HOTO QWLSD010

Contents

HOTO Precision Screwdriver Kit 25-in-1 User Manual

Model: QWLSD010

1. Introduction

The HOTO Electric Precision Screwdriver Kit is designed for fast and precise service, offering both manual and automatic screwing capabilities. This kit includes 25 high-precision S2-steel bits suitable for a wide range of repair and assembly tasks, from electronics to household items. Its compact and ergonomic design ensures comfortable and efficient use.

HOTO Precision Screwdriver Kit with screwdriver, bit case, and key features
Figure 1: HOTO Precision Screwdriver Kit overview, highlighting one-press switch-on, capacity for 500+ screws, magnetic storage, and 170 rpm strong power.

2. Package Contents

Your HOTO Precision Screwdriver Kit includes:

  • 1 x HOTO Electric Precision Screwdriver
  • 1 x Storage Case with Semi-auto Hinged Lid
  • 25 x S2-Steel Precision Bits (C4x28mm)
  • 1 x USB-C Charging Cable (not explicitly listed but implied by charging port)

3. Setup

3.1 Charging the Screwdriver

Before first use, ensure the screwdriver is fully charged. The device features a USB-C charging port, compatible with standard USB-C cables. Connect the screwdriver to a power source using a USB-C cable. The two-color power indicator light will provide charging status.

Close-up of the USB-C charging port on the HOTO screwdriver
Figure 2: USB-C charging port for convenient recharging.

3.2 Inserting/Changing Bits

The screwdriver features a magnetic chuck for quick and easy bit installation and removal.

  1. Open the semi-auto hinged lid of the storage case to access the bits.
  2. Select the appropriate precision bit for your task.
  3. Insert the chosen bit into the magnetic chuck of the screwdriver until it is securely seated.
  4. To remove, simply pull the bit out of the chuck.
Diagram showing magnetic bit storage and magnetic bit installation
Figure 3: Dual magnets facilitate swift storage and installation of bits.

4. Operating Instructions

4.1 Powering On/Off and Direction Control

The screwdriver features an intuitive forward-and-reverse two-in-one button for easy operation.

  • Press the "^" button to screw in (forward rotation).
  • Press the "V" button to screw out (reverse rotation).
  • The one-press-to-switch-on design allows for immediate use.
Close-up of the HOTO screwdriver showing the forward and reverse buttons
Figure 4: Intuitive forward-and-reverse button for easy control.

4.2 Manual and Electric Modes

Important Safety Note: To ensure the precision of the equipment is not damaged, please use manual mode to loosen large screws before turning on electric mode!

The HOTO screwdriver supports both manual and electric modes. For initial loosening of tight screws or for tasks requiring more delicate control, use the screwdriver manually. Once the screw is slightly loosened, you can switch to electric mode for faster operation.

4.3 Magnetizer Function

The storage case includes a built-in magnetizer. This allows you to magnetize the provided bits or any other screwdrivers, making it easier to pick up and handle micro screws.

Image showing the built-in magnetizer on the HOTO screwdriver case
Figure 5: Built-in magnetizer for convenient bit magnetization.

4.4 Usage Scenarios

The 25 precision bits are designed to meet daily needs for precision service, disassembly, and assembly across various scenarios, including:

  • Repairing cameras
  • Repairing game controllers
  • Repairing speakers
  • Repairing game consoles
  • Repairing keyboards
  • Repairing computer mice
  • Servicing glasses and watches
  • Disassembling or assembling motherboards
Collage of images showing the HOTO screwdriver being used to repair various electronics like a camera, controller, speaker, game console, keyboard, and mouse
Figure 6: Wide range of usage scenarios for the precision screwdriver kit.
Video 1: Product demonstration showcasing the HOTO Precision Screwdriver Kit in action for various repair tasks, including opening a laptop, tightening screws on a PC, and replacing batteries in a remote control.

5. Maintenance

5.1 Cleaning

Wipe the screwdriver and bits with a clean, dry cloth after each use to remove dust and debris. Avoid using harsh chemicals or abrasive materials that could damage the finish or bits.

5.2 Storage

Always store the screwdriver and bits in their designated storage case. The magnetic storage system keeps bits neat and tidy, preventing loss and damage. The semi-auto hinged lid protects the contents when not in use.

Image of the HOTO screwdriver kit case with its semi-auto hinged lid open
Figure 7: Semi-auto hinged lid storage case for organized and protected storage.

5.3 Battery Care

To prolong battery life, avoid completely draining the battery frequently. Recharge the screwdriver when the power indicator suggests low battery. Store the device in a cool, dry place away from extreme temperatures.

6. Troubleshooting

6.1 Screwdriver Not Turning On/Operating

  • Ensure the battery is charged. Connect to a USB-C power source and allow it to charge.
  • Check if the correct direction button (forward/reverse) is being pressed firmly.

6.2 Bit Slipping or Damaging Screws

  • Ensure the correct bit size and type is selected for the screw head.
  • Verify the bit is fully inserted into the magnetic chuck.
  • For very tight screws, use manual mode to initially loosen them before engaging electric mode to prevent damage to the equipment or screw head.
  • The bits are S2-steel with 60HRC hardness, designed for durability. If a bit is worn, replace it.

6.3 Screws Not Attaching to Bit

  • Use the built-in magnetizer on the case to re-magnetize the bit.
  • Ensure the screw is made of a ferromagnetic material.

7. Specifications

Technical data sheet for HOTO Electric Precision Screwdriver Kit
Figure 8: Detailed technical data including size, bits information, and power/battery specifications.
Product Specifications
FeatureDetail
Product NameElectric Precision Screwdriver Kit
ModelQWLSD010
WeightAbout 314g
Case DimensionsAbout 182 x 71.3 x 26.1 mm
Screwdriver DimensionsAbout 159 x Ø17 mm
StandardGB/T 3883.1-2014, GB/T 3883.202-2019
Max. Electric Torque0.2 N·m
Max. Manual Torque3 N·m
No-load Speed170 rpm
Bit ModelC4x28mm
Bit MaterialS2-Steel (60HRC hardness)
Bit TypesSlotted (SL1.5/SL2.0), Phillips (PH000/PH00/PH0/PH1/PH2), Hexagon (H0.7/H0.9/H1.5/H2.0), Torx (T2/T3/T4), Security Torx (T5H/T6H/T8H/T9H/T10H), Pentalobe (P2/P5), Pozidriv (W1.5), Y-Shaped (Y0.6), Tri-Wing (TW1), Triangle (2.3)
Battery TypeLi-ion
Battery Capacity350 mAh
Input5V ⎓ 0.14A
Rated Voltage3.7V ⎓
Charge Time160-200 min
CertificationCE, Dot, FCC

8. User Tips

  • For laptops and other delicate electronics, it is often recommended to manually loosen screws slightly before using the electric mode to prevent stripping or damage.
  • The bits are standard size, so additional bits from other sets may be compatible if needed.
  • The screwdriver is not dielectric; exercise caution when working with live electrical components.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official HOTO website. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.