1. Product Overview
This document provides instructions for the Flytec 2011-5 RC Fishing Bait Boat Remote Control, model 2011-5.012. This remote control is designed as a replacement or spare part specifically for the original Flytec 2011-5 RC Fishing Bait Boat model. It is crucial to note that this remote control is only compatible with the original Flytec 2011-5 boat circuit board. Attempting to pair it with other circuit boards may result in malfunction.
Figure 1: Front view of the Flytec 2011-5 Remote Control
Figure 2: Remote Control and Compatible Boat Circuit Board
The compatible boat circuit board features connectors for Front Light, Left Rear Light, Right Rear Light, Servo, Switch, Battery, Right Motor, Left Motor, and a Battery Indicator, as shown in Figure 3.
Figure 3: Flytec 2011-5 Boat Circuit Board Diagram
2. Setup and Installation
2.1 Battery Installation
The remote control requires batteries (not included). To install:
- Locate the battery compartment on the back of the remote control.
- Slide open the battery compartment cover.
- Insert the required number of AA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Figure 4: Battery Compartment
2.2 Frequency Matching Method
This procedure is necessary if the remote control does not respond to the boat or if either the boat's circuit board or the controller's circuit board has been replaced. Follow these steps to pair the remote control with the boat circuit board:
- Long press the frequency button (labeled ① in Figure 5) on the remote control and do not release it.
- While still holding the frequency button, turn on the boat's power switch.
- Then, turn on the remote controller's power switch key (labeled ② in Figure 5).
- When you hear a long "beep" sound, the controller and the boat are successfully matched. This operation must be completed within 3 seconds.
Figure 5: Frequency Matching Diagram
Video 1: Demonstration of Frequency Matching Process
3. Operating Instructions
Once the remote control is successfully paired with your Flytec 2011-5 bait boat, you can operate the boat using the joysticks and buttons on the controller.
- Left Joystick: Typically controls the left motor's speed and direction (forward/reverse).
- Right Joystick: Typically controls the right motor's speed and direction (forward/reverse).
- Trim Buttons: Used to fine-tune the boat's straight-line movement if it veers to one side.
- Bait Release Buttons: Specific buttons on the controller are used to open the bait hoppers on the boat.
- Light Control: Buttons may be present to control the boat's navigation lights (Front Light, Left Rear Light, Right Rear Light).
Refer to your Flytec 2011-5 bait boat's main manual for detailed control functions and specific button assignments.
4. Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Avoid using harsh chemicals or solvents.
- Storage: Store the remote control in a dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.
- Water Exposure: This remote control is not waterproof. Avoid exposing it to water or high humidity.
- Battery Replacement: Replace batteries promptly when the indicator light shows low power or if the control range decreases.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control does not respond to the boat. | Not paired, low batteries, or incompatible circuit board. |
|
| Short control range. | Low batteries in remote or boat, or environmental interference. |
|
| Boat moves erratically or not straight. | Trim settings incorrect. | Adjust the trim buttons on the remote control to correct the boat's direction. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Flytec |
| Model Number | 2011-5.012 |
| Material | Composite Material |
| Quantity | 1 pcs |
| For Vehicle Type | Boats (RC Fishing Bait Boat) |
| Tool Supplies | Assembled class |
| Remote Control Peripherals/Devices | Remote Controller, Transmitters |
| Origin | Mainland China |
| Recommend Age | 14+y |
| Use | Vehicles & Remote Control Toys |
| Certification | CE |
| Is Electric | No Battery |
| Is Batteries Included | No |
| High-concerned chemical | None |
| Package Weight | 0.3 kg |
| Package Dimensions (L x W x H) | 20 cm x 21 cm x 8 cm |
Figure 6: Side view of the Remote Control
7. User Tips
- Compatibility Check: Always verify that this remote control (Model 2011-5.012) is specifically designed for your Flytec 2011-5 bait boat model to ensure proper function.
- Battery Quality: Use high-quality AA batteries for optimal performance and longer operating times.
- Matching Environment: When performing frequency matching, ensure there are no other active RC devices nearby that could cause interference.
- Range Expectations: This is a replacement controller for the Flytec 2011-5 boat. The operational range is determined by the boat's receiver and antenna system, not solely by the controller.
8. Warranty and Support
For product support, technical assistance, or warranty claims, please contact the Flytec Official Store or your original point of purchase. Keep your purchase receipt as proof of purchase.
- Returns: Free returns may be available within 90 days of purchase. Please check the seller's return policy for details.
- Product Issues: In cases of product damage or loss, or if the item is not as described, refund options may be available.
Flytec is committed to providing secure transactions and protecting your personal details. Your privacy is important and details are not shared with third parties without consent.
