1. Introduction
The Lufi X1 Revolution OBD2 Smart Digital Multi Meter Gauge is an advanced vehicle monitoring device designed to provide real-time data from your car's Engine Control Unit (ECU). This versatile gauge offers a wide range of functions including displaying critical engine parameters, alarm notifications, performance testing, and diagnostic capabilities. It is compatible with most gasoline cars equipped with a standard OBD-II protocol.
The Lufi X1 enhances your driving experience by providing immediate access to vital vehicle information, helping you maintain optimal performance and quickly identify potential issues.
2. Package Contents
Please verify that all the following items are included in your package:
- Lufi X1 Meter (Main Unit)
- OBD2 Power Cord
- Bracket
- Screw
- M4 Wrench
- Foam Double-Sided Adhesive
- Instructions Manual

The image above shows the Lufi X1 meter, OBD cable, mounting bracket, screw, wrench, foam adhesive, and the instruction manual.
3. Specifications
3.1 General Specifications
- Placement on Vehicle: In front of the driver's seat
- Country/Region of Manufacture: Mainland China
- Interchange Part Number: LUFI X1
- Manufacturer Part Number: X1
- Material: Plastic + LED
- Item Weight: 0.4kg
- Item Length: 100mm
- Item Width: 100mm
- Item Height: 50mm
- Special Features: Troubleshooting
3.2 Electrical Parameters
- Working Voltage: 8-18V
- Working Current: ≤140mA
- Dormancy Current: ≤1mA
- Working Temperature: -40~85°C
- Processor: STM32 / gd32 high performance dual core processor
- Screen: 2.8" true color TFT screen
- Display Resolution: 240 * 400
- Alarm Buzzer: Can be turned off

The image above details the physical dimensions of the Lufi X1 gauge and its interface ports: IND (Indicator), POWER, and METER (60mm instrument communication interface, reserved).

This image provides an overview of the Lufi X1's features, including its 10 customizable sequence status lights, light sensor for auto-dimming, four function buttons, and a summary of its electrical parameters.
4. Setup
The Lufi X1 gauge features a simple plug-and-play installation process. No additional wiring is typically required.
4.1 Installation Steps
- Locate the OBD-II Port: Find your car's OBD-II port. This port is usually located under the dashboard on the driver's side, but its exact position can vary by vehicle model. Refer to your vehicle's manual if you have difficulty locating it.
- Connect the OBD2 Cable: Plug the included OBD2 power cord into your car's OBD-II port and then into the Lufi X1 meter.
- Mount the Gauge: Use the provided bracket, screw, and foam double-sided adhesive to securely mount the Lufi X1 gauge in a suitable position on your dashboard. Ensure it does not obstruct your view or interfere with driving controls.
- Power On: Once connected, turn on your car's engine. The Lufi X1 display will automatically start up.

The image illustrates the OBD2 cable and common locations for the OBD-II port within a vehicle's interior.
5. Operating Instructions
The Lufi X1 provides a variety of display modes and customizable options to suit your preferences.
5.1 Basic Functions
- Unit Switching: Easily switch between units such as MPH / PSI / °F, etc.
- Alarm and Reminder: Set alarms for voltage, water temperature, speed, gear, and time.
- Fuel Consumption: View instantaneous and average fuel consumption.
- Fault Codes: Read and clear engine fault codes.
- Performance Test: Conduct performance tests for 0-100, 0-200, and 0-400 meters.
- Data Record: View maximum records for various data points.
- System Update: The instrument system can be updated to ensure optimal performance and new features.
5.2 Display Modes and Interfaces
The Lufi X1 supports multiple display modes and customizable interfaces:
- Positive Mode: Standard upright display.
- Backward Looking Mode: Inverted display, useful for certain mounting positions.
- HUD Mode: Head-Up Display mode, best used with a reflective film for night driving.

Use the four function buttons located at the bottom of the gauge to navigate through different display interfaces. You can switch between 'Street pattern', 'Custom mode 1', and 'Custom mode 2', each offering a unique layout of data.

The Lufi X1 features a light sensor for intelligent backlight adjustment, ensuring readability in various lighting conditions.
5.3 ECU Data Monitoring
The Lufi X1 can read up to 36 kinds of data from your vehicle's ECU. Some functions are applicable only to special models.

The table above provides a comprehensive list of parameters the Lufi X1 can monitor, including:
- Speed: Average and instantaneous speed
- Engine: Tacho/RPM, Engine oil pressure (OTL P.), Engine fuel pressure (FUEL P.), Engine oil temperature (OIL T.), Engine water temperature (WATER T.), Exhaust pipe temperature (EXT T.), Engine run time (ENGINE RUN T.), Engine absolute load value (ENGINE LOAD), Ignition advance angle (IGNITION T.)
- Fuel: Instantaneous fuel consumption (FUEL C.), Average fuel consumption (FUEL C.AVG), Fuel quantity (FUEL LEVEL), Short term fuel correction (SHORT TRIM), Long term fuel correction (LONG TRIM), Air-fuel ratio (AIR/FUEL)
- Air: Air flow of air flow sensor (AIR FLOW), Intake air temperature (INTAKE AIR T.), Atmospheric pressure value (BARO), Turbo/Intake pressure (TURBO/IN-MF.P.)
- Sensors & Electrical: Battery voltage (VOLT), O2 B1 S1/S2/S3 Oxygen sensor voltage, Throttle relative position (THROTTLE P., ACC P.B, ACC P.C, ACC P.D, ACC P.E, ACC P.F)
- Other: Clock time (COLOCK TIME), Rail pressure (COMMON R.P), Exhaust gas correction instruction, Outside temperature (OUTSIDE T.)
5.4 Special Vehicle Model Systems
The Lufi X1 includes special system support for certain vehicle brands:
- Honda: Supports water temperature data display for older and newer models (18 years later), and CVT transmission oil temperature. Auxiliary locking device functions (speed, gear locking, door opening, emergency brake flashing light, door opening prompt) can be optionally turned off.
- Honda Turbo Models: For accurate data, the system setting for Turbine / intake pressure calibration should be adjusted to 133%.
- Volkswagen (after 2003): Supports reading turbine and oil temperature data.
- Toyota: Supports reading oil pressure and turbine data.
- Mazda: Supports door opening prompt (each door can be opened separately), CX series, and ATZ series oil temperature display.
For special versions, after receiving the instrument, navigate to the system settings, then the 'special system selection menu', and select the required programs to upgrade.
Video 5.1: Lufi X1 Gauge in operation, displaying real-time vehicle data.
This video demonstrates the Lufi X1 gauge actively displaying various parameters like RPM, air/fuel ratio, water temperature, intake air temperature, turbo/manifold pressure, and clock, as the car's engine revs.
6. Customization
The Lufi X1 offers extensive customization options to personalize your display.
- DIY Page Combination: Create your own custom display pages by combining different data parameters.
- Dashboard Content Customization: Adjust the color of the instrument name, digital values, and units. Over 240 colors are available for selection.
- Sequence Status Lights: The gauge features 10 sequence status lights with customizable colors.

The image illustrates how you can personalize the display by changing the colors of the title, numbers, and units on the Lufi X1 dashboard.
7. Troubleshooting
This section provides guidance for common issues you might encounter.
7.1 General Troubleshooting
- No Power/Display: Ensure the OBD2 cable is securely connected to both the vehicle's OBD-II port and the Lufi X1 meter. Verify that the vehicle's engine is running.
- Inaccurate Data: If data appears inaccurate, especially for specific vehicle models, check for special calibration requirements (e.g., Honda turbo models).
- Engine Fault Codes: The Lufi X1 can read and clear engine fault codes. If a 'Check Engine' light appears, use the gauge to identify the code and then clear it after addressing the underlying issue.
7.2 Specific Model Adjustments
- Honda Turbo Models: If you own a Honda turbo model and experience inaccurate turbine/intake pressure readings, navigate to the system settings and adjust the 'Turbine / intake pressure calibration' to 133%.
If you encounter persistent issues or have questions regarding compatibility with your specific vehicle, it is recommended to consult the online customer service for assistance.
8. User Tips
Here are some helpful tips from other users and common inquiries:
- Compatibility Check: Always verify compatibility with your specific vehicle model and year before purchase. While the Lufi X1 supports most gasoline cars with standard OBD-II protocol, some older or less common models might have specific requirements. If unsure, contact customer service with your car's make, model, and year.
- Honda Turbo Calibration: For Honda turbo models, remember to adjust the 'Turbine / intake pressure calibration' to 133% in the system settings to ensure accurate readings.
- Optimal Placement: When mounting the gauge, ensure it is placed in a position that does not obstruct your view of the road or interfere with any vehicle controls. The 'Positive mode' is generally suitable for direct viewing, while 'HUD mode' with a reflective film can be beneficial for night driving.
- Customization for Clarity: Take advantage of the customizable dashboard content and colors to create a display that is most readable and informative for you.
9. Warranty and Support
For any technical support, troubleshooting assistance, or inquiries regarding product functionality, please contact the seller's customer service. The Lufi X1 system is designed to be updateable, ensuring ongoing support and potential feature enhancements.
10. Safety Information
Please observe the following safety guidelines:
- Ensure the gauge is securely mounted and does not obstruct your view of the road or any vehicle controls.
- Do not attempt to disassemble or modify the device, as this may void any potential warranty and could lead to damage or malfunction.
- Operate the device within its specified working temperature range of -40°C to 85°C.
- Always prioritize safe driving. Do not operate the gauge's settings or functions while driving if it distracts you from the road.