ANRAN 8CH Wireless NVR User Manual

Important Remarks

Please read the following compatibility notes carefully before setting up your ANRAN Wireless NVR system:

• ANRAN cameras using a 5V power supply are NOT compatible with this NVR.
• This NVR is designed to add cameras that use the "ARCCTV" APP. It CANNOT add cameras that use the "ANRAN" APP. Please ensure your cameras are compatible with the "ARCCTV" APP for proper functionality.

Figure 1: NVR Compatibility with ARCCTV App Cameras

Product Overview

The ANRAN 8CH Wireless NVR (Network Video Recorder) is a core component of your wireless surveillance security camera system. It allows you to record, store, and manage video footage from compatible ANRAN Wi-Fi cameras, providing a comprehensive solution for home or business security monitoring.

Figure 2: ANRAN 8CH Wireless NVR

Package Contents

Please verify that all items listed below are included in your package:

• 1 x Wireless NVR (Network Video Recorder)
• 1 x Power Supply for NVR
• 4 x Bullet Cameras (Quantity may vary based on purchased kit)
• 4 x Power Supply for Camera (Quantity may vary based on purchased kit)
• 1 x USB Mouse (gift)
• 1 x Warning Sticker (gift)
• 4 x Pack Screws (for camera mounting)
• 1 x 1M Ethernet Cable (gift)
• 1 x Quick Guide
• Hard Drive (if chosen, pre-installed in NVR)

Figure 3: Package Contents

Specifications

Figure 4: NVR Dimensions

Setup

Power Specifications

The NVR and cameras require specific power adapters. By default, the appropriate power supply for your region will be included. If you require a different specification, please ensure to note this when ordering.

Figure 5: Power Plug Types by Region

Connection Modes

Your ANRAN Wireless NVR system supports two primary connection modes:

• Wireless Connection: The NVR and cameras connect to your router via Wi-Fi. No RJ45 network cable is required between the NVR and the router for this mode (supported only by NVR model K8508).
• Wired Connection: For a more stable signal, the NVR can be connected to your router using an RJ45 network cable. The connection between the NVR and the cameras remains wireless (via Wi-Fi).

Figure 6: Wireless and Wired Connection Modes

NVR WiFi Signal Range

The effective Wi-Fi range of the NVR is influenced by its surrounding environment:

• In a completely open area, the NVR can maintain a connection with cameras up to 50 meters away.
• If there are solid walls or other obstructions, the effective range will be reduced to approximately 10-20 meters. Plan your camera placement accordingly to ensure optimal signal strength.

Figure 7: NVR WiFi Signal Range

Initial Setup (Plug and Play)

The ANRAN NVR system is designed for easy plug-and-play setup. Follow these steps to get your system operational:

1. Power the Cameras: Connect each camera to its individual power adapter and plug them into a power outlet.
2. Connect NVR to Monitor: Connect the NVR to a monitor or TV using either the HDMI-Compatible port or the VGA port.
3. Power the NVR: Connect the NVR to its power supply and plug it into a power outlet.
4. Connect USB Mouse: Plug the included USB mouse into one of the NVR's USB ports.
5. System Initialization: The NVR will power on and begin initializing. Once complete, the live view from your cameras should appear on the connected monitor.

Figure 8: NVR Rear Ports

For a visual guide, refer to the "Plug and Play" section of Video 1 (starting at 0:32).

Operating Instructions

Remote Access

Access your surveillance system remotely from your smartphone or tablet using the ARCCTV app. This allows you to view live feeds, playback recorded footage, and receive alerts from anywhere with an internet connection.

To set up remote access:

1. Download the "ARCCTV" app from your device's app store (available for iPhone OS and Android).
2. Follow the in-app instructions to add your NVR device. This typically involves scanning a QR code on the NVR or entering its device ID.
3. Once added, you can view live camera feeds and access recorded video.

See the "Remote Access" demonstration in Video 1 (starting at 1:43).

Motion Detection

The system supports motion detection, which can trigger recording and send alerts to your mobile device. This feature helps you stay informed of any activity in monitored areas without constant manual checking.

