KKMOON 4D 16 Lines Laser Level

Contents

KKmoon 4D 16 Lines Laser Level User Manual

Model: 4D 16 Lines Laser Level

1. Introduction

The KKmoon 4D 16 Lines Laser Level is a versatile and precise tool designed for various indoor construction and calibration tasks. It can emit visible laser horizontal, vertical, and tilt lines separately or simultaneously, providing accurate datum for projects such as flooring tile layout, paneling, wallpapering, stenciling, wainscoting, finish carpentry, wall stud layout, and partition installation.

This device features a compact, lightweight, and portable design, ensuring quick and convenient mobility and storage. It incorporates a 3° self-leveling system for enhanced flexibility and stability, and utilizes high-quality laser diodes and precision conical mirrors to produce fine, bright laser lines with high accuracy.

Graphic emphasizing 4D 16 Lines

Figure 1: 4D 16 Lines Laser Projection

2. Safety Precautions

WARNING: To prevent injury and ensure proper operation, please read and understand all safety instructions before using this product.

  • The laser output is located on the output hole.
  • Do not stare directly at the laser light. Direct exposure to the laser beam can cause eye damage.
  • Do not disassemble the instrument or attempt internal repairs yourself. Unauthorized modifications can lead to hazardous laser radiation exposure and void the warranty.
  • This instrument meets the laser radiation safety rating standard (Class 2, output power <1mW).
  • Keep the device out of reach of children.

3. Package Contents

Please check the package contents upon receipt to ensure all items are present and undamaged:

  • 1 x Laser Level Machine
  • 4 x 18650 Li-ion Batteries (3.7V, 2200mAh each)
  • 1 x Battery Recharger
  • 1 x Wall-mounted Bracket
  • 1 x Iron Board
  • 1 x Lifting Platform
  • 1 x Remote Controller
  • 1 x Carrying Bag
  • 1 x Guideline (User Manual)
All components of the KKmoon 4D 16 Lines Laser Level kit, including the laser level, batteries, charger, wall bracket, remote, and carrying bag.

Figure 2: Complete Package Contents

4. Product Overview

Familiarize yourself with the components and controls of your laser level:

Detailed product diagram of the KKmoon 4D 16 Lines Laser Level, labeling horizontal and vertical laser lines, battery compartment, power switch, control panel with H, V, and OD buttons, and the vertical lifting platform.

Figure 3: Product Diagram with Labeled Components

  • Laser Output Windows: Project the 360° horizontal and vertical laser lines.
  • Control Panel: Features 'H' (Horizontal line switch), 'V' (Vertical line switch), and 'OD' (Outdoor/Brightness/Tilt mode) buttons.
  • Power Switch: Slide switch to turn the device ON/OFF.
  • Battery Compartment: Houses the 18650 li-ion batteries.
  • Vertical Lifting Platform: Adjustable platform for precise height positioning.
  • T-shape Bracket: Wall-mounted bracket with 360° rotatable base and fine adjustment mechanism (6mm wall mounted distance, 1/4 inch screw size).

5. Specifications

FeatureSpecification
Brand NameKKMOON
Model Number4D 16 Lines Laser Level
TypeVertical & Horizontal Lasers
Measurement Model16 Lines (3 * 360° / 4D)
Laser ClassClass 2, output power <1mW
Laser Wavelength532nm (Green Laser)
Self-leveling Range±3°
Line Working Distance85 Feet (300LUX)
Power Source2 x 18650 Li-ion batteries (3.7V, 2200mAh each)
Working Temperature-10℃ to +50℃ (14℉ to 122℉)
Waterproof GradeIP54
Device Dimensions147 x 87 x 140mm (5.79 x 3.43 x 5.51in)
Item Weight1558g (3.43lb)
CertificationNone specified
OriginMainland China

6. Setup

6.1. Battery Installation

  1. Locate the battery compartment on the laser level.
  2. Insert two 18650 li-ion batteries, ensuring correct polarity (+/-). Four batteries are included, allowing for extended use or spares.
  3. Close the battery compartment securely.
  4. To charge the batteries, use the provided battery recharger.

6.2. Mounting the Laser Level

The laser level can be used freestanding or mounted using the included accessories:

  • Vertical Lifting Platform: Place the laser level on the lifting platform for adjustable height. The platform has an anti-slip texture for stable placement.
  • T-shape Wall-mounted Bracket: Attach the T-shape bracket to a wall using appropriate fasteners. The laser level can then be mounted onto the bracket. The bracket features a 360° rotatable base and a fine adjustment mechanism to quickly find the target. It has a 6mm wall mounted distance and a 1/4 inch screw size for compatibility.
  • Tripod Mounting: The laser level's 360° rotatable base has a 1/4 inch thread, allowing it to be connected to a standard 1/4 inch thread tripod (not included) for adjusting the working height.
KKmoon 4D 16 Lines Laser Level mounted on its vertical lifting platform.

Figure 4: Laser Level on Lifting Platform

7. Operation

7.1. Powering On and Self-Leveling

  1. Ensure batteries are correctly installed.
  2. Slide the power switch to the ON position (push right). The device will power on and automatically attempt to self-level.
  3. The self-leveling system works within a ±3° angle. If the angle exceeds 3°, the laser light will keep blinking, and the device will emit a beep sound, indicating it needs to be reset on a flatter surface.
Diagram illustrating the self-leveling function and alarm. The laser level automatically levels within 3 degrees. If tilted beyond 3 degrees, the laser blinks and an alarm sounds, indicating a need to reset on a flat ground.

Figure 5: Self-Leveling and Alarm Function

7.2. Line Mode Selection

Use the touch buttons on the control panel or the remote controller to select laser line modes:

  • 'H' Button (Horizontal Line Switch): Press to toggle horizontal laser lines ON/OFF.
  • 'V' Button (Vertical Line Switch): Press to toggle vertical laser lines ON/OFF.
  • You can activate horizontal and vertical lines separately or simultaneously.
Diagram showing the 4D 16 lines laser projection, creating a complete grid of horizontal and vertical lines in a room.

Figure 6: 4D 16 Lines Laser Projection

7.3. Tilt Mode and Brightness Adjustment

  • Tilt Mode: Press and hold the 'OD' button for 3 seconds to enter tilt mode. In this mode, you can place the laser tool at any angle to project tilt lines without the self-leveling alarm.
  • Brightness Adjustment: Briefly press the 'OD' button (short press) to adjust the laser brightness. There are 4 gears of brightness adjustable to suit different working conditions.

7.4. Applications

The laser level is suitable for a wide range of applications:

Examples of the laser level in use for construction tasks like bricklaying and wall leveling, demonstrating its utility for vertical and horizontal alignment.

Figure 7: Laser Level in Application (Bricklaying, Wall Leveling)

The laser level being used for tiling, demonstrating its self-leveling system for precise alignment.

Figure 8: Self-Leveling System in Tiling Application

Four views of the laser level demonstrating its 360-degree rotation capability.

Figure 9: 360-degree Rotation Capability

8. Maintenance

  • Keep the laser level clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Store the device in its carrying bag when not in use to protect it from impacts and environmental factors.
  • Remove batteries if the device will not be used for an extended period to prevent leakage.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
  • The device is waterproof and dustproof (IP54 rated), but avoid submerging it in water.

9. Troubleshooting

9.1. Laser Light Blinking and Beeping

Issue: The laser light is blinking and the device is making a beep sound.

Cause: This indicates that the laser level is tilted beyond its self-leveling range (greater than 3°).

Solution: Reset the laser level on a flatter, more level ground or surface. Ensure the device is within the ±3° self-leveling range for automatic leveling to function correctly.

9.2. No Laser Output

Issue: The device is powered on, but no laser lines are visible.

Solution:

  • Check battery charge. Recharge or replace batteries if necessary.
  • Ensure the 'H' and 'V' buttons have been pressed to activate the desired horizontal or vertical lines.
  • Verify that the device is not in an error state (e.g., blinking and beeping due to excessive tilt).

10. User Tips

  • For outdoor use or in brightly lit environments, adjust the laser brightness using the 'OD' button for better visibility.
  • When precise angle projection is needed, utilize the tilt mode by holding the 'OD' button for 3 seconds.
  • Always ensure the working surface is as level as possible before activating the self-leveling function to minimize setup time.

11. Warranty and Support

This product is manufactured to high-quality standards. For any issues or support inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.