1. Introduction
This manual provides detailed instructions for the KKmoon 6.4-inch 3-in-1 Digital Projection Alarm Clock. This versatile device combines a projection alarm clock, FM radio, and phone charger, making it an ideal addition to any bedroom, living room, baby room, or office. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.
2. Safety Information
- WARNING: DO NOT IMMERSE IN WATER!
- Keep the device away from extreme temperatures and direct sunlight.
- Do not attempt to disassemble or modify the device.
- Use only the provided USB cable for power.
3. Package Contents
Please check the package for the following items:
- 1 x Digital Projection Alarm Clock
- 1 x USB Cable
- 1 x User Manual (this document)

4. Product Overview
Familiarize yourself with the components and controls of your projection alarm clock.



5. Setup
- Power Connection: Connect the provided USB cable to the 'Input Interface' port on the back of the alarm clock and plug the other end into a suitable USB power adapter (not included) or USB port.
- Memory Battery Installation: For memory function (to save settings during power outages), install a CR2032 button battery into the battery compartment on the back of the unit. Ensure correct polarity.
6. Operating Instructions
6.1. Time Setting
Press the 'TIME SET' button to enter time setting mode. Use the 'UP' and 'DOWN' buttons (often integrated with other functions, refer to Figure 4) to adjust the hour and minute. Press 'TIME SET' again to confirm each setting. You can select between 12H and 24H time formats.
6.2. Alarm Setting
The clock supports two independent alarms (Alarm 1 and Alarm 2) to meet both weekday and weekend needs.
- Press the 'ALARM SET' button to select Alarm 1 or Alarm 2.
- Use the 'UP' and 'DOWN' buttons to set the desired alarm time.
- Press 'ALARM SET' again to confirm.
- To activate/deactivate an alarm, press the corresponding 'ALARM 1 ON/OFF' or 'ALARM 2 ON/OFF' button.

6.3. Snooze Function
When an alarm sounds, press the 'SNOOZE' button to temporarily silence the alarm. The default snooze duration is 5 minutes, which can be set between 5-60 minutes. To adjust the snooze time, refer to the full user manual (PDF) for specific steps.
6.4. Projection Function
The clock features a 180-degree rotatable projector and a 90-degree adjustable blue time projection.
- To activate/deactivate the projection, press the 'ALARM 1/2 PROJECTION ON/OFF' button.
- Adjust the projection angle using the 'Time Projection Direction Adjuster' on the back (refer to Figure 3).
- The projection brightness can be set to 3 levels.

6.5. FM Radio Operation
- Firstly, press the 'RADIO ON' button to turn on the FM radio.
- Manual Tuning: Short press the 'UP' or 'DOWN' buttons to manually tune to radio stations.
- Automatic Search: Long press the 'UP' or 'DOWN' buttons to automatically search for and save radio stations.
- Adjust the volume using the dedicated volume controls (refer to Figure 4).

6.6. Display Dimming
The LED digital display features stepless dimming. Use the 'Screen Dimmer' rotary knob on the back of the unit (refer to Figure 3) to adjust the display brightness to your preference.
6.7. USB Charging
The alarm clock is equipped with dual USB output ports, allowing you to conveniently charge your mobile phone or other electronic devices.

7. Maintenance
- Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the device is unplugged before cleaning.
- Avoid blocking the ventilation holes on the back of the unit.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is off | No power connection or power outage. | Ensure the USB cable is securely connected and the power source is active. |
| Alarm does not sound | Alarm is not activated or volume is too low. | Check if the alarm is turned ON (ALARM 1 ON/OFF or ALARM 2 ON/OFF). Increase alarm volume. |
| Projection is dim or unclear | Incorrect brightness setting or focus. | Adjust the projection brightness. Ensure the projection surface is clear. |
| FM Radio static or no signal | Poor antenna position or weak signal. | Extend and reposition the radio antenna for better reception. Try auto-scanning for stations. |
| USB charging not working | Device not properly connected or power issue. | Ensure the device is correctly plugged into the USB port. Check the power supply to the clock. |
9. Specifications
| Feature | Detail |
|---|---|
| Product Type | Digital Projection Alarm Clock |
| Model Number | TT-E16743 |
| Brand | KKmoon |
| Material | Plastic |
| Shell Color | Black |
| Screen Type | LED |
| Display Size | 6.4-inch |
| Motivity Type | Digital |
| Functions | Projection, FM Radio, Phone Charger |
| Projection Features | 180° Rotatable, 90° Adjustable Blue Time Projection, 3 Brightness Levels |
| Display Brightness | Stepless Dimming (via rotary knob) |
| Time Format | 12H/24H Selectable |
| Alarms | Dual Alarms |
| Snooze Function | 5min default, 5-60min settable |
| FM Radio | Supported (Manual/Auto Tuning, Adjustable Volume) |
| USB Output | Dual USB Ports for Charging |
| Memory Function | Built-in CR2032 Button Battery |
| Battery Included | Yes (CR2032) |
| Smart Device | No |
| Item Weight | 204g / 7.18oz |
| Item Dimensions (L*W*H) | 19.2 * 8.2 * 2.8cm / 7.56 * 3.23 * 1.10in |
| Package Weight | 307g / 10.83oz |
| Package Dimensions (L*W*H) | 27 * 10.2 * 4cm / 10.63 * 4.02 * 1.57in |

10. User Tips
- The built-in CR2032 button battery is crucial for retaining your time and alarm settings during power outages. Ensure it is installed correctly and replaced when necessary to maintain this memory function.
- Experiment with the 180-degree rotatable projector and 90-degree direction adjuster to find the optimal projection angle and position on your wall or ceiling.
- Utilize the stepless dimming feature for the main display to achieve comfortable brightness levels for both day and night viewing.
11. Warranty & Support
This product comes with a 1-year guarantee. If your purchase does not meet merchantable quality, fitness for purpose, or match the description, please contact the manufacturer or seller for assistance.
For more detailed information and comprehensive instructions, please refer to the full user manual available in PDF format: View User Manual (PDF).
Manufacturer: Shanghai Mengchu Trading Co., Ltd
Email: b177sumuitn2852@163.com
Telephone: 86-15076659252