ZHRIVOER XD10-3

Contents

XD10-3 Indicator Light User Manual

Model: XD10-3

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the ZHRIVOER XD10-3 series indicator lights. These small signal indicator lights are designed for various applications requiring visual status indication, available in multiple voltage options and colors.

Three XD10-3 indicator lights in yellow, green, and red

Figure 1: ZHRIVOER XD10-3 Indicator Lights (Yellow, Green, Red)

Safety Information

  • Always disconnect power before installation or maintenance to prevent electric shock.
  • Ensure the indicator light's voltage rating matches the power supply.
  • Installation should be performed by qualified personnel if you are unsure about electrical wiring.
  • Do not expose the product to excessive moisture or extreme temperatures.
  • Verify all connections are secure to prevent short circuits.

Package Contents

Each package typically contains:

  • 1 x XD10-3 Indicator Light (specified color and voltage)
  • 1 x Metal Fixing Nut
  • 1 x Washer

Specifications

Product information diagram showing dimensions and available colors

Figure 2: Product Information and Dimensions

Feature Detail
Model Number XD10-3
Brand Name ZHRIVOER
Item Type Indicator Lights
Voltage Options 12V, 24V (DC), 220V (AC)
Available Colors Red, Yellow, Green
Installation Hole Diameter 10mm
Head Diameter Approx. 13.5mm
Total Length Approx. 41mm
Light Source High-brightness pure color LED chip
Luminous Flux <60 Lumens
Power Source AC (for 220V models), DC (for 12V/24V models)
Certification CE
Origin Mainland China
Detailed dimensions of the indicator light, showing 13.5mm head, 41mm length, and 10mm mounting hole

Figure 3: Detailed Dimensions (13.5mm head, 41mm length, 10mm mounting hole)

Setup and Installation

  1. **Prepare Mounting Hole**: Drill a 10mm diameter hole in the desired panel or enclosure. Ensure the panel thickness is suitable for the indicator light's threaded body.
  2. **Insert Indicator Light**: Insert the indicator light through the prepared hole from the front of the panel.
  3. **Secure with Nut**: Place the washer and then thread the metal fixing nut onto the indicator light's body from the back of the panel. Tighten the nut securely to hold the light in place. Close-up of the metal nut for securing the indicator light

    Figure 4: Metal Fixing Nut Detail

  4. **Wiring**: Before wiring, ensure the power supply is disconnected.
    • Identify the two terminals on the back of the indicator light.
    • Connect the appropriate power wires to these terminals. For DC models (12V/24V), ensure correct polarity if specified (though many LEDs have built-in rectification for simple indicator use). For AC models (220V), polarity is generally not a concern.
    • Ensure all connections are firm and insulated to prevent accidental contact.
  5. **Test**: Once installed and wired, apply power to test the indicator light's functionality.

Operating Instructions

The ZHRIVOER XD10-3 indicator light is a simple visual signaling device. It illuminates when power is supplied to its terminals, indicating the status of a circuit or system.

  • **Power On**: When the rated voltage (e.g., 12V DC, 24V DC, or 220V AC) is applied to the terminals, the LED will light up.
  • **Power Off**: When power is removed, the LED will turn off.
  • The color of the illuminated light (Red, Yellow, or Green) provides the specific status indication as per your system design.

Maintenance

  • **Cleaning**: Periodically wipe the lens with a soft, dry cloth to remove dust and ensure clear visibility. Do not use abrasive cleaners or solvents.
  • **Inspection**: Regularly check the wiring connections for any signs of loosening or corrosion.
  • **Replacement**: If the LED fails to illuminate, first check the power supply and wiring. If these are correct, the indicator light may need to be replaced.

Troubleshooting

Problem Possible Cause Solution
Indicator light does not illuminate. No power supply.
Incorrect voltage.
Loose wiring connection.
Faulty indicator light.
Verify power is supplied to the circuit.
Ensure the voltage matches the light's rating (e.g., 24V for a 24V light).
Check and secure all wiring connections.
Replace the indicator light if all other checks pass.
Light flickers or is dim. Unstable power supply.
Poor connection.
Voltage fluctuation.
Check power source stability.
Inspect and tighten wiring connections.
Ensure stable voltage supply.
Light is not securely mounted. Nut is loose.
Incorrect hole size.
Tighten the metal fixing nut.
Ensure the mounting hole is exactly 10mm.

User Tips

  • Users have reported that the lights are reliable and function as expected.
  • Ensure you select the correct voltage (12V, 24V, or 220V) and color for your specific application before purchase.
  • The compact size and light weight make these suitable for various panel installations.

Warranty and Support

This product is manufactured to high-quality standards. For any issues or support, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.