Introduction
This manual provides detailed instructions for the Scimagic-RC 4-channel rolling code remote control, designed for compatibility with SOMMER and APERTO garage door systems. This high-quality, robust replacement remote includes a protective sliding key cover and is engineered to pair seamlessly with your existing receiver unit. Please read these instructions carefully before attempting to program or operate your new remote control.
Video: Overview of the Scimagic-RC remote control, demonstrating its design, features, and remote control distance capabilities.
Package Contents
Each package contains the following items:
- 3x Remote Control units
- 3x CR2032 Batteries (pre-installed or included separately)
- 3x Keychains
- 1x English Instruction Manual
Image: Three remote control units, as typically included in a package.
Compatibility
This remote control is compatible with the following SOMMER and APERTO models operating at 868MHz with rolling code technology:
- SOMMER: 4011, 4020, 4021, 4025, 4026, 4031, 4035
- APERTO: 4021, 4025
Image: Visual representation of the remote's compatibility with various SOMMER and APERTO original remote models.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Scimagic-RC |
| Model Number (Compatible) | SOMMER |
| Name | SOMMER Garage Remote Control |
| Frequency | 868MHz |
| Coding Method | Rolling Code |
| Number of Buttons | 4 |
| Power Battery | CR2032 |
| Dimensions (L x W x H) | 70 mm × 33 mm × 12 mm |
| Remote Control Distance | 30-150m (Open area, no interference, can reach more than 100m) |
| Certification | CE |
| Origin | Mainland China |
Image: Diagram illustrating the physical dimensions of the remote control unit.
Setup and Programming
To program your new Scimagic-RC remote control to your SOMMER or APERTO receiver, follow these steps:
- Locate the Radio Receiver: Find the radio receiver on the circuit board of your garage door opener. Look for a red button or text indicating "code" or "radio" next to it.
- Activate Learning Mode: Press the learning button (often labeled 'A') on the radio receiver.
- Transmit Code: Within a few seconds of activating learning mode, press the desired button on your new remote control handset (often labeled 'B'). The remote control will transmit its radio code to the receiver. A corresponding LED light on the receiver will typically go out or change state to confirm successful pairing for the selected channel.
- Program Additional Remotes: Repeat the procedure above for any additional remote control handsets you wish to program.
Note: The remote control functions identically to your original remote. It must be programmed with the original receiver according to your original manual when you receive it. If you encounter difficulties, refer to your garage door opener's original manual for specific receiver programming instructions.
Operating Instructions
Once programmed, operating your Scimagic-RC remote control is straightforward:
- Open/Close Garage Door: Press the programmed button on the remote control to open or close your garage door.
- Multiple Doors: If you have programmed multiple garage doors or gates to different buttons, press the corresponding button for the desired door/gate.
- Range: The remote control has an effective range of 30-150 meters in an open area without interference. Performance may vary based on environmental factors and obstructions.
Image: A hand demonstrating the pressing of a button on the remote control.
Maintenance
- Battery Replacement: The remote control uses a CR2032 battery. If the remote's range decreases significantly or the LED indicator does not light up when a button is pressed, it may be time to replace the battery. Carefully open the remote casing (usually by prying it open with a small flat-head screwdriver) and replace the old battery with a new CR2032, ensuring correct polarity.
- Cleaning: Clean the remote control with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Protective Film: The remote may come with a protective film on its surface. This can be removed for a clearer view or kept on for added scratch protection.
- Storage: Store the remote control in a dry place, away from extreme temperatures and direct sunlight.
Troubleshooting
- Remote Not Working After Programming:
- Ensure the battery is correctly installed and not depleted.
- Verify that the remote was programmed correctly according to the steps in the "Setup and Programming" section and your garage opener's manual.
- Check if the garage door opener's receiver is functioning correctly.
- Ensure the remote is within the operational range of the receiver.
- Reduced Range:
- Replace the battery.
- Check for sources of interference (e.g., other wireless devices, metal objects) between the remote and the receiver.
- Ensure there are no significant obstructions blocking the signal path.
- LED Indicator Not Lighting Up:
- The battery may be dead or incorrectly installed. Replace or re-install the battery.
Warranty and Support
This product is designed for reliable performance. For any issues not covered in this manual, please contact the seller or manufacturer for support. Keep your purchase records for warranty claims, if applicable.
