figure 4) that can assist in calculating distances and gradients based on observed angles.

This table provides conversions for:
- Angle (Angolo): Measured in degrees (0-360° and 0-400°).
- Gradient (Pendenza): Expressed as a percentage (%).
- Distance (Distanza): Provides a ratio (e.g., 1/100, 1/20) for calculating distances based on observed angles and known heights.
Refer to this table for quick field calculations related to terrain features.
Maintenance
To ensure the longevity and accuracy of your Konustar-10 compass:
- Cleaning: Wipe the compass with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the casing or clear viewing windows.
- Storage: Store the compass in a cool, dry place, away from strong magnetic fields (e.g., magnets, speakers, large electronic devices) when not in use.
- Protection: While the metal body is durable, avoid dropping the compass or subjecting it to severe impacts, which could affect its internal mechanisms.
Troubleshooting
If you encounter issues with your compass, consider the following:
- Inaccurate Readings: Ensure you are away from magnetic interference. Check that the compass is perfectly level using the bubble level.
- Sluggish Needle: This is common in liquid-filled compasses, especially in cold temperatures. Allow the compass to warm up slightly, or gently tap it to free the needle. If the needle remains sluggish or sticks, the liquid may be compromised, and the compass may require professional inspection.
- Fogging: Minor internal fogging can occur due to temperature changes. This usually dissipates on its own. If persistent, it might indicate a seal issue.
Specifications
| Feature | Description |
|---|---|
| Model | Konustar-10 |
| Type | Liquid Compass |
| Body Material | Metal |
| Key Features | Clinometer, Sighting Device (Visir), Bubble Level, Rulers (e.g., 1:25000 scale), Tripod Mountable |
| Measurements | Angle, Gradient, Distance (via conversion table) |
| Color | Grey |
User Tips
- Practice using your compass in a familiar area before relying on it in challenging terrain.
- Always carry a map along with your compass and know how to use them together.
- Be aware of magnetic declination in your area and adjust your readings accordingly for true North.
- When using the clinometer, ensure your eye is level with the base of the compass for the most accurate slope measurement.
Warranty & Support
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.