GL.iNet AR300M16

Contents

GL.iNet AR300M16 (Shadow) Mini Smart Router User Manual

Model: GL-AR300M16 (Shadow)

Brand: GL.iNet

Introduction

The GL.iNet AR300M16 (Shadow) is a portable mini smart router designed for travel and on-the-go use. It offers a compact and flexible solution for creating secure Wi-Fi networks from various internet sources. This router comes with OpenWrt pre-installed, providing extensive customization and advanced networking capabilities, including VPN client and server functionalities for both OpenVPN and WireGuard.

The GL-AR300M16 is available in two variants: GL-AR300M16 (without external antenna) and GL-AR300M16-EXT (with external antennas).

1. Getting Started

1.1. Power On

To power on your GL.iNet AR300M16 router, plug the Micro USB power cable into the power port. Ensure you use a standard 5V/1A power adapter to prevent malfunction.

GL.iNet AR300M16 router with labeled ports (WAN, LAN, Power, USB)
Figure 1: GL.iNet AR300M16 Router with labeled ports (WAN, LAN, Power, USB). The power port is a Micro USB port.

1.2. Connect

You can connect to the router via an Ethernet cable or Wi-Fi. Note that this step only connects your devices to the router's Local Area Network (LAN); it does not provide internet access yet. Internet setup procedures are detailed in Section 2.

1.2.1. Connect via LAN

Connect your device (e.g., computer) to the LAN port of the router using an Ethernet cable.

GL.iNet AR300M16 router with an Ethernet cable connected to the LAN port
Figure 2: Connecting a device to the router via Ethernet cable to the LAN port.

1.2.2. Connect via Wi-Fi

Search for the router's SSID (Wi-Fi network name) on your device and enter the default password: goodlife. The SSID is typically printed on the bottom label of the router and follows formats like GL-AR300M-XXX.

1.3. Access the Web Admin Panel

Open a web browser (Chrome or Firefox recommended) and navigate to http://192.168.8.1. This will direct you to the initial setup of the web Admin Panel.

1.3.1. Language Setting

Choose your preferred display language for the Admin Panel. Supported languages include English, Simplified Chinese, Traditional Chinese, Deutsch, Français, Español, and Japanese.

Screenshot of the GL.iNet Admin Panel language selection screen
Figure 3: Admin Panel language selection. Select your language and click 'Next'.

1.3.2. Admin Password Setting

Set a new password for the Admin Panel. The password must be at least 5 characters long. This password is for the web Admin Panel and the embedded Linux system; it will not change your Wi-Fi password.

Screenshot of the GL.iNet Admin Panel password setting screen
Figure 4: Admin Panel password setting. Enter and confirm your new password.

1.3.3. Admin Panel Overview

After the initial setup, you will enter the web Admin Panel, which allows you to check the router's status and manage its settings.

2. Internet Connection Methods

The GL.iNet AR300M16 supports four primary methods to connect to the internet: Cable, Repeater, 3G/4G Modem, and Tethering.

Diagram illustrating four methods to access the internet: Cable, Repeater, USB Modem, and Tethering
Figure 5: Internet access methods: 1. Cable, 2. Repeater, 3. USB Modem, 4. Tethering.

2.1. Cable Connection

Connect the router to a modem or main router via an Ethernet cable plugged into the WAN port. You can also configure the WAN port to act as an additional LAN port if needed, especially when using the router as a repeater.

  • DHCP: The default and most common protocol, requiring no manual configuration.
  • Static: Used when your Internet Service Provider (ISP) provides a fixed IP address, or if you wish to manually configure network information.
  • PPPoE: Required by some ISPs. Enter the username and password provided by your ISP.

2.2. Repeater Mode

In Repeater mode, the router connects to an existing wireless network (e.g., hotel Wi-Fi) and creates its own subnet, acting as a firewall to protect your devices from public networks. In the Admin Panel, navigate to the Repeater section, click 'Scan' to find available networks, select an SSID, enter its password, and click 'Join'.

2.3. USB 3G/4G Modem

To use a USB 3G/4G modem, insert your SIM card into the modem, then plug the modem into the router's USB port. Once detected, configure the modem using parameters such as Device (e.g., /dev/ttyUSB0), Service Type, and APN (consult your SIM card carrier). Some modems may work better with Tethering mode.

2.4. Tethering

Tethering allows you to share your smartphone's network connection with the router via a USB cable. This is also used for host-less modems.

iPhone Tethering

  1. Connect your iPhone to the router's USB port.
  2. On your iPhone, go to Settings > Personal Hotspot > Allow Others to Join, and switch Personal Hotspot ON.
  3. If prompted, click 'Trust' on your iPhone to allow the computer (router) to access your settings and data.
Screenshot of an iPhone's Personal Hotspot settings, showing the toggle switched on
Figure 6: iPhone Personal Hotspot enabled.
Screenshot of an iPhone's 'Trust This Computer?' prompt during tethering setup
Figure 7: iPhone 'Trust This Computer?' prompt.

Android Tethering

  1. Connect your Android phone to the router's USB port.
  2. On your Android phone, go to Settings > Personal hotspot > USB network sharing, and enable it.
  3. In the router's Admin Panel, the Tethering section will update, showing your device (e.g., eth2, usb0). Select your device and click 'Connect'.

3. Advanced Network Features

3.1. Wireless Settings

In the WIRELESS section of the Admin Panel, you can view and modify settings for the router's wireless network, including:

  • Wi-Fi Name (SSID): The name of your Wi-Fi network. Avoid using Unicode characters.
  • Wi-Fi Security: The encryption method for your Wi-Fi.
  • Wi-Fi Key: The Wi-Fi password (minimum 6 characters). It is recommended to change the default password.
  • Hide SSID: Option to show or hide your network's SSID.
  • Channel: Manually select a Wi-Fi channel. If used as a repeater, the channel is fixed by the connected network.
  • Speed: The wireless speed of the router.
  • TX Power (dBm): Adjusts the signal strength (default is 20 dBm for strongest signal).

3.2. VPN (Virtual Private Network)

GL.iNet routers come with pre-installed OpenVPN and WireGuard client and server functionalities.

  • OpenVPN Client: Upload an OpenVPN configuration file (.ovpn) to connect to a VPN server.
  • OpenVPN Server: Set up your router as an OpenVPN server and generate configuration files for clients.
  • WireGuard Client: Add new WireGuard profiles by copying JSON or plain text configurations from your VPN server.
  • WireGuard Server: Create a WireGuard server on your router and add new clients.
  • VPN Policies: Define routing policies to use VPN for specific websites/IPs or exclude certain traffic from VPN.

3.3. File Sharing

You can connect external storage devices (USB stick, MicroSD card) to the router to share content with connected clients. By default, shared content is read-only and accessible via LAN, not WAN.

Accessing Storage Devices

  • Windows: Access via \\192.168.8.1\ or smb://192.168.8.1/ in File Explorer. For Windows 10, ensure SMB 1.0 support is enabled in 'Turn Windows features on or off'.
  • Mac OS: Use 'Connect to Server' in Finder (smb://192.168.8.1) and log in with your Admin Panel credentials.
  • iOS/Android: Use file manager apps (e.g., FE File Explorer on iOS, ES File Explorer on Android) to connect to the router's network storage.

3.4. DLNA Server

The router supports DLNA Server functionality, but it requires installing specific plug-ins: luci-app-minidlna and miniDLNA. After installation, you can find the OpenWrt DLNA Server on your devices (e.g., Windows Media Player, VLC, UPNP Extreme).

3.5. Dynamic DNS (DDNS)

DDNS maps a domain name to the router's dynamic IP address, allowing remote access. This feature requires firmware v3.010 or higher.

  • Setup: Enable DDNS in the Admin Panel under APPLICATIONS > Remote Access.
  • Remote Access: Enable HTTP, HTTPS, or SSH remote access. HTTP is unencrypted and used at your own risk.

3.6. Cloud Management (GoodCloud)

GL.iNet GoodCloud provides a service for remote access and management of your routers. It allows you to check live status, monitor clients, and perform batch operations.

3.7. Tor

Tor firmware is available for anonymous communication. It is built-in from firmware V3.100. If you use Tor firmware, you may need to move the hardware switch to the right side to access the UI, otherwise you will be connected to the Tor network directly.

4. Maintenance and Firmware

4.1. Firmware Upgrade

Keeping your router's firmware updated ensures optimal performance and security.

  • Online Upgrade: If your router is connected to the internet, the Admin Panel can check for and download newer firmware versions automatically.
  • Upload Firmware (Local Upgrade): Download firmware files from the GL.iNet website (e.g., https://dl.gl-inet.com/firmware/ar300m/) and upload them via the Admin Panel. It is recommended to uncheck 'Keep settings' during an upgrade to avoid issues; if problems occur, reset the router.
  • Auto Upgrade: Enable auto-upgrade in the Admin Panel to automatically search for and install updates at a set time.

4.2. Reset and Repair

The router features a multi-function reset button for network repair or factory reset.

4.2.1. Repair or Reset Button

Diagram of the GL.iNet Mini Router's reset button functions: 3-second press for network repair, 10-second press for factory reset
Figure 8: Reset button functions. Press and hold for 3 seconds to repair network, 10 seconds for factory reset.
  • Short Press (1 second): When the middle LED flashes once, release to change the Tor Exit node (if Tor firmware is used).
  • Press and Hold (3 seconds): When the middle LED flashes quicker (twice per second), release to reset network settings (disables repeater, sets LAN IP to 192.168.8.1, enables DHCP). Use this if your repeater cannot connect.
  • Press and Hold (10 seconds): When the middle LED flashes even quicker (4 times per second), release to restore factory settings. All user data will be cleared.

4.2.2. Debrick via Uboot

If your router becomes unresponsive (bricked) due to incorrect firmware flashing, you can use the Uboot Web UI to re-install firmware. This involves connecting your computer to the router's Ethernet port, setting your computer's IP to 192.168.1.2, and accessing http://192.168.1.1 in a browser while holding the reset button during power-on.

5. Troubleshooting

5.1. LED Indicators

  • Power LED: Solid green indicates the router is powered on.
  • Wireless LED: Solid red indicates Wi-Fi is broadcasting; flashes when there is wireless data transfer.
  • Configurable LED: Can be customized by the user.

LED customization can be accessed via the Advanced settings in the Admin Panel (Luci interface).

5.2. Common Connection Issues

  • Check IP Address: Ensure your WAN/LAN port connections are correct and the Wi-Fi SSID is correct. If your IP address is incorrect, try a factory reset or debrick via Uboot. If correct, try accessing the Admin Panel in an incognito browser window to bypass cache issues.

5.3. Captive Portal Issues

When connecting to public Wi-Fi with a captive portal, you might need to disable DNS Rebinding Attack Protection in the Admin Panel (MORE SETTINGS > Custom DNS Server) to ensure the portal page loads correctly.

5.4. GoodCloud Issues

  • If your device shows 'Deactivated' in GoodCloud, ensure the router is connected to the internet, then disable and re-enable GoodCloud in the router's Admin Panel, clicking 'Apply'. Also, verify the correct region is selected in GoodCloud.

6. Technical Specifications

FeatureSpecification
Brand NameGL.iNet
ModelAR300M16 (Shadow)
CPUQCA9531, @650Mhz SoC
Memory / Storage128MB RAM / 16MB NOR Flash
2.4G Wi-Fi Transmission Rate300 Mbps
Wi-Fi Supported Frequency2.4G
Standards And ProtocolsWi-Fi 802.11g, Wi-Fi 802.11b, Wi-Fi 802.11n
Max. LAN Data Rate300Mbps
WAN Ports1 x 10/100Mbps
LAN Ports1 x 10/100Mbps
USB Ports1 x USB 2.0
Antenna TypeRetractable (for EXT model)
FunctionFirewall, QoS, VPN
Supports WPSNo
Supports WDSYes
Support MeshNot Supported
OpenWrt Pre-installedYes
VPN Pre-installedYes
Power Consumption2W
Operating Temperature0 ~ 40°C (32 ~ 104°F)
Storage Temperature-20 ~ 70°C (-4 ~ 158°F)
Dimension58 x 58 x 25mm
Weight39g
CertificationCE, FCC, RoHS, WEEE
Comparison table of GL.iNet router models
Figure 9: Router Comparison Table, including GL-AR300M16 specifications.

7. User Tips

  • External Storage for OpenWrt: The router's 16MB NOR Flash is somewhat limited for extensive OpenWrt functions. For more advanced features or larger installations, it is highly recommended to add external storage via the USB port (e.g., a USB drive).
  • SMB/SAMBA Functionality: The GL.iNet AR300M16 supports SMB/SAMBA, allowing for network file sharing.
  • WAN as Second LAN: The WAN port can be reconfigured to function as a second LAN port, providing additional wired connectivity.
  • Power Supply: The router is powered via MicroUSB (5V). A MicroUSB cable is included, and it can be powered from any standard USB source (e.g., laptop USB port, power bank, or 5V/1A DC adapter).
  • VPN Client and Server: The router supports both VPN client and VPN server modes, offering flexibility for secure network access.
  • Public Wi-Fi with Access Portal: The router can connect to public Wi-Fi networks that use access portals. If you encounter issues, disabling DNS Rebinding Attack Protection in the Admin Panel may help.
  • Ethernet Speed: Note that the Ethernet ports are 10/100Mbps, not 1Gbps.

8. Warranty and Support

The GL.iNet AR300M16 (Shadow) Mini Smart Router comes with a 2-year warranty.

For detailed instructions and further assistance, you can refer to the official user manual PDF available at: GL.iNet AR300M16 User Manual (PDF).

Additional support and resources, including firmware downloads and community forums, can be found on the official GL.iNet website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.