KKMOON 528TV 6.0Ah/398TV 4.0Ah

Contents

Cordless Electric Screwdriver Instruction Manual

Model: 528TV 6.0Ah/398TV 4.0Ah

Brand: KKMOON

1. Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Cordless Electric Screwdriver. This industrial-grade tool features a brushless motor, delivering up to 200N.m of torque, and offers 3-in-1 functionality for screwing, drilling, and impact hammering. Please read this manual thoroughly before first use and keep it for future reference.

2. Safety Instructions

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury.

  • Wear appropriate personal protective equipment, including safety glasses, hearing protection, and gloves.
  • Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
  • Ensure the battery is fully charged before use and stored safely when not in use.
  • Always secure the workpiece before drilling or driving.
  • Avoid accidental starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.

3. Package Contents

Verify that all items are present and in good condition upon unpacking:

  • 1 x Cordless Drill Driver
  • 2 x Battery (4000mAh or 6000mAh, depending on model)
  • 1 x Power Charger
  • 1 x Auxiliary Handle
  • 1 x Storage Box (color may vary)
Cordless Electric Screwdriver with included accessories: drill, two batteries, charger, auxiliary handle, and red storage case.
Figure 1: Cordless Electric Screwdriver and accessories.

4. Product Features

  • Brushless Motor: High-performance brushless motor for increased efficiency, 10x longer motor life, and 50% more runtime per charge compared to brushed motors.
  • High Torque: Maximum 200N.m (2,655 in-lb) torque for demanding tasks.
  • 23+1 Clutch Settings: Provides precise control for various applications, preventing overtightening or stripping.
  • 2 Variable Speeds: Adjustable speeds (0-450 RPM / 0-1550 RPM) for optimal performance across different materials.
  • 21V Max Battery: Available in 4.0Ah or 6.0Ah capacities, offering extended operation.
  • 1/2-inch All-Metal Keyless Chuck: Durable and stable chuck for maximum accessory compatibility.
  • LED Work Light: Integrated light for improved visibility in dark or enclosed spaces.
  • Ergonomic Design: Soft rubber handle for comfortable grip and reduced fatigue during prolonged use.
  • 3-in-1 Working Modes: Easily switch between Screwdriver, Flat Drill, and Impact Hammer functions.
Diagram comparing brushless motor to brushed motor, highlighting benefits like lower consumption, longer service life, and higher efficiency for the brushless motor.
Figure 2: Brushless Motor advantages.
Diagram illustrating the 3-in-1 functionality of the drill: Hammer Drilling (concrete, cement brick, pavement, flat drilling), Application (screw, metal, ceramic, wood, color steel), and Screw Driving (appliances repair, toy repair, furniture DIY, mechanical installation).
Figure 3: 3-in-1 Working Modes and Applications.

5. Setup

5.1 Battery Installation and Charging

  1. To install the battery, align the battery pack with the base of the drill handle and slide it in until it clicks securely into place.
  2. To remove the battery, press the release button on the battery pack and slide it out.
  3. Connect the power charger to a suitable power outlet.
  4. Connect the battery pack to the charger. The indicator light on the charger will show the charging status.
  5. A full charge typically takes 4-5 hours. Disconnect the battery once fully charged.
A 21V 6.0Ah Li-ion battery and its corresponding charger.
Figure 4: Battery and Charger.

5.2 Chuck Operation (Inserting/Removing Bits)

  1. To open the chuck, rotate the chuck collar counter-clockwise until the jaws are wide enough to insert the bit.
  2. Insert the drill bit or screwdriver bit into the chuck. Ensure the bit is centered and fully seated.
  3. To close the chuck, rotate the chuck collar clockwise until the bit is firmly clamped. Hand-tighten for best grip.
Close-up of a hand inserting a drill bit into the self-locking chuck of the cordless drill.
Figure 5: Self-locking Chuck operation.

5.3 Auxiliary Handle Installation

  1. Locate the mounting point on the front of the drill housing.
  2. Slide the auxiliary handle onto the mounting point.
  3. Rotate the handle clockwise to tighten it securely. Adjust its position for comfortable and stable holding during operation.
Cordless drill with the auxiliary handle attached, providing more stable holding for heavy-duty tasks.
Figure 6: Auxiliary Handle attached to the drill.

6. Operating Instructions

6.1 Power On/Off and Speed Control

  • The tool is powered on by pressing the variable speed trigger. The speed increases with greater pressure on the trigger.
  • Release the trigger to turn off the tool.
  • Use the high/low speed selector switch located on top of the drill. The 'High gear' provides small torque and high speed, suitable for general drilling. The 'Low gear' provides large torque and low speed, ideal for driving screws or heavy-duty drilling.
Diagram showing the variable speed trigger on the drill, indicating that pressing harder increases speed from low to high.
Figure 7: Variable Speed Trigger.

6.2 Torque Adjustment and Mode Selection

  • The drill features a 20+3 torque setting ring. Rotate the ring to select the desired torque level.
  • Torque Settings:
    • 1-3: For locking/unlocking screws.
    • 5-7: For drilling into wood.
    • 9-11: For drilling into ceramic.
    • 13-15: For drilling into wall brick.
    • 16-20: For drilling into metal.
  • The three main modes are: Flat Drill (for wood, ceramic, metal), Screwdriver (for driving screws), and Impact Hammer (for concrete, cement brick, red brick wall). Select the appropriate mode using the mode selector.
Close-up of the drill's 20+3 torque setting dial, showing different torque ranges recommended for screwing, wood, ceramic, wall brick, and metal.
Figure 8: 20+3 Torque Settings.

6.3 Forward and Reverse Operation

  • The forward/reverse switch is located above the trigger. Push it to the left for forward rotation (driving screws, drilling).
  • Push it to the right for reverse rotation (removing screws, backing out bits).
  • Ensure the switch is in the neutral (middle) position when not in use to prevent accidental starting.

6.4 Applications

The drill is versatile for various tasks:

  • Drilling: Suitable for wood, metal, ceramic, and wall brick. Can open up to 100mm holes in wood.
  • Screwdriving: Efficient for electrical equipment disassembly, furniture assembly, and general repair.
  • Impact Hammering: For concrete, cement brick, and red brick wall drilling.
  • Agricultural Planting: Can be used with a ground drill attachment for convenient and efficient planting.
  • Ice Drilling: Capable of penetrating thick ice layers with appropriate attachments.
A cordless drill being used to cut a large diameter hole in a wooden plank, demonstrating its wood drilling capability.
Figure 9: Wood Hole Cutting.
A cordless drill being used to drill into a metal surface, showcasing its metal drilling function.
Figure 10: Drilling Metal.
Video 1: Product demonstration showing setup, impact drilling on concrete and brick, metal drilling, wood drilling, screw driving, agricultural planting, and ice drilling.

7. Maintenance

7.1 Cleaning

  • Regularly clean the ventilation openings of the tool to prevent overheating.
  • Use a soft, damp cloth to wipe down the exterior of the drill. Do not use harsh chemicals or abrasive cleaners.
  • Remove any dust or debris from the chuck jaws.

7.2 Battery Care

  • Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
  • Do not store batteries in a discharged state for extended periods. Charge them periodically if not in use.
  • Avoid dropping or damaging battery packs.

7.3 Storage

  • Store the drill and its accessories in the provided storage box to protect them from dust and damage.
  • Keep the tool out of reach of children.

8. Troubleshooting

  • Tool not turning on: Ensure the battery is fully charged and correctly installed. Check the forward/reverse switch is not in the neutral position.
  • Low power/performance: The battery may be low; recharge it. Ensure the correct speed and torque settings are selected for the task.
  • Bit slipping in chuck: Ensure the chuck is tightened securely. The bit may be worn or incompatible with the chuck size.
  • Overheating: Allow the tool to cool down. Ensure ventilation openings are clear of debris. Avoid continuous heavy-duty use without breaks.

9. Specifications

FeatureSpecification
Brand NameKKMOON
Model Number528TV 6.0Ah/398TV 4.0Ah
Drill TypeRotary Hammer Drill
Rated Voltage21V
Battery Capacity4000mAh / 6000mAh (optional)
Max. Torque200N.m
No-Load Speed0-450-1550 rpm
Chuck Size1/2 inch (13mm) Keyless
Clutch Setting23+1
Weight1358g / 47.9oz (tool only)
Charging Time4-5 hours
No-load Working TimeUp to 10 hours
ApplicationColor steel installation, metal drilling, wood drilling, ceramic drilling, wall drilling, screw driving, agricultural planting, ice drilling.
OriginMainland China
UseHome DIY

10. User Tips

  • For drilling into ice, ensure you use an appropriate ice auger bit and utilize the auxiliary handle for better control and stability. The drill is capable of penetrating thick ice layers.
  • When working with different materials, always start with a lower torque setting and gradually increase it if needed to avoid damaging the material or stripping screws.
  • The battery indicator on the drill provides real-time power status, allowing you to plan your work and avoid unexpected interruptions.

11. Warranty and Support

This product comes with a 12-month manufacturer's limited warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty. Defective items must be reported and returned within the warranty period and in the original packaging, if possible. Please provide your order number and a description of the defect when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.