Fosi Audio BOX X4

Contents

Fosi Audio BOX X4 Phono Preamp User Manual

For Turntable Phonograph Preamplifier with Vacuum Tube Amplifier HiFi

1. Introduction

The Fosi Audio BOX X4 is a high-fidelity tube phono preamplifier and headphone amplifier designed for MM (Moving Magnet) turntables. It features volume, bass, and treble controls, powered by a DC 12V supply. This compact, ultra-low noise preamp converts phono signals to line-level signals, enhancing your home audio system's performance.

The BOX X4 is currently equipped with 6J1 vacuum tubes, providing a warm and rich sound. It also supports a range of other compatible tubes for sound customization.

2. Package Contents

Please check the box for the following items:

  • Fosi Audio BOX X4 Phono Preamp x1
  • 6J1 Vacuum Tubes x2
  • DC 12V Power Adapter x1 (with regional plug, e.g., US, UK, IT, ES, FR, DE)
  • User Manual x1
Contents of the Fosi Audio BOX X4 package, including the preamp, two vacuum tubes, power adapter, and user manual, with dimensions.
Figure 2.1: What's in the Box (Components and Dimensions)

3. Product Overview & Controls

The Fosi Audio BOX X4 features intuitive controls and versatile connectivity options:

3.1 Front Panel

Front panel of the Fosi Audio BOX X4 showing 3.5mm Headphone Output, Treble Control, Bass Control, and Volume Control/Power Switch.
Figure 3.1: Front Panel Controls
  • 3.5 mm Headphone Output: For connecting headphones.
  • Treble Control: Adjusts high frequencies.
  • Bass Control: Adjusts low frequencies.
  • Volume Control / Power Switch: Turns the unit on/off and adjusts the overall output volume.

3.2 Back Panel

Rear panel of the Fosi Audio BOX X4 showing DC 12V Input, Line In (3.5mm AUX), RCA Output, MM Input, and Grounding Post.
Figure 3.2: Rear Panel Connections
  • DC 12V Input: For connecting the power adapter.
  • LINE IN (3.5mm AUX Input): For connecting external audio sources like smartphones or PCs.
  • RCA Output: For connecting to active (powered) speakers or a power amplifier.
  • MM INPUT (RCA): For connecting an MM turntable.
  • GND (Grounding Post): For connecting the ground wire from your turntable.

4. Setup Guide

Follow these steps to set up your Fosi Audio BOX X4:

4.1 Tube Installation

  1. Carefully insert the two 6J1 vacuum tubes into their respective sockets on the BOX X4. Ensure they are fully seated.
Video 4.1: How to Hook up the Box X4 Tube MM Phono Preamplifier (Tube installation shown at 0:06)

4.2 Connecting to Your Audio System

The BOX X4 can be integrated into your stereo system in various ways. Here's a common setup:

Diagram showing connection of BOX X4 to a turntable, various audio sources (tablet, laptop, PC), headphones, active speakers, and a power amplifier with passive speakers.
Figure 4.2: System Connection Diagram
  1. Connect Output:
    • To Active Speakers: Use an RCA cable to connect the RCA OUTPUT of the BOX X4 to the RCA input of your active (powered) speakers.
    • To a Power Amplifier: Use an RCA cable to connect the RCA OUTPUT of the BOX X4 to the RCA line input of your power amplifier. Then, connect your passive speakers to the power amplifier.
    • To Headphones: Plug your 3.5mm headphones into the 3.5mm Headphone Output on the front panel.
  2. Connect Input (Audio Source):
    • MM Turntable: Use an RCA cable to connect your MM turntable's RCA outputs to the MM INPUT (RCA) on the back of the BOX X4. If your turntable has a ground wire, connect it to the GND (Grounding Post) on the BOX X4. If your turntable has a built-in phono preamp that cannot be bypassed, use the 3.5mm AUX input instead.
    • Other Audio Devices (e.g., Phone, PC): Use a 3.5mm audio cable to connect your device's audio output to the LINE IN (3.5mm AUX Input) on the back of the BOX X4.
  3. Power Connection:
    • Ensure the Volume Control/Power Switch on the front panel is in the 'OFF' position (fully counter-clockwise).
    • Connect the DC 12V power adapter to the DC 12V Input on the back of the BOX X4.
    • Plug the power adapter into a wall socket. The power adapter does not have an indicator light; connection to the socket means it is powered.

For more detailed instructions, please refer to the official user manual PDF available from the seller.

5. Operation

Once all connections are made, you can begin using your Fosi Audio BOX X4:

  1. Power On: Turn the Multi-function Knob (Volume Control/Power Switch) clockwise to power on the BOX X4. The vacuum tubes will light up.
  2. Power-on Sequence: To avoid a 'POP' sound, turn on the BOX X4 first, then your amplifier (or powered speakers), and finally your turntable or other audio source.
  3. Adjust Volume: Continue turning the Multi-function Knob clockwise to increase the volume. Turn counter-clockwise to decrease.
  4. Adjust Tone: Use the 'TREBLE' and 'BASS' knobs on the front panel to fine-tune the sound to your preference.
  5. Input Switching: The BOX X4 automatically prioritizes the 3.5mm AUX input. If a 3.5mm AUX cable is plugged in, the MM turntable input will be interrupted. To use the MM input, disconnect the 3.5mm AUX cable.
  6. Simultaneous Outputs: Both the 3.5mm headphone output and RCA output can be used simultaneously.

6. Maintenance

  • Keep the unit clean by wiping it with a soft, dry cloth.
  • Avoid exposing the unit to moisture, direct sunlight, or extreme temperatures.
  • Ensure proper ventilation around the unit, especially around the vacuum tubes, to prevent overheating.
  • When replacing vacuum tubes, ensure the unit is powered off and unplugged. Allow tubes to cool before handling.

7. Troubleshooting & FAQ

7.1 Common Issues

  • No audio output:
    • Ensure all connected devices (BOX X4, amplifier/speakers, audio source) are powered on and in working mode.
    • Check if the vacuum tubes are lit.
    • Verify that the music in your audio source is not paused.
    • Confirm the correct input mode is selected (3.5mm AUX has priority over MM input).
    • Try using a different 12V power adapter (any DC12V adapter compatible with the BOX X4 can be used for testing).
    • Ensure all cables are fully inserted into their respective ports.
  • Noise/Humming:
    • When no inputs are connected, the BOX X4 defaults to MM input mode, which has high gain and may produce some humming. This is normal.
    • Unplug all inputs from the BOX X4 to determine if the noise originates from the audio source or cables.
    • Ensure all cables are completely pushed into the device.
    • Verify your turntable is an MM output type and does not have an active built-in phono preamp that cannot be bypassed.
    • Ensure the grounding wire from your turntable is properly connected to the GND post on the BOX X4.
    • Keep the device away from other electronic devices like FM radios or Wi-Fi routers.
    • Ensure the vacuum tubes are fully inserted into their sockets.
    • Adjust the treble volume on the BOX X4 to see if the noise volume changes accordingly.
  • 'POP' click sound during power-on: This is normal if the amplifier/powered speakers are turned on before the BOX X4. Always power on the BOX X4 first. This sound will not damage your equipment.

7.2 Frequently Asked Questions (FAQ)

  • Q: Can the BOX X4 be used with an MC (Moving Coil) cartridge?
    A: No, the BOX X4 is designed specifically for MM (Moving Magnet) cartridges.
  • Q: Does the BOX X4 have Bluetooth connectivity?
    A: No, the Fosi Audio BOX X4 does not feature Bluetooth connectivity.
  • Q: Can I connect the BOX X4 directly to passive speakers?
    A: No, the BOX X4 is a preamplifier, not a power amplifier. It cannot directly drive passive speakers. You need a separate power amplifier or active (powered) speakers.
  • Q: Is the power adapter compatible with 220V outlets?
    A: Yes, the product adapter input voltage range is AC 100V - 240V, making it compatible with 220V outlets. Regional plugs are provided.
  • Q: Which vacuum tubes can be used to replace the default ones?
    A: Compatible tubes include EF95, 6J1, 6J4, GE5654, 6AK5, 66*In, 612, 613, 434, 625 vacuum tubes.
  • Q: What equalization is incorporated in this preamp?
    A: The BOX X4 incorporates RIAA equalization.

8. Specifications

Feature Specification
ModelBOX X4
Brand NameFosi Audio
TypeTube Preamp Amplifier (Desktop Audio Preamp, MM Phono Stage Amplifier)
MaterialMetal
Channels2 (2.0)
Control MethodPush button
Power Adapter Output12V with UL PSE Level 6 energy efficiency
Product Adapter Input Voltage RangeAC 100V - 240V
Output Voltage Level1kHz and 650mV
SNR≥ 70dB
THD≤ 0.1%
Frequency ResponseStandard RIAA
Input ModeMM turntable input + 3.5mm AUX
Output ModeRCA output + 3.5mm headphone output
Applicable Headphone Types16 Ω - 300 Ω
Product Weight0.71 lb / 320g
Product Dimensions3.97 x 4.72 x 1.37 inch (10.09 x 12 x 3.5 cm)
OriginMainland China
CertificationCE

9. User Tips

  • Many users report a full sound with strong bass presence, which can reduce the need for extensive equalizer adjustments on your main amplifier.
  • The BOX X4 is noted for effectively reducing vinyl noise, contributing to a cleaner audio experience.
  • Its compact design and versatile connectivity make it a good fit for various audio setups.
  • The tube design not only enhances sound quality but also adds an aesthetic appeal to your audio station.

10. Warranty & Support

10.1 Warranty Information

All Fosi Audio products come with an 18-month limited warranty covering parts and labor from the date of purchase. Please contact Fosi Audio support if you encounter any issues.

10.2 About Fosi Audio

Fosi Audio designs and builds innovative audio products focused on great sound, elegant designs, high-quality materials, and useful features.

10.3 Technical Support

For any problems or inquiries, please contact Fosi Audio technical support:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.