1. Introduction
Thank you for choosing the BaoFeng UV-13 PRO V2 Walkie Talkie. This device is a powerful, dual-band, waterproof two-way radio designed for reliable communication. It features a 10W output power, up to 999 memory channels, and convenient Type-C charging. This manual provides essential information for the safe and efficient operation of your walkie talkie.
2. Package Contents
Please check the box for the following items:
- 1 x Portable Radio (Host)
- 1 x Antenna
- 1 x Li-ion Battery Pack
- 1 x Type-C USB Charger
- 1 x Belt Clip
- 1 x Lanyard
- 1 x Headset
- 1 x User's Manual
Note: Additional accessories may vary depending on your specific purchase.
3. Setup
3.1. Battery Installation and Charging
- Ensure the walkie talkie is powered off.
- Align the battery pack with the grooves on the back of the radio and slide it into place until it clicks securely.
- To charge, connect the Type-C USB cable to the radio's Type-C port and plug the other end into a compatible USB power source (e.g., wall adapter, power bank, laptop, car charger). The charging indicator will show the charging status.
3.2. Antenna Attachment
Screw the antenna clockwise into the connector on the top of the radio until it is finger-tight. Do not overtighten.
3.3. Initial Power On
Rotate the Power/Volume switch clockwise to turn on the radio. Adjust the volume to a comfortable level.
3.4. Programming
The UV-13 PRO V2 can be programmed via a programming cable using software like Chirp, or manually through the keypad in VFO mode.
3.4.1. Manual Programming in VFO Mode
You can set up your walkie-talkie by manually entering frequencies through the keypad. To switch into VFO mode, short press the [MENU] button.
3.4.2. Wireless Copy Frequency
This feature allows for quick frequency copying from another walkie talkie.
- Step 1: Power on your walkie talkie. Press the [MENU] key and the "*" key simultaneously. The display will show "SEEK...". Press the up and down keys to switch between UHF and VHF.
- Step 2: Power on the target walkie talkie. Press and hold the PTT key of the target walkie talkie. Keep a distance of 10-30cm from your UV-13 PRO V2.
- Step 3: When your UV-13 PRO V2 searches and finds the other walkie talkie's frequency, press the [MENU] key to confirm.
- Step 4: Switch to channel mode. The display will show the other person's frequency, and you can begin communication.
4. Operating the Walkie Talkie
4.1. Basic Controls
- Power/Volume Switch: Rotate to turn on/off and adjust volume.
- Antenna: For transmitting and receiving signals.
- Flashlight: Located at the top, can be activated for illumination.
- FM/SOS Key: Activates FM radio or emergency SOS function.
- PTT Key (Push-to-Talk): Press and hold to transmit, release to receive.
- Lamp/Monitor Key: Activates the flashlight or monitors weak signals.
- Microphone: For voice input during transmission.
- Speaker: For audio output.
- LED Indicator: Green for receiving, Red for transmitting.
- LCD Display: Shows frequency, channel, battery status, and other information.
- Keypad: For manual frequency input, menu navigation, and function activation.
4.2. Key Features
- Dual Band (2m/70cm): Operates on both VHF and UHF frequencies.
- 999 Channels: Ample storage for various frequencies.
- Chirp Programmable: Compatible with Chirp software for advanced programming.
- Display Sync: Synchronized display for ease of use.
- 10W Power: High output power for extended range.
- VFO (Variable Frequency Oscillator): Allows direct frequency input.
- FM Radio: Built-in FM radio receiver (65-108MHz).
- Emergency Alarm: Activates an alarm signal in emergencies.
- VOX (Voice Operated Exchange): Hands-free transmission.
- Frequency CTCSS/DCS Scan: Scans for Continuous Tone-Coded Squelch System or Digital-Coded Squelch tones.
- DTMF Coding: Dual-Tone Multi-Frequency for advanced signaling.
- Wide/Narrow Band Selection: Choose between wide or narrow bandwidth for communication.
4.3. Long Range Communication
The UV-13 PRO V2 offers long-range communication capabilities, typically 5km-10km, depending on terrain and environmental conditions. Its high power output and dual-band functionality contribute to its effective range.
5. Maintenance
5.1. Cleaning
Regularly clean the radio's exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the Type-C port cover is properly sealed to maintain water resistance.
5.2. Battery Care
To prolong battery life, avoid overcharging or completely discharging the battery. Store the battery in a cool, dry place when not in use. The high-capacity Li-ion battery (8800mAh) provides extended operation time.
5.3. Water Resistance
The UV-13 PRO V2 has an IP45 rating, providing splash waterproof protection. While it can withstand splashes, it is not designed for submersion. Always ensure all port covers are securely closed.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Low or dead battery; Incorrect battery installation | Charge the battery; Reinstall battery correctly |
| Cannot transmit or receive | Incorrect frequency/channel; Antenna not properly attached; Out of range | Verify frequency/channel settings; Check antenna connection; Move closer to other radio |
| Poor audio quality | Low battery; Obstructions; Incorrect squelch setting | Charge battery; Move to an open area; Adjust squelch level |
| Wireless copy not working | Incorrect procedure; Distance too far/close; Target radio not transmitting | Follow wireless copy steps carefully; Maintain 10-30cm distance; Ensure target radio is transmitting |
| Programming issues with Chirp | Incorrect software version; Driver issues; Cable connection problem | Ensure correct Chirp model selection (UV-13 PRO); Install proper drivers; Check programming cable connection |
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | BAOFENG |
| Model Number | UV-13 PRO V2 |
| Output Power (W) | 5W-10W (Max 10W) |
| Battery Capacity (mAh) | High Capacity (8800mAh Li-ion) |
| Waterproof / Water-Resistant | IP45 |
| Material | Plastic |
| Storage Channel | Up to 999 |
| Frequency Range | 136-174MHz (Rx/Tx), 220-260MHz (Rx/Tx), 400-480MHz (Rx/Tx), 480-520MHz (Rx), 350-390MHz (Rx), 108-136MHz (Air frequency receiving), FM 65-108MHz |
| Dimensions (H x W x D) | 13cm x 3cm x 5.5cm (Radio body), 26.9cm / 10.6" (with antenna) |
| Walkie Talkie Type | Portable |
| Display | Yes |
| Maximum Range | 5km-10km (up to 4-8 miles) |
| Origin | Mainland China |
| Certification | CE, FCC |
| Voltage | 7.4V |
8. User Tips
- Maximize Range: For optimal range, ensure your antenna is securely attached and you have a clear line of sight to the other radio. Avoid transmitting from inside buildings or dense foliage if possible.
- Efficient Frequency Copying: Utilize the wireless copy frequency feature for quick and easy setup when communicating with other radios, saving time on manual programming.
- Chirp Software: The UV-13 PRO V2 is compatible with Chirp software for programming. Ensure you select the correct model (UV-13 PRO) within the software for proper functionality.
- Battery Life: The high-capacity battery provides extended usage. For long trips, consider carrying a power bank to utilize the convenient Type-C charging.
9. Warranty and Support
For after-sales service and technical support, please contact:
- Email: service@abbree.com
Software downloads, including programming software, can be found at:
- Website: https://www.abbree.cn/download
