COOSPO BC107

Contents

COOSPO BC107 GPS Bike Computer User Manual

Model: BC107

Brand: COOSPO

1. Introduction

The COOSPO BC107 is a compact yet powerful GPS bike computer designed to track your cycling activities with precision. It features a 2.4-inch FSTN screen for clear readability, GPS and BEIDOU positioning for accurate data, and ANT+ compatibility for various sensors. This manual provides detailed instructions for setting up, operating, and maintaining your BC107 bike computer.

COOSPO BC107 GPS Bike Computer front view

Figure 1: COOSPO BC107 GPS Bike Computer

Video 1: COOSPO BC107 Product Overview

2. Setup

2.1 Standard Accessories

The BC107 package includes the following items:

  • Main Device x 1
  • Charging Cable x 1
  • User Manual x 1
  • Standard bike mount x 1
  • Rubber pad for standard bike mount x 1
  • Rubber ring x 2
Diagram of standard accessories for BC107

Figure 2: Standard Accessories

2.2 How to Install

Follow these steps to install your BC107 bike computer:

  1. Install the rubber pad onto the mount.
  2. Tie the mount onto the handlebar with the rubber rings.
  3. Securely tie up the mount.
  4. Install the main device onto the mount.
  5. Rotate the main device for 90 degrees to lock it in place.
  6. Installation is completed.
Installation steps for COOSPO BC107 bike computer

Figure 3: Installation Guide

2.3 Charging

Before first use, please charge the device fully. Use a DC 5V power adapter for charging. The battery icon will flash during charging and remain solid when fully charged.

  • Open the rubber cover.
  • Connect the device with the USB cable to charge.
  • Use a USB DC 5V power adapter or a computer USB port.

Important: The product has a built-in battery. Do not throw the product into a fire. Please choose an adapter that meets the rated voltage of the device to charge it, to avoid damage.

2.4 Acquiring Satellite Signals

For accurate GPS tracking, ensure the device is outdoors and has a clear view of the sky. It typically takes 15-90 seconds to locate satellite signals. Remain stationary during acquisition. The device uses GPS for speed tracking when a speed sensor is not connected; otherwise, it prioritizes the speed sensor.

2.5 Connecting with ANT+ Sensors

The BC107 maximizes compatibility with ANT+ sensors. To connect, ensure your sensors are in wake-up mode.

  • Heart Rate Monitor: Wear it correctly to wake it up.
  • Speed Sensor, Cadence Sensor, Power Meter: Awaken them by turning the pedals or wheels.

Note: Additional purchase is required for heart rate monitor, speed sensor, cadence sensor, and power meter.

Diagram showing ANT+ sensor compatibility with heart rate monitor, speed/cadence sensor, and power meter

Figure 4: ANT+ Sensor Compatibility

2.6 Bluetooth Connection (CoospoRide App)

The BC107 can be set up wirelessly and sync data via the CoospoRide App.

  1. Download the CoospoRide App from Google Play or the App Store.
  2. Power on the bike computer.
  3. Open the CoospoRide App, navigate to the binding section, and select BC107 from the device list to bind it. Ensure your phone's Bluetooth is on and permissions are granted.
  4. In the activity page of the App, click on the connected device to enter the record synchronization operation page.
  5. Through authorization to Strava in the App settings, your cycling data can be synchronized to the Strava platform.
  6. Select the record to be synchronized and click 'Sync'. The record on the computer will be automatically deleted after synchronization.

Note: BC107 only supports ANT+ connection for sensors and does not support Bluetooth connection for sensors at this time. Bluetooth is used for app connectivity and data sync.

CoospoRide App interface for device settings and data analysis

Figure 5: CoospoRide App Interface

Diagram showing synchronization from CoospoRide App to Strava

Figure 6: Sync to Strava via CoospoRide App

3. Operating Instructions

3.1 Button Functions

The BC107 features three main buttons for navigation and control:

  • Left Button:
    • Short Press: Mark a new lap.
    • Hold for 2 seconds: Power off. (When powered on, short press to turn on).
    • In setting mode: Exit / return and save the setting.
  • Mid Button:
    • Short Press: Pause / Continue. (Short press to start recording after power on).
    • Hold for 2 seconds: Save the exercise record and exit the exercise.
    • In setting mode: Enter the current setting / switch the number of digits.
  • Right Button:
    • Short Press: Page turning.
    • Hold for 2 seconds: Setting mode.
    • In setting mode: Switch setting options / switch the numerical.