To configure motion detection:

1. Access the NVR's menu via the connected monitor and mouse.
2. Navigate to the alarm or motion detection settings.
3. Enable motion detection for desired cameras and configure sensitivity levels and recording schedules.
4. Ensure push notifications are enabled in the ARCCTV app settings on your mobile device to receive alerts.

See the "Motion Detected" demonstration in Video 1 (starting at 1:47).

Multi-Language Support

The NVR system interface supports multiple languages, allowing users to operate the system in their preferred language. Supported languages include English, Korean, German, Italian, Japanese, Spanish, Portuguese, Russian, French, and Hebrew.

Figure 9: Multi-Language Selection

Maintenance

Regular maintenance ensures the longevity and optimal performance of your ANRAN NVR system:

• Cleanliness: Keep the NVR unit and cameras free from dust and debris. Use a soft, dry cloth for cleaning.
• Ventilation: Ensure the NVR has adequate ventilation to prevent overheating. Do not block air vents.
• Firmware Updates: Periodically check for and install firmware updates for your NVR and cameras. Updates often include performance improvements, bug fixes, and security enhancements.
• Hard Drive Health: If your NVR has a built-in hard drive, monitor its health through the NVR's system settings. Consider replacing it if errors or warnings appear.
• Cable Connections: Regularly check all cable connections (power, HDMI/VGA, Ethernet) to ensure they are secure.

Troubleshooting

Here are some common issues and their potential solutions:

• No Video Output on Monitor:
  • Ensure the NVR is powered on and the power adapter is securely connected.
  • Check the HDMI-Compatible or VGA cable connection between the NVR and the monitor.
  • Verify the monitor input source is correctly selected (e.g., HDMI1, VGA).
• Cameras Not Connecting to NVR:
  • Confirm cameras are powered on and within the NVR's Wi-Fi range (refer to "NVR WiFi Signal Range" section).
  • Ensure cameras are compatible with the "ARCCTV" APP and not the "ANRAN" APP (refer to "Important Remarks" section).
  • If cameras were previously paired, try re-pairing them through the NVR's menu.
• No Recording/Hard Drive Issues:
  • Verify that a hard drive is installed and properly connected (SATA 2.5'' HDD).
  • Check the hard drive status in the NVR's system settings. It may need to be formatted or initialized.
  • Ensure recording schedules are correctly configured.
• Remote Access Not Working:
  • Ensure the NVR is connected to the internet (either wirelessly or via Ethernet cable).
  • Verify your mobile device has an active internet connection.
  • Check that the ARCCTV app is updated to the latest version.
  • Confirm the NVR is correctly added to your ARCCTV account.
• System Slow or Unresponsive:
  • Restart the NVR.
  • Ensure adequate ventilation to prevent overheating.
  • Check for available firmware updates.

User Tips

• Hard Drive Installation: If your NVR did not come with a pre-installed hard drive, you will need to install a 2.5'' SATA hard drive for recording. Ensure it is properly seated and formatted via the NVR's system settings.
• Camera Quantity: This NVR supports up to 8 channels. If you have more than 8 cameras, you will need an NVR with higher channel capacity.
• Optimal Placement: For best wireless performance, place the NVR in a central location, avoiding major obstructions like thick walls or large metal objects between the NVR and cameras.
• Regular Backups: Periodically back up important footage from the NVR to an external USB drive or network storage.

Warranty & Support

ANRAN offers a 1-year warranty on all products, effective from the date of receipt. This warranty covers defects in the product itself and allows for repair or replacement. It does not cover incidental, accidental, or indirect losses, nor losses caused by natural disasters.

Warranty service is provided under the following conditions:

• Within 1 month of receipt: Free replacement of the product.
• 2-6 months after receipt: Buyer pays shipping fees for warranty service.
• 7-12 months after receipt: Buyer pays 50% of the product price for warranty service.

For technical support or warranty claims, please contact ANRAN customer service directly. Provide your product model, purchase date, and a detailed description of the issue to expedite assistance.

Figure 10: Customer Satisfaction Overview