1. Introduction
This manual provides instructions for the operation and maintenance of your new zap brand remote control, designed as a replacement or secondary remote for various Pioneer AV Receiver Home Theater systems. This remote control is compatible with a wide range of Pioneer VSX series models, ensuring seamless integration with your existing audio-visual setup.
Please ensure your original remote control matches the appearance of the remote shown in this manual for guaranteed compatibility.
2. Compatible Models
This remote control is compatible with the following Pioneer AV Receiver Home Theater models:
- VSX-516
- VSX-918V
- VSX-829H
- VSX-519V
- VSX-520K
- VSX-919AH
- VSX-417
- VSX-1019
- VSX-515
- VSX-520
- VSX-422
- VSX-817
- VSX-420
- AXD7534 (Original Remote Model)
- AXD7568 (Original Remote Model)
If your model is not listed, please compare your original remote with the images provided to confirm compatibility.
3. Setup
3.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or press the latch and lift to open.
- Insert two (2) AAA batteries (not included) into the compartment, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
The remote control is pre-programmed and ready to use with compatible Pioneer AV Receivers once batteries are installed. No additional programming is required.
4. Operating Instructions
Point the remote control directly at your Pioneer AV Receiver. Ensure there are no obstructions between the remote and the receiver's IR sensor.
4.1 Basic Functions
- POWER ON/OFF: Press the RECEIVER button to turn the AV Receiver on or off.
- INPUT SELECT: Use the INPUT SELECT buttons (e.g., CD, TV, DVR, TUNER) to switch between different audio/video sources.
- VOLUME CONTROL: Press VOLUME + to increase volume and VOLUME - to decrease volume.
- MUTE: Press the MUTE button to temporarily silence the audio. Press again to restore sound.
- MENU NAVIGATION: Use the arrow buttons (UP, DOWN, LEFT, RIGHT) and ENTER button to navigate menus on your AV Receiver's display.
- RETURN: Press the RETURN button to go back to the previous menu or exit a menu.
4.2 Advanced Functions
The remote includes buttons for various advanced functions specific to Pioneer AV Receivers, such as:
- BD MENU: Access Blu-ray Disc menu functions.
- AUDIO PARAMETER: Adjust audio settings.
- TUNER: Control radio functions.
- SETUP: Access the receiver's main setup menu.
- BASS/TREBLE: Adjust bass and treble levels.
- SPEAKER/DIMMER: Control speaker settings or display brightness.
- Numeric Keypad (0-12): For direct input or channel selection.
Refer to your Pioneer AV Receiver's original manual for detailed instructions on specific functions.
5. Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Care:
- Replace batteries when the remote becomes unresponsive or its range decreases.
- Remove batteries if the remote will not be used for an extended period to prevent leakage.
- Dispose of used batteries according to local regulations.
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
6. Troubleshooting
- Remote not working:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote and the AV Receiver's IR sensor.
- Make sure you are within the effective range of the remote control.
- Specific buttons not responding:
- Some functions may be specific to certain AV Receiver models or input modes. Refer to your receiver's manual.
- Clean the remote control, especially around the unresponsive buttons, to remove any dirt or debris.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | zap |
| Model Number | AXD7534 |
| Wireless Communication | IR (Infrared) |
| Frequency | 433 MHz |
| Channel | 3 |
| Support APP | No |
| Use | TV (Compatible with AV Receivers) |
| Package | Yes |
| Origin | Mainland China |
| Certification | None |
8. User Tips
- Verify Compatibility: Before use, always double-check that the remote's appearance and model numbers (AXD7534, AXD7568) match your original remote or that your AV Receiver model is listed as compatible.
- Direct Line of Sight: For optimal performance, ensure a clear line of sight between the remote's IR emitter and your AV Receiver's IR sensor.
- Battery Quality: Use good quality AAA batteries for reliable and long-lasting operation.
9. Warranty and Support
For any issues or questions regarding your remote control, please contact the seller or manufacturer for assistance. Keep your purchase records for warranty claims, if applicable.
