Robotime TG507, TG412

Contents

Robotime Rolife DIY 3D Wooden Puzzle Instruction Manual

Models: Big Ben (TG507) & Tower Bridge (TG412)

1. Important Safety Information

  • Warning: This product contains small parts. Keep out of reach of children under 3 years of age to prevent choking hazards.
  • Recommended age for independent assembly is 8 years and older. Children under 8 should complete assembly accompanied by an adult.
  • Handle wooden pieces gently to avoid breakage.

2. Package Contents

Before beginning assembly, please verify that all components are present and undamaged.

  • Pre-cut wooden plywood sheets (various pieces for the chosen model)
  • Detailed graphic instruction manual
  • LED light string (for illumination)

Note: Batteries are NOT included due to customs restrictions. You will need 3x LR44 button cell batteries for each model (Big Ben and Tower Bridge) to power the LED lights.

3. Assembly Instructions (Setup)

Follow the step-by-step instructions provided in your product's specific manual. The assembly process is designed to be straightforward and enjoyable.

  1. Preparation: Carefully remove all wooden pieces from the plywood sheets. It is recommended to use a small tool (like a craft knife or sandpaper, not included) to gently smooth any rough edges if necessary.
  2. Follow the Manual: Refer to the included graphic instruction manual for precise assembly order and connections. Each piece is numbered or uniquely shaped to fit specific slots.
  3. Gentle Assembly: Press pieces together gently. Do not force them, as this may cause breakage. If a piece is difficult to fit, check the orientation or gently widen the slot.
  4. LED Light Installation: Once the main structure is complete, integrate the LED light string according to the manual's diagrams. Ensure the wiring is neatly tucked away and does not interfere with other parts.
  5. Battery Insertion: Locate the battery compartment (usually at the base of the model). Insert 3x LR44 batteries, ensuring correct polarity.

Visual Assembly Guide

For a visual demonstration of the assembly process, please watch the official product video:

Video: Demonstrates the step-by-step assembly of a Rolife 3D wooden puzzle, showcasing how pieces fit together and the final illuminated model.

Assembly in Progress

Hands assembling a wooden puzzle piece

Image: Close-up of hands carefully fitting together wooden puzzle pieces during assembly.

4. Operating the LED Lights

Once the batteries are correctly installed, the LED lights can be operated.

  • Locate the small switch on the battery compartment or base of the model.
  • Flip the switch to the 'ON' position to illuminate the model.
  • Flip the switch to the 'OFF' position to turn off the lights and conserve battery life.

Illuminated Models

Assembled Big Ben model with LED lights on

Image: The Big Ben 3D wooden puzzle fully assembled and illuminated with its internal LED lights.

Assembled Tower Bridge model with LED lights on

Image: The Tower Bridge 3D wooden puzzle fully assembled and illuminated with its internal LED lights.

Both Big Ben and Tower Bridge models assembled and lit

Image: Both the Big Ben and Tower Bridge models displayed side-by-side, showcasing their illuminated details.

5. Maintenance

  • Cleaning: Use a soft, dry cloth or a small brush to gently dust the model. Avoid using water or cleaning solutions, as they may damage the wood.
  • Storage: Store the assembled model in a dry environment away from direct sunlight and extreme temperatures to prevent warping or fading of the wood.
  • Battery Replacement: If the LED lights dim or stop working, replace the LR44 batteries. Ensure proper disposal of used batteries.

6. Troubleshooting

  • Missing or Broken Pieces: If you find any pieces missing or broken upon opening the package, please contact customer support for assistance.
  • Difficulty Assembling: Double-check the instruction manual for the correct orientation and sequence of pieces. Ensure you are not forcing pieces, which can lead to damage.
  • LED Lights Not Working:
    • Ensure batteries are inserted with correct polarity (+/-).
    • Check if the batteries are new and fully charged.
    • Verify that the light string connections are secure and not damaged.
    • Confirm the power switch is in the 'ON' position.

7. Specifications

Big Ben product information with dimensions

Image: Detailed product information for the Big Ben model, including assembly size.

Tower Bridge product information with dimensions

Image: Detailed product information for the Tower Bridge model, including assembly size.

FeatureBig Ben (TG507)Tower Bridge (TG412)
Wood Pieces220 pieces113 pieces
Assembly TimeApprox. 1.5 hours
Assembly Size101 x 107 x 191 mm (4 x 4.2 x 7.5 inches)360 x 75 x 117 mm
Lights IncludedYes (LED string)
Batteries Required3x LR44 (not included) per model
Main MaterialsWooden plywood
Package Size229 x 153.5 x 30.5 mm
Recommended Age8+ (children under 8 with parental supervision)
CertificationsEN71, CE, FSC, FCC
BarcodeYes
High-concerned chemicalNone

8. User Tips

  • Take Your Time: The assembly process is part of the fun. Don't rush, enjoy the intricate details and the satisfaction of building.
  • Be Gentle: While the pieces are sturdy, applying excessive force can cause them to break. If a piece doesn't fit, re-check the instructions and its orientation.
  • Prepare Batteries: Remember that LR44 batteries are not included. Have them ready before you start if you plan to use the lights immediately after assembly.
  • Display with Pride: Once assembled, these models make for a super cool and beautiful display piece, especially with the lights on.

9. Support

For any questions, concerns, or assistance with your Robotime Rolife 3D Wooden Puzzle, please contact the seller or manufacturer's customer support. Provide your product model (TG507 or TG412) and a detailed description of the issue for faster service.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.