1. Introduction
The OBDLink CX is a Bluetooth 5.1 BLE OBD2 adapter specifically designed for use with the Bimmercode application on both iPhone/iOS and Android devices. It enables car coding, diagnostics, and monitoring of OBD II compliant vehicles. This manual provides detailed instructions for setting up, operating, and troubleshooting your OBDLink CX adapter.
This document is a user guide for the BimmerCode app on the Toyota GR Supra, compiled from user experiences and forum inputs. It is not an official BimmerCode document. User experience may vary.
2. Package Contents
- OBDLink CX adapter
- Quick Start Guide
- Warranty Card
Please note: Bimmercode is not included in the package. You can purchase and download it from Google Play or the App Store.
3. Specifications
| Feature | Specification |
|---|---|
| Brand Name | OBDLink |
| Item Type | Code Readers & Scan Tools |
| Wireless Support | Bluetooth |
| Connection | Bluetooth 5.1 BLE |
| Special Features | Bluetooth |
| Software Update | Yes |
| Language | English |
| Software Version | OBDLINK and BIMMERCODE |
| Hardware Version | Newest |
| Supported Platforms | iOS, Android |
| Operating Voltage | 12V automotive systems |
| Dimensions | 1.8 X .9 X 1.3 inches (46 x 23 x 33 mm) |
| Device Weight | .7 oz (20 g) |
| Operating Humidity | 10 to 85% (non-condensing) |
| MAXIMUM PARAMETER ID (PID) RATE | 26 |
| Battery Included | No |
| High-concerned chemical | None |
| Certification | CE, FCC |
Supported OBD Protocols
- ISO 15765 (CAN for vehicle diagnostics)
- SAE J1939 (heavy duty vehicles)
- ISO 11898 (raw CAN)
- ISO 9141 (Asian, European, Chrysler vehicles)
- ISO 14230 (Keyword Protocol 2000)
4. Setup Guide
This section provides a quick start guide for setting up your OBDLink CX adapter for BimmerCode programming, specifically targeting iOS devices with ODBLink MX+ (firmware version 5.5.3) ODB2 adapter. The general steps apply to Android devices as well.
4.1. Applications
Before starting, download the following apps onto your iOS device:
- Get the ODBLink app.
- Get the BimmerCode app (free version).
- Upgrade the BimmerCode app to the full version (typically a one-time purchase).
4.2. Prepare the Car
- Ensure the car is in PARK and the parking brake is engaged.
- Put on the seatbelt to prevent the vehicle's iDrive from shutting down due to a power-saving timer.
- Start the car in Diagnostic mode (press the start button quickly 3 times without touching the brakes). The instrument cluster should display "Diagnostic mode" on the Dash screen.
- Turn off all electrical devices in the car (e.g., heater, interior/exterior lights) to decrease battery drain during programming.
- Power down or disconnect any third-party hardware installed in the car (e.g., rear view camera).
- Disconnect the iOS device in the iDrive settings in the car. (Path: iDrive COM → Manage mobile devices → Select the device → Delete device).
- Plug the ODBLink MX+ adapter into the OBD port on the driver side (footwell).
It is recommended to connect a battery charger to the car to ensure the battery does not drain during long programming sessions.
Image: The OBDLink CX adapter, showing its power, OBD, and link indicator lights.
4.3. Prepare iOS Device
Plug the iOS device into a USB power source to ensure it does not shut down during programming.
4.3.1. Update ODBLink MX+ Firmware
- Once connected to the ODBLink app, check for a firmware update. (Path: ODBLink Setting → Firmware Updates).
- If a firmware update is available, select [Firmware Updates] to update the ODB2 adapter. Wait until the update is complete.
- Exit the ODBLink app.
- Turn off Wi-Fi on the iOS device. (Path: iOS Settings → Wi-Fi → Disable).
4.3.2. Pairing iOS Device/Apps to ODBLink MX+ Adapter
- For Bluetooth pairing, press the Bluetooth search button on the ODB2 adapter. The Bluetooth LED will start blinking.
- Pair the iOS device with the ODB2 adapter. (Path: iOS Setting → Bluetooth → ODBLink MX+ → Connect).
- Configure the OBDLink app on the iOS device:
- Launch the ODBLink app and set Communication Type to Bluetooth. (Path: ODBLink Settings → Preferences → Communication → Bluetooth).
- Tap [Connect] on the ODBLink app main menu. The app will establish a connection and detect the OBD-II protocol. The 'BT' LED on the adapter will turn solid once connected.
Image: Easy pairing process to iOS and Android devices.
5. Operating Instructions
5.1. Launching the BimmerCode App
- Start the BimmerCode app on your iOS device.
- Configure the BimmerCode app:
- Select the target ODB2 adapter. (Path: BimmerCode Settings → Adapter → ODBLInk MX+).
- Return to the Settings Menu.
- Select the supported car. (Path: BimmerCode Settings → Supported cars → BMW → Z4 → G29 From 2018). Note: Using the BMW Z4 G29 configuration provides access to more control units. If uncomfortable, you can select Toyota GR Supra (J29, A90 From 2019), but some options may not be available.
- Select [Done] to return to the Settings Menu, then [Done] again to return to the Start Screen.
- Tap [Connect] on the Start Screen. The BimmerCode app will communicate with the car's control units and read configuration settings. This may take longer with Bluetooth/Wi-Fi adapters than Ethernet adapters. Once complete, available control units are displayed on the Main menu.
- You are now ready to begin coding.
Image: OBDLink CX is made for BimmerCode, offering 100% coverage for BimmerCode vehicles and features on iOS and Android.
5.2. Coding (Modifying Electronic Control Units' Configuration)
The BimmerCode app's main menu displays available electronic control units. The app offers two modes: BASIC and EXPERT. EXPERT mode may not be available for all control units.
- BASIC mode: Provides access to popular coding options. Recommended for most changes.
- EXPERT mode: For experienced users, providing access to low-level programming options. Not recommended for novices due to lack of detailed information.
5.2.1. Coding Process
- Select the car make/model/version as described in the Quick Start Guide and tap [Connect].
- A list of all supported electronic control units will be displayed on the main menu.
- Select the desired electronic control unit from the main menu. The app will read the control unit's configuration data, which may take some time.
- After selecting a control unit, the BimmerCode app will display the “BASIC Mode” menu.
- To access the EXPERT mode menu, select the [EXPERT mode] button at the bottom of the BASIC menu.
- Make the desired changes for the selected control unit. It is recommended to make only one change at a time to verify its effect.
- Tap [Code] to start the coding process.
Image: BimmerCode makes car coding easy, allowing customization of your BMW.
5.3. Popular BimmerCode Modifications (Toyota GR Supra / BMW Z4 G29)
Below are some common modifications using BimmerCode (version 3.6.1) with the OBDLink MX+ adapter. Options in bold are default values.
- Screen Brightness: Adjust screen brightness via iDrive settings. (Main → HeadUnit (HU_NBT_EVO) + [Expert] → 3005 Display_PIP_CONFIG → DIM_VARIANT → OLD)
- Active Sound Design: Disable fake exhaust sound. (Main → Active Sound Design (ASD_01) → Not active)
- Auto Start/Stop Function Memory: Preserve last state of start/stop function. (Main → Engine Control Unit (DME) → Auto Start/Stop Function Memory → Active)
- Start-up Warning Display: Remove warning message at car start. (Main → HeadUnit (HU_NBT_EVO) → Warning at start-up → Not active)
- Rear View Camera Warning: Remove warning message when in reverse. (Main → HeadUnit (HU_NBT_EVO) → Camera Warning → Not active)
- Seat Belt Reminder: Disable driver and passenger seat belt reminders. (Main → Advanced Crash Safety Module (ACSM_5) → Seat belt reminder driver seat → Not Active / passenger seat → Not Active)
- Window Lifter Interruption: Enable window control when door is open. (Main → Body Domain Controller (BDC) → Window lifter interrupt when opening a door → Not Active)
- Video in Motion and Video via USB: Enable video playback on iDrive screen. (Main → HeadUnit (HU_NBT_EVO) → Video in motion → Active / Video via USB → Active / Additional video codecs and formats → Active). Note: Currently works with Android phones, not iPhones.
- Display Full Text Messages: Enable full phone text messages on iDrive screen. (Main → HeadUnit (HU_NBT_EVO) → Display full text messages → Active)
- Speedometer Display Correct Speed: Display actual speed on instrument cluster. (Main → Instrument Cluster (DKOMBI2) + [Expert] → 3000 ANZENGE_KONFIGURATION → BC_V_KORREKTUR → ohne_korrecktur)
- Mirrors Tilt: Change mirror tilt when in reverse (e.g., 30%). (Main → Body Domain Controller (BDC) → Automatic Mirror Tilt value → 30%). Ensure mirror auto curb monitor switch is ON.
- Maximum Volume for Radio on Start-up: Set maximum iDrive audio volume. (Main → HeadUnit (HU_NBT_EVO) → Maximum volume at start-up → 30%)
- Start-up Warning Chime Change: Configure iDrive start-up chime sound. (Main → HeadUnit (HU_NBT_EVO) → Warning Chime → BMW Warning Chime)
- Rearview Camera Zoom: Add rearview zoom option on iDrive screen. (Main → HeadUnit (HU_NBT_EVO) → Rearview camera zoom → Active)
- Driving Mode: Change start-up default driving mode to Sports mode. (Main → Body Domain Controller (BDC) → Default Driving Mode → Sport Individual)
- Startup Seatbelt Reminder: Remove seat belt reminder when starting the car. (Main → Advanced Crash Safety Module (ACSM_5) → Initial seat belt reminder after start → Not Active)
5.4. Free OBDLink App Features
The free OBDLink app allows you to monitor live parameters, perform diagnostics, and clear check-engine lights.
Image: The free OBDLink app provides live data, diagnostics, and the ability to clear check-engine lights.
5.5. Rock-Solid Connection
The OBDLink CX ensures a stable connection, preventing data corruption and protecting your ECU during coding operations.
Image: Rock-solid connection for stable, safe, and optimized coding.
5.6. Product Video
Video: An overview of the OBDLink CX adapter, demonstrating its features and compatibility with BimmerCode.
6. Troubleshooting
6.1. After Coding Issues
- Car Errors: After coding, the car may display errors. These are usually temporary and will disappear after turning the ignition off and on again.
- Configuration Verification: Restart the car and verify the configuration changes.
- iDrive Settings: Depending on the electronic control unit, you may need to reset the time and restore user-defined settings through the car's iDrive interface.
- Instrument Cluster Reset: Coding the instrument cluster may reset average consumption and display unusual remaining range or outside temperature values. These will normalize after some driving cycles.
6.2. Coding Failure
If an error occurs during coding, follow these steps:
- Close the connection, restart the iOS device and the adapter (disconnect and reconnect).
- Open BimmerCode and connect as described in the setup guide. Follow instructions carefully to prevent external interference.
- Select the specific control unit (marked with a red dot).
- Restore coding data using a backup (see Backups section below).
- If coding fails continuously, contact support via the "Support request" option in the app settings.
7. Backups and Restoration
7.1. Backups
Every time coding data is read from an electronic control unit, a backup is automatically created to allow restoration of original data or recovery from errors.
7.2. Exporting Backups
To ensure access to your backups after changing your iOS device, save them regularly. Backups will be lost if you delete the app from your device. Export and save them before deleting the app.
Using iTunes to share files between your computer and your iOS or iPadOS device:
- Open iTunes on your Mac or PC.
- Connect your iPhone, iPad, or iPod touch to your computer using the USB cable.
- Click your device in iTunes.
- In the left sidebar, click File Sharing.
- Select an app to see which files are available for sharing.
Copy files from your computer to your iOS or iPadOS app:
- In iTunes, select the app from the list in the File Sharing section.
- Drag and drop files from a folder or window onto the Documents list to copy them to your device. Alternatively, click Add in the Documents list, find the files, and click Add.
Copy files from an iOS or iPadOS app to your computer:
- In iTunes, select the app from the list in the File Sharing section.
- Drag and drop files from the Documents list to a folder or window on your computer. Alternatively, select the files, click "Save", and choose a folder on your computer.
Delete a shared file from your iOS device:
- Open iTunes on your Mac or PC.
- Connect your iPhone, iPad, or iPod touch to your computer.
- Select your device in iTunes.
- Select the app from the list in the File Sharing section.
- Select the file you want to delete in the Documents list, then press the Delete key on your keyboard.
- When iTunes asks you to confirm, click Delete.
7.3. Restoring
- Connect to the car as described in the setup guide.
- Select an electronic control unit from the list.
- Tap [Backups] and select a backup image from the list (sorted ascending by creation date).
- To restore original coding data, select the oldest backup.
- To revert the last change, select the newest backup.
- Tap [Done].
- Tap [Code] to start the coding process.
8. User Tips
- The OBDLink CX is primarily designed for BMW vehicles and BimmerCode. While it may work with other OBD-II compliant cars and some third-party apps (like BimmerLink, ActiveOBD), its full functionality and optimization are for BMW/BimmerCode.
- It is not compatible with BMW motorcycles or Japanese motorcycles.
- Always ensure your OBDLink app and BimmerCode app are updated to the latest versions for optimal performance and compatibility.
- When performing coding, ensure your car battery is sufficiently charged or connected to a charger to prevent interruptions.
9. Frequently Asked Questions (FAQ)
Q: Does the OBDLink CX work with other programs besides BimmerCode?
A: Yes, it is known to work with other programs such as BimmerLink, ActiveOBD, and OBDLink's own free app for diagnostics and monitoring.
Q: Can I use this device with cars other than BMW?
A: The OBDLink CX is specifically designed and optimized for BimmerCode, which targets BMW vehicles. While it is an OBD-II compliant device and may read basic data from other cars, its advanced coding features are primarily for BMW.
Q: Is the OBDLink CX compatible with BMW motorcycles or other motorcycle brands?
A: No, the OBDLink CX is designed for automotive use and is not compatible with BMW motorcycles or other motorcycle brands.
10. Warranty and Support
All OBDLink products are designed in the U.S.A by OBDLink and come with a 3-year warranty.
For technical support or warranty claims, please refer to the contact information provided in your Quick Start Guide or visit the official OBDLink website.