3.2 Status Icons

The display shows various icons indicating the device's status and data:

Icon/IndicatorDescription
88:88Time
No satellite iconNo satellite signal
Satellite iconSatellite signal level (Weak, Normal, Strong)
((()))Accessory connecting status
Play iconUnder exercising
Pause iconManual pause
Bluetooth iconConnected with App by BLE
°C / °FTemperature
Battery iconBattery level
AVGAverage
MAXMaximum
MPHMiles per hour
KMHKilometers per hour
Up/Down arrowsIncreased & Decreased
HRMHeart Rate
CADCadence
GRAGradient
TIMESport time
ALTAltitude
ODOOdometer (Total distance)
DSTDistance
ASTAscend Distance
CALCalories
LAPLap count
PWRPower
UTCTime zone

3.3 Cycling

To start an exercise, turn on the device and press the Mid Button. During cycling, if the speed is 0, the device will automatically pause. If no data is received for speed, cadence, or heart rate within 15 minutes, the device will enter sleep mode. Press the Mid Button to resume.

  • Press Mid Button: Pause/Continue.
  • Hold Mid Button: Stop exercise and save the riding data.
  • Short Press Right Button: Page turning to switch the display.
  • Short Press Left Button: Mark a new lap.

3.4 GPS Positioning

GPS searching starts automatically after power on. Begin cycling once GPS positioning is successful. If you start riding before successful GPS positioning (and no speed sensor is connected), speed data will display as "--.-", while other data remains the same. For better GPS signal, stand still for 3-5 minutes to establish more satellite connections. Ensure you are outdoors for positioning, as bad weather or dense forests may affect the GPS signal.

3.5 Setting the Wheel Size

To set the wheel size:

  1. Hold the Right Button (>) for 2 seconds to enter setting mode.
  2. Press the Right Button (>) to switch to page P2.
  3. Press the Mid Button (►II) to enter the wheel size setting.
  4. Press the Mid Button (►II) to select the digit to set, then press the Right Button (>) to change the number.
  5. Press the Left Button (↵) to save and exit. The device will automatically exit in 6 seconds if no operation is detected.

Refer to the table below for common wheel sizes and their corresponding circumferences:

Wheel SizeCircumference (mm)Wheel SizeCircumference (mm)Wheel SizeCirc. (mm)
12 × 1.7593524 × 2.00192526 × 1.402005
14 × 1.5102024 × 2.125196526 × 1.502010
14 × 1.75105526 × 1.75202327 × 12145
16 × 1.5118526 × 1.95205027 × 1-1/82155
16 × 1.75119526 × 2.00205527 × 1-1/42161
18 × 1.5134026 × 2.10206827 × 1-3/82169
18 × 1.75135026 × 2.125207027.5 × 1.752114
20 × 1.75151526 × 2.35208327.5 × 2.1252174
20 × 1-3/8161526 × 3.00217027.5 × 1.52074
22 × 1-3/8177026 × 7/8192027.5 × 1.952146
22 × 1-1/2178526 × 1(59)191329 × 2.12288
24 × 1175326 × 1(65)195229 × 2.22298
24 × 3/4 Tubular178526 × 1.25195329 × 2.32326
24 × 1-1/8179526 × 1-1/81970650 × 35A2090
24 × 1-1/4190526 × 1-3/82068650 × 38A2125
24 × 1.75189026 × 1-1/22100650 × 38B2105
700 × 18C2070700 × 19C2080700 × 20C2086
700 × 23C2096700 × 25C2105700 × 28C2136
700 × 30C2170700 × 32C2155700C Tubular2130
700 × 35C2168700 × 38C2180700 × 40C2200
700 × 42C2224700 × 44C2235700 × 45C2242
700 × 47C2268

3.6 Time Zone Setting

To set the time zone:

  1. Hold the Right Button (>) for 2 seconds to enter setting mode.
  2. Press the Right Button (>) to switch to page P3.
  3. Press the Mid Button (►II) to enter the time zone setting (Default: UTC/GMT + 08:00).
  4. Press the Mid Button (►II) to select the digit to set, then press the Right Button (>) to change the number.
  5. Press the Left Button (↵) to save and exit. The device will automatically exit in 6 seconds if no operation is detected.

3.7 Setting Metric and Imperial Units

To set the units (KMH or MPH):

  1. Hold the Right Button (>) for 2 seconds to enter setting mode.
  2. Press the Right Button (>) to switch to page P4.
  3. Press the Mid Button (►II) to enter the unit setting (Default: KMH).
  4. Press the Right Button (>) to switch between KMH and MPH.
  5. Press the Left Button (↵) to save and exit. The device will automatically exit in 6 seconds if no operation is detected.

3.8 Power Calibration

To perform power calibration:

  1. Hold the Right Button (>) for 2 seconds to enter setting mode.
  2. Press the Right Button (>) to switch to page P5. The device will automatically attempt to calibrate.
  3. Short press the Mid Button (►II) to recalibrate. The value will flash during calibration and become solid upon successful calibration.
  4. After successful calibration, press the Left Button (↵) to save and exit. The device will automatically exit in 20 seconds if no operation is detected.

4. Maintenance

4.1 Water Resistance

The BC107 bike computer has an IPX7 water resistance rating. This means it can be used in the rain, provided the protective cover on the back is closed tightly. For heavy rain, it is recommended to remove the bike computer and place it in a waterproof bag to prevent damage.

4.2 General Care

  • Do not open or modify the product.
  • Do not disassemble or attempt to service this product yourself.
  • This product is safe under normal and reasonably foreseeable operating conditions.
  • Clean the device with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.

5. Troubleshooting

  • Slow GPS Signal Acquisition: Ensure you are in an open outdoor area with a clear view of the sky. Remain stationary for 3-5 minutes after powering on to allow the device to acquire satellite signals.
  • Device Not Connecting to App: Ensure Bluetooth is enabled on your phone and the CoospoRide App has the necessary permissions. Try restarting both the bike computer and your phone.
  • Power Measurement Issues: The BC107 is compatible with ANT+ power meters. Ensure your power meter is properly paired and calibrated.
  • Battery Life Shorter Than Expected: Ensure the device is fully charged before use. Factors like continuous GPS usage, backlight settings, and extreme temperatures can affect battery life.
  • No Speed Data Displayed: If no speed sensor is connected and GPS is not positioned, speed data will show as "--.-". Ensure GPS is acquired or a speed sensor is connected and active.

6. Specifications

FeatureSpecification
ModelBC107
Wireless TransmissionANT+ & BLE (Bluetooth for App only)
Display Size2.4" FSTN
Display ColorBlack and White
Weight64g
Automatic BacklightYes
Battery Life28 hours with GPS
Power1000mAh rechargeable lithium battery
Positioning SystemGPS+BDS
Parameters Displayed20+ (Distance, Speed, Time, Altitude, Temperature, Atmospheric Pressure, Heart Rate, Cadence, Power)
Supported SensorsHeart rate sensor, speed & cadence sensor, power meter (ANT+ only)
Storage8M (80 hours history), .fit file format
Water RatingIPX7
Physical Dimensions80*54*20.64mm
Operating EnvironmentTemperature 0℃ ~ 50℃
Charging Interface TypeType-C
CertificationCE, FCC, RoHS, KC
Comparison table of COOSPO bike computer models BC26, BC107, BC200

Figure 7: COOSPO Bike Computer Model Comparison

7. User Tips

  • GPS Acquisition: Some users report long satellite search times. For best results, ensure you are in an open area with a clear view of the sky and remain stationary for a few minutes after powering on.
  • App Functionality: The CoospoRide App is primarily for device settings, recording and analyzing cycling activity records, and firmware updates. It also facilitates syncing your .fit files to platforms like Strava.
  • External Mount: While some product images and reviews may suggest an external mount, please refer to the 'Standard Accessories' section for what is included in your specific package.
  • Backlight: The automatic backlight feature is highly appreciated for visibility in various conditions.

8. Warranty and Support

8.1 Responsibility Disclaimer

The information in this manual is for reference only. The product may be subject to alterations due to ongoing research and development without prior notice. The manufacturer is not legally responsible for any direct or indirect, accidental, or special damages, losses, and expenses arising from or in connection with this manual or the contained product.

8.2 FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

8.3 IC Warning

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

8.4 Product Disposal

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.

For further assistance or to download the electronic manual in multiple languages (English, Spanish, German, French, Italian, Turkish, Japanese), please visit: https://www.coospo.com/download-center-bc107/

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.