Navceker ZY-AV8E

Contents

Navceker 4K 120Hz HDMI Switch EARC Audio Extractor User Manual

Model: ZY-AV8E

1. Introduction

Thank you for purchasing this Navceker product. For optimum performance and safety, please read these instructions carefully before connecting, operating, or adjusting this product. Please keep this manual for future reference.

The 18Gbps HDMI ARC/eARC audio extractor supports dedicated HDMI output for extracting audio only. It allows users to utilize an existing AV Receiver to receive 4Kx2K@60Hz, HDCP 2.3 content audio. The product also supports HDMI loop out, as well as 10-bit HDR (High Dynamic Range) pass-through eARC/ARC functionality.

A surge protection device is recommended as this product contains sensitive electrical components that may be damaged by electrical spikes, surges, or lightning strikes. Use of surge protection systems is highly recommended to protect and extend the life of your equipment.

Important Note for eARC/ARC Soundbar Connection:

When using an eARC or ARC soundbar, please connect the HDMI INPUT of the soundbar to the AUDIO ONLY HDMI port of this audio extractor. Do NOT use the HDMI eARC/ARC Input of the soundbar, as this will not yield any audio. This is because the eARC port of a soundbar is designed to connect directly to the HDMI eARC INPUT of an HDMI TV, and cannot have another device placed between the eARC soundbar and the HDMI eARC TV.

2. Package Contents

Verify that all items are included in your package:

  • 1x Navceker 18Gbps HDMI eARC Audio Extractor Splitter
  • 1x 5V/2A DC Power Adapter
  • 1x USB Cable (USB-A to MicroUSB)
  • 1x User Manual
Package contents of the Navceker HDMI Audio Extractor
Figure 1: Package contents including the extractor, power adapter, USB cable, and user manual.

3. Product Overview: Ports and Controls

Familiarize yourself with the device's ports and controls:

Front and back panel diagram of the Navceker HDMI Audio Extractor
Figure 2: Front and back panel layout with labeled ports and controls.
Table 1: Port and Control Functions
No. Name Function Description
1 DC 5V DC5V power supply port. Also functions as a firmware update port.
2 AUDIO ONLY HDMI Audio output port. Connect to an amplifier or speaker.
3 COAXIAL Coaxial audio output supporting LPCM 2.0/5.1, Dolby Digital 2.0/5.1, DTS 2.0/5.1.
4 SPDIF Optical audio output supporting LPCM 2.0/5.1, Dolby Digital 2.0/5.1, DTS 2.0/5.1.
5 HDMI OUTPUT ARC/eARC HDMI output port. Connects to a TV with eARC/ARC function.
6 3.5mm JACK Analog stereo 2.0ch output.
7 eARC/ARC SWITCH Switch to 'ON' for eARC/ARC audio output via AUDIO ONLY port. Switch to 'OFF' for audio extraction from HDMI IN port.
8 HDMI INPUT HDMI signal input port. Connects to an HDMI source device.
9 TV 2.0/5.1/7.1 SWITCH A speed toggle switch to select TV, 2.0, 5.1, or 7.1 audio format.

4. Setup and Connection

Follow these steps to connect your Navceker HDMI Audio Extractor:

  1. Connect your HDMI source device (e.g., Computer, Laptop, DVD/HD Player, Apple TV, Set-top Box, PS4/PS5, XBox, Fire Stick, Camera) to the HDMI INPUT port (8) on the extractor.
  2. Connect your display device (e.g., TV, Monitor, Projector) to the HDMI OUTPUT ARC/eARC port (5) on the extractor using an HDMI cable.
  3. For audio extraction, connect your audio receiver or sound system to the desired audio output port:
    • For 7.1CH Dolby Atmos, connect to the AUDIO ONLY HDMI port (2).
    • For 5.1CH Dolby Audio, connect to the COAXIAL port (3) or SPDIF port (4).
    • For 2.0 CH Stereo Audio, connect to the 3.5mm JACK port (6).
  4. Connect the provided 5V/2A DC Power Adapter to the DC 5V port (1) on the extractor and plug it into a power outlet.
Connection diagram for input and output devices
Figure 3: General connection diagram for various input and output devices.
Connection diagram for 7.1CH Dolby Atmos audio setup
Figure 4: Example connection for 7.1CH Dolby Atmos audio with gaming consoles and an AV receiver.
Connection diagram for 5.1CH Dolby Audio setup
Figure 5: Example connection for 5.1CH Dolby Audio with gaming consoles and speakers.
Connection diagram for 2.0 CH Stereo Audio setