KKMOON KKM100-ENG

Contents

KKMOON KKM100-ENG Intelligent Multimeter Pen User Manual

Model: KKM100-ENG | Brand: KKMOON

1. Introduction

The KKMOON KKM100-ENG is a pen-type intelligent multimeter designed for convenient and versatile electrical measurements. It features a large display screen and multiple functions, including direct current and AC voltage measurement, resistance, capacitance, temperature, diode, and continuity buzzer tests. This model also includes a voice broadcast function, a flashlight, backlight, and phase sequence measurement, making it an ideal tool for laboratories, factories, radio enthusiasts, and general household use.

KKMOON KKM100-ENG Multimeter Pen with packaging and display details
Figure 1: KKMOON KKM100-ENG Multimeter Pen and accessories.

2. Key Features

  • Compact and Portable: Pen-type design for easy carrying and use.
  • Large Display: High-definition color screen for clear readings.
  • Automatic Identification: Intelligently identifies measurement type for ease of use.
  • Voice Broadcast Function: Provides audible readings and function announcements (KKM100-ENG only).
  • Wide Measurement Range:
    • DC Voltage: 0.8V to 1000V
    • AC Voltage: 0.8V to 700V
    • Resistance: 0.1Ω to 60MΩ
    • Capacitance: 10nF to 60mF
    • Temperature: -20℃ to 50℃ (0℉ to 122℉)
    • Diode Test: Up to 3.0V
    • Continuity Buzzer: 0.1Ω to 50Ω
  • Non-Contact Voltage (NCV) Detection: Safely detects AC voltage without direct contact.
  • Live/Null Wire Test: Identifies live and null wires.
  • Breakpoint Lookup (Fire Distinguish Function): Detects breaks in circuits with sound/light alarm.
  • Phase Sequence Measurement: Determines the phase sequence of three-phase power (KKM100 and KKM100-ENG only).
  • Flashlight & Backlight: For use in dimly lit environments.
  • Data Hold: Freezes the current reading on the display.
  • True RMS: Provides accurate measurements for non-sinusoidal waveforms.
  • Automatic Power Off: Conserves battery life by automatically shutting down after 5 minutes of inactivity.
Diagram showing the full function list of the KKM100-ENG multimeter
Figure 2: Overview of KKM100-ENG functions.

3. Technical Specifications

FeatureKKM99KKM100KKM100-ENG
Display TypePositive display screenColor screenColor screen
Phase SequenceNoYesYes
Voice BroadcastNoNoYes
DC Voltage0.8-1000V0.8-1000V0.8-1000V
AC Voltage0.8-700V0.8-700V0.8-700V
Resistance0.1-60MΩ0.1-60MΩ0.1-60MΩ
Capacitance10nF-60mF10nF-60mF10nF-60mF
Temperature-20℃~50℃ (0℉~122℉)-20℃~50℃ (0℉~122℉)-20℃~50℃ (0℉~122℉)
Diode3.0V3.0V3.0V
Buzzer0.1-50Ω0.1-50Ω0.1-50Ω
Fire DistinguishYesYesYes
FlashlightYesYesYes
True RMSYesYesYes
Power Supply1 * AAA battery1 * AAA battery1 * AAA battery
Automatic ShutdownYesYesYes
BacklightYesYesYes
Data KeepingYesYesYes
Size171*21*21mm171*21*21mm171*21*21mm
Net Weight80g80g80g
Table of specifications for KKM99, KKM100, and KKM100-ENG models
Figure 3: Detailed specification comparison across models.

4. Product Components

Diagram of the KKM100-ENG Multimeter Pen with labeled parts including NCV sensor, LED flashlight, display, and buttons
Figure 4: Front view of the Multimeter Pen with labeled components.
  • NCV Sensor Probe/Multimeter Stylus: Used for non-contact voltage detection and as a test probe.
  • Pen Cap: Protects the probe tip when not in use.
  • LED Flashlight: Illuminates the work area.
  • Sound and Light Alarm: Provides audible and visual alerts during measurements.
  • Large HD Color Screen: Displays measurement readings and function indicators.
  • Live and Null Wire/Voltage Test Pen/Flashlight Button: Activates live/null wire test and flashlight.
  • HOLD Button: Freezes the current display reading.
  • Select Button: Cycles through different measurement functions.
  • Power/Function Selection Key: Turns the device on/off and selects functions.
  • Clip: For attaching the pen to a pocket or belt.
  • Pens and Hole: Connection point for external test leads.
Diagram of the KKM100-ENG Multimeter Pen showing the battery compartment
Figure 5: Rear view showing the battery compartment.
  • Battery Compartments: Houses the AAA battery.
  • Cover: Secures the battery compartment.

5. Setup and Battery Installation

  1. Unpack: Carefully remove the multimeter pen and any accessories from the packaging.
  2. Battery Installation:
    1. Locate the battery compartment cover on the rear of the device (refer to Figure 5).
    2. Remove the cover.
    3. Insert one AAA battery, ensuring correct polarity (+/-).
    4. Replace the battery compartment cover securely.
  3. Power On: Press and hold the Power/Function Selection Key to turn on the device. The display will light up.

6. Operating Instructions

The KKM100-ENG features intelligent automatic identification, simplifying most measurements. For specific functions, use the 'Select' button.

Video 1: Demonstration of various measurement functions and voice broadcast.

6.1 Automatic Identification and Measurement

When powered on, the multimeter automatically enters intelligent measurement mode. Simply connect the test leads to the circuit or component, and the device will automatically identify and measure AC/DC voltage, resistance, or continuity. The KKM100-ENG model will also provide a voice broadcast of the measurement.

  • AC Voltage Measurement: Insert the test leads into the AC power source. The display will show the AC voltage (e.g., 232.7V as seen in Video 1 at 0:23).
  • DC Voltage Measurement: Connect the test leads to a DC source like a battery. The display will show the DC voltage (e.g., 9.76V for a 9V battery, 1.567V for a 1.5V battery as seen in Video 1 at 0:26-0:29).
  • Resistance Measurement: Connect the test leads across the resistor. The display will show the resistance value (e.g., 216.2Ω as seen in Video 1 at 0:30).
  • Capacitance Measurement: Connect the test leads across the capacitor. The display will show the capacitance value (e.g., 3.71μF as seen in Video 1 at 0:37).

6.2 Function Selection

Press the 'Select' button to cycle through different manual measurement functions if automatic identification is not desired or for specific tests.

6.3 Continuity Buzzer

In continuity mode, if the resistance between the two probes is below approximately 50Ω, the buzzer will sound, indicating a continuous circuit (as seen in Video 1 at 0:32-0:35).

6.4 Non-Contact Voltage (NCV) Detection

Hold the NCV sensor probe near an AC voltage source. The device will indicate the presence of AC voltage without direct contact, often with a sound and light alarm.

Image showing the NCV voltage test pen in use, detecting AC voltage from an outlet
Figure 6: NCV voltage test pen in use.

6.5 Live/Null Wire Test

Use the probe to test individual wires. The device will indicate whether a wire is live or null, often with visual and audible cues.

6.6 Breakpoint Lookup (Fire Distinguish Function)

This function helps detect breaks in electrical circuits. When the probe is near a live wire with a break, the device will indicate the breakpoint with a sound/light alarm.

Image demonstrating breakpoint lookup with sound and light alarm
Figure 7: Breakpoint lookup in action.

6.7 Phase Sequence Measurement (KKM100/KKM100-ENG only)

This function is used to determine the phase sequence (positive, reverse, or open phase) in three-phase power systems. Touch the probe to each phase sequentially. The display will show 'PA', 'PAB', 'PABC' and indicate the sequence (as seen in Video 1 at 1:29-1:39).

Image showing the phase-sequence meter in use on a circuit breaker
Figure 8: Phase sequence measurement.

6.8 Flashlight

Press the dedicated flashlight button (often integrated with the Live/Null Wire button) to turn the LED flashlight on or off. This is useful for working in dark areas (as seen in Video 1 at 1:25-1:28).

6.9 Data Hold

Press the 'HOLD' button to freeze the current reading on the display. Press it again to release the hold function.

7. Troubleshooting

  • No Display/Power On: Check if the AAA battery is inserted correctly and has sufficient charge. Replace the battery if necessary.
  • Inaccurate Readings: Ensure test leads are properly connected and making good contact with the circuit/component. Verify the correct function is selected if not using auto-identification.
  • No Voice Broadcast (KKM100-ENG): Check if the voice broadcast feature is enabled (if applicable, refer to the device's specific settings). Ensure the volume is not muted.
  • Slow Response: Low battery can sometimes cause slow response times. Replace the battery.
  • Device Not Responding: Try turning the device off and on again. If the issue persists, remove the battery for a few minutes and reinsert it.

8. Care and Maintenance

  • Cleaning: Wipe the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
  • Storage: Store the multimeter in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the battery to prevent leakage.
  • Battery Replacement: Replace the AAA battery when the low battery indicator appears on the display to ensure accurate measurements and proper operation.
  • Avoid Drops: While durable, avoid dropping the device to prevent damage to internal components or the display.

9. User Tips

  • The phase sequence detection feature is highly valued by users for its utility in electrical work.
  • Always ensure the test leads are securely connected before taking measurements.
  • For the KKM100-ENG model, pay attention to the voice broadcast for quick and hands-free confirmation of readings.

10. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact KKMOON customer service directly. Keep your purchase receipt as proof of purchase.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.