Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of various Carrera Digital 124/132 slot car track parts. These components are designed to enhance your racing experience by adding advanced features and track configurations. Please read this manual thoroughly before setting up and using your Carrera track parts to ensure proper function and safety.
Safety Information
- Always ensure all electrical connections are secure and correctly made before powering on the system.
- Keep small parts away from young children to prevent choking hazards.
- Use only the specified power adapters and transformers for your Carrera system.
- Do not expose electronic components to water or excessive moisture.
- Regularly inspect track sections and connections for damage. Replace any damaged parts immediately.
- ☢ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Package Contents
The contents of your package will vary depending on the specific Carrera Digital track parts purchased. Below are common components and their typical inclusions:
- 10109 Wireless Set Duo Digital 132/124: Includes wireless speed controllers and a connecting track with charging cradles.
- 30326 Digital 132 Transformer EU: Power supply unit (14.8 V - 51.8 VA). Note: Specific item numbers (e.g., 30328 for CH, 30329 for UK, 30327 for USA) indicate regional compatibility.
- 30347 Double Lane Change Section: Track section allowing cars to switch lanes.
- 30352 Control Unit: Central control module for track functions.
- 30356 Pit Lane: Track section for pit stops and refueling simulations.
- 30357 Position Tower: Digital display for lap and position indicators. Requires Control Unit (30352) for operation.
- 10115 Wireless Set Evolution: Includes 2x Wireless+ Evolution speed controllers, 1x Wireless+ Evolution connecting track with charging cradles, 1x end section for outer edge of corner (left and right), and a lithium polymer rechargeable battery.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | Carrera |
| Material | Plastic (ABS) |
| Type | Assembly |
| Scale | 1:24 |
| Features | Diecast |
| Certification | CE |
| Battery Type | Lithium Battery (for wireless controllers) |
| Origin | Mainland China |
| Recommended Age | 7-12 Years, 18+ |
Setup Instructions
Follow these general steps for setting up your Carrera Digital track parts. Refer to the specific product packaging for detailed diagrams.
- Track Assembly:
- Connect track sections firmly, ensuring a flat and stable surface.
- Integrate special sections like the 30347 Double Lane Change Section and 30356 Pit Lane into your desired track layout. Ensure these sections are correctly oriented for intended functionality.
- Control Unit (30352) Setup:
- Place the 30352 Control Unit within your track layout, typically near the start/finish line.
- Connect the appropriate 30326 Digital 132 Transformer (or regional equivalent) to the Control Unit.
- Ensure the Control Unit is powered on and indicators are active.

Image: Carrera 30352 Control Unit. This unit is essential for managing digital track functions. - Wireless Controller Setup (10109 Wireless Set Duo / 10115 Wireless Set Evolution):
- Connect the Wireless+ connecting track (included in the wireless sets) to your main track system.
- Place the wireless speed controllers into their charging cradles on the connecting track to ensure they are charged.
- Pair the wireless controllers with the Control Unit according to the instructions provided with your specific wireless set. This usually involves pressing a pairing button on both the controller and the Control Unit.

Image: Carrera 10109 Wireless Set Duo, showing controllers and connecting track. 
Image: Carrera 10115 Wireless Set Evolution, including controllers and charging track. - Position Tower (30357) Installation:
- Connect the 30357 Position Tower to the Control Unit (30352) using the Adapter Unit.
- Ensure the tower is securely placed on the trackside.

Image: Carrera 30357 Position Tower. This tower displays lap and position information via LED. - Pit Lane (30356) Integration:
- Integrate the 30356 Pit Lane into your track layout. This section allows for strategic pit stops during races.
- Ensure proper connection to the main track for seamless car entry and exit.

Image: Carrera 30356 Pit Lane. This track section enables pit stop functionality. - Double Lane Change Section (30347) Placement:
- Place the 30347 Double Lane Change Section where you desire lane switching functionality.
- Ensure it is connected correctly to allow cars to change lanes smoothly.

Image: Carrera 30347 Double Lane Change Section. Allows cars to switch lanes during a race.
Operating Instructions
- Power On: Once all track sections and components are connected, plug in the transformer and switch on the Control Unit.
- Car Placement: Place your Carrera Digital 124/132 cars onto the track.
- Controller Use:
- Use the wireless speed controllers to accelerate and brake your cars.
- The lane change button on the controller activates the lane change section (30347), allowing your car to switch lanes.
- Pit Lane Functionality: Drive your car into the 30356 Pit Lane to simulate pit stops. The Control Unit manages pit stop duration and fuel levels if configured.
- Position Tower Display: The 30357 Position Tower will automatically display the current lap count and the position of the leading car, providing real-time race information.
Maintenance
- Track Cleaning: Regularly clean the track rails with a soft, lint-free cloth to ensure good electrical contact. Avoid abrasive cleaners.
- Car Maintenance: Keep car tires clean and free of debris. Check and replace guide keels and braids as needed for optimal performance.
- Controller Care: Store wireless controllers in their charging cradles or a safe place when not in use. Keep them dry.
- Storage: When disassembling the track for storage, ensure all components are clean and dry. Store them in their original packaging or a suitable container to prevent damage.
Troubleshooting
- Cars not moving: Check all track connections for tightness. Ensure the power supply is connected and the Control Unit is on. Verify car braids and guide keels are clean and properly seated.
- Wireless controllers not responding: Ensure controllers are charged and properly paired with the Control Unit. Check for any obstructions between the controllers and the track.
- Lane change not working: Confirm the 30347 Double Lane Change Section is correctly installed and connected. Ensure the lane change button on the controller is functioning.
- Position Tower not displaying: Verify the 30357 Position Tower is correctly connected to the 30352 Control Unit. Ensure the Control Unit is powered and functioning.
User Tips
- Verify Package Contents: Upon receiving your Carrera track parts, carefully check the contents against the product description or packaging to ensure all components are present. This is especially important as different sets include different parts.
- Stable Surface: Always assemble your track on a firm, flat, and stable surface to prevent track separation during intense racing.
- Practice Lane Changes: Master the timing for lane changes on the 30347 section to gain a competitive edge.
- Battery Management: For wireless controllers, keep an eye on battery levels and charge them regularly to avoid interruptions during races. The Wireless Set Evolution offers up to eight hours of continuous operation.
Warranty and Support
For warranty information and customer support, please refer to the official Carrera website or contact your retailer. Keep your proof of purchase for any warranty claims.