1. Introduction
The Hantek 6074 Series USB Digital Storage Oscilloscopes are versatile and portable instruments designed for a wide range of electronic measurements, with a particular focus on automotive diagnostics. These devices offer 4 channels, a bandwidth of up to 70MHz, and a real-time sampling rate of 1GSa/s, making them suitable for detailed waveform analysis. Their compact design and USB 2.0 interface ensure ease of use and portability, compatible with Windows 7, 8, and 10 operating systems.
2. Key Features
- Multi-Channel: 4 isolated channels for simultaneous signal analysis.
- High Performance: Up to 70MHz bandwidth and 1GSa/s real-time sampling rate.
- Memory Depth: 64K memory depth for capturing longer waveforms.
- Automotive Diagnostics: Standard equipped with over 80 types of automotive measurement functions (e.g., Ignition Action, Sensor, Bus Diagnosis, Performer, Startup & Charge).
- PC Compatibility: Supports Windows 7, Windows 8, and Windows 10 operating systems.
- Plug & Play: USB 2.0 interface for easy connection without external power.
- Advanced Measurement: Over 20 automatic measurement functions, PASS/FAIL check, resourceful trigger functions, dynamic cursor tracking, waveform record and replay.
- Waveform Analysis: Supports waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display, and FFT spectrum analysis.
- Data Export: Waveform data can be output to EXCEL, BMP, and JPG formats.
- Expandability: Multiple oscilloscopes can be connected to one computer to easily expand the number of channels.
- Development Support: Provides secondary development library DLL and development examples for Labview, VB, VC, and QT.
3. Models and Specifications
The Hantek 6074 Series offers several models with varying bandwidths and features. All models feature 4 channels, 1GSa/s real-time sampling, and 64K storage depth.
3.1. Hantek 6074BE Specifications
| Parameter | Specification |
|---|---|
| Model | Hantek6074BE |
| Bandwidth | 70MHz |
| Automotive Measurement Function | Intake manifold vacuum & ignition; Petrol fumes adjusting valve vacuum & ignition; Idle exhaust ignition; Starting exhaust ignition; Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position; CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus; Performer: Petrol/Diesel; Starter and charging circuits |
| Channel | 4 CH |
| Real-time Sampling Rate | 1GSa/s |
| Memory Depth | 64K |
| Time Base Precision | ±50ppm |
| Time Base Range | 2ns/div-1000s/div (1-2-4 sequences) |
| Input Impedance | 1MΩ 25pF |
| Input Sensitivity | 2mV/div~10V/div |
| Vertical Resolution | 8Bit |
| Vertical Displacement Range | 2mV ~ 10V/div @ x1 probe; 20mV ~ 100V/div @ x10 probe; 200mV ~ 1000V/div @ x100 probe; 2V ~ 10000V/div @ x1000 probe |
| DC Gain Accuracy | ±3% |
| Bandwidth | 20MHz |
| Trigger Mode | Edge, Pulse, Video, Alternative |
| Trigger Source | CH1, CH2, CH3,CH4 |
| Waveform Signal Process | +,-,x,÷,FFT, Invert |
| Cursors Measurement | Cross, Trace, Horizontal, Vertical |
| Auto Measurement | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
| Volume | 175mm * 105mm * 25mm |
| Weight | 0.9KG |
3.2. Hantek 6074BC Specifications
| Parameter | Specification |
|---|---|
| Model | Hantek6074BC |
| Bandwidth | 70MHz |
| Channel | 4 CH |
| Real-time Sampling Rate | 1GSa/s |
| Memory Depth | 64K |
| Time Base Precision | ±50ppm |
| Time Base Range | 2ns/div-1000s/div (1-2-4 sequences) |
| Input Impedance | 1MΩ 25pF |
| Input Sensitivity | 2mV/div~10V/div |
| Vertical Resolution | 8Bit |
| Vertical Displacement Range | 2mV ~ 10V/div @ x1 probe; 20mV ~ 100V/div @ x10 probe; 200mV ~ 1000V/div @ x100 probe; 2V ~ 10000V/div @ x1000 probe |
| DC Gain Accuracy | ±3% |
| Bandwidth limit | 20MHz |
| Trigger Mode | Edge, Pulse, Video, Alternative |
| Trigger Source | CH1, CH2, CH3,CH4 |
| Waveform Signal Process | +,-,x,÷,FFT, Invert |
| Cursors Measurement | Cross, Trace, Horizontal, Vertical |
| Auto Measurement | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
| Volume | 175mm * 105mm * 25mm |
| Weight | 0.9KG |
3.3. Hantek 6074BD Specifications
| Parameter | Specification |
|---|---|
| Model | Hantek6074BD |
| Bandwidth | 70MHz |
| Channel | 4 CH |
| Real-time Sampling Rate | 1GSa/s |
| Memory Depth | 64K |
| Time Base Precision | ±50ppm |
| Time Base Range | 2ns/div-1000s/div (1-2-4 sequences) |
| Input Impedance | 1MΩ 25pF |
| Input Sensitivity | 2mV/div~10V/div |
| Vertical Resolution | 8Bit |
| Vertical Displacement Range | 2mV ~ 10V/div @ x1 probe; 20mV ~ 100V/div @ x10 probe; 200mV ~ 1000V/div @ x100 probe; 2V ~ 10000V/div @ x1000 probe |
| DC Gain Accuracy | ±3% |
| Bandwidth | 20MHz |
| Trigger Mode | Edge, Pulse, Video, Alternative |
| Trigger Source | CH1, CH2, CH3,CH4 |
| Waveform Signal Process | +,-,x,÷,FFT, Invert |
| Cursors Measurement | Cross, Trace, Horizontal, Vertical |
| Auto Measurement | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
| Volume | 175mm * 105mm * 25mm |
| Weight | 0.9KG |
| Accessory | 2 passive probes, 2 gator clip lines |
4. Package Contents
The standard package for the Hantek 6074BE model includes:
- 1 x Hantek 6074BE USB Oscilloscope
- 1 x HT307 Probe
- 1 x HT19 Probe
- 1 x HT18A Probe
- 1 x HT30A Probe
- 3 x Gator Clip Lines
- 1 x HT25 Cable
- 1 x USB Cable
- 1 x CD (containing driver and manual)
- 1 x User Manual (electronic)
For the Hantek 6074BC model, the package typically includes:
- 1 x Hantek 6074BC USB Oscilloscope
- 2 x Oscilloscope Probes (Note: Only 2 probes are included in the package. Additional probes may need to be purchased separately.)
- 2 x BNC - Clip Cables
- 1 x USB Cable
- 1 x CD (containing driver and manual)
5. Setup
-
5.1. Software Installation
Insert the provided CD into your computer's CD-ROM drive. Follow the on-screen instructions to install the Hantek 6000 Series software. Ensure your operating system (Windows 7, 8, or 10) is supported. The software interface allows for language selection, including English, Dutch, German, French, Polish, Russian, and Spanish.
Figure 4: Software language selection in Hantek 6000 Series application. -
5.2. Hardware Connection
Connect the Hantek oscilloscope to your computer using the supplied USB cable. The device is plug-and-play and does not require an external power supply.
Figure 5: Side view of the Hantek Oscilloscope with USB and BNC ports. -
5.3. Connecting Probes for Automotive Testing
For automotive diagnostics, connect the appropriate probes (e.g., ignition probes, gator clip lines) to the BNC input channels (CH1, CH2, CH3, CH4) on the oscilloscope. Ensure secure connections. The device supports various automotive tests, including ignition, sensor, and bus diagnosis.
Video 1: Demonstration of connecting probes for automotive ignition testing using the Hantek 6074BE.
6. Operating Instructions
-
6.1. Launching the Software
After installing the software and connecting the oscilloscope, launch the Hantek 6000 Series application from your desktop or Start menu. The software will automatically detect the connected device.
-
6.2. Basic Waveform Display
The main interface will display the waveforms from the connected channels. You can adjust vertical and horizontal scales, trigger settings, and other parameters using the controls within the software.
Figure 6: Multiple waveforms displayed on the Hantek 6000 software interface. -
6.3. Automotive Diagnostic Functions
Navigate to the 'Vehicle Diagnosis' menu within the software to access specialized automotive tests. This menu provides options for various diagnostic categories such as Ignition, Sensors, Bus Diagnosis, and more.
Figure 7: Vehicle Diagnosis menu in the Hantek 6000 software. For example, to perform an ignition test, select 'Ignition' and then choose the specific type of ignition test (e.g., Primary, Secondary). The software will guide you through the connection and display the relevant waveforms.
Figure 8: Example of a secondary ignition waveform display. -
6.4. Measurement and Analysis
The software offers various measurement tools:
- Automatic Measurements: Access over 20 automatic measurements like Vpp, Vmax, Frequency, Period, etc., from the 'Measure' menu.
- Cursors: Use horizontal and vertical cursors for precise manual measurements.
- Waveform Processing: Perform mathematical operations (+,-,x,÷), FFT analysis, and invert waveforms.
Figure 9: Measurement menu for detailed waveform analysis.
7. Maintenance
To ensure the longevity and optimal performance of your Hantek oscilloscope, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the device. Avoid using abrasive cleaners or solvents that could damage the casing or screen.
- Storage: Store the oscilloscope in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Cable Care: Handle USB and probe cables carefully. Avoid bending or crimping them excessively to prevent internal damage.
- Software Updates: Regularly check the Hantek website for software updates to ensure you have the latest features and bug fixes.
8. Troubleshooting
If you encounter issues with your Hantek oscilloscope, consider the following common troubleshooting steps:
- Device Not Recognized: Ensure the USB cable is securely connected to both the oscilloscope and the computer. Verify that the software drivers are correctly installed. Try connecting to a different USB port or computer.
- No Waveform Display: Check that probes are properly connected to the input channels and the circuit under test. Verify trigger settings are appropriate for the signal being measured.
- Software Issues: Restart the Hantek 6000 Series software and/or your computer. Reinstall the software if problems persist.
- Incorrect Readings: Ensure probes are correctly calibrated and set to the appropriate attenuation (e.g., x1, x10). Check for proper grounding.
9. User Tips
- Language Settings: The software supports multiple languages. If you need to change the display language, navigate to the software settings (refer to Figure 4 for an example of the language selection menu).
- DC and AC Readings: The oscilloscope is capable of both DC and AC measurements. Ensure the correct coupling (DC or AC) is selected in the software for accurate readings.
- Attenuator Use: For high voltage signals, an attenuator (if included or purchased separately) is crucial to protect the oscilloscope and ensure accurate measurements.
- Software Updates: Hantek provides free software upgrades. Regularly check their official website for the latest versions to enhance functionality and performance.
10. Warranty and Support
Hantek provides continuous free software upgrading for their products, ensuring long-term value and improved functionality. For technical support, driver downloads, and the latest electronic manuals, please refer to the official Hantek website. The product is designed for durability with an anodized aluminum casing, offering good heat resistance and abrasive resistance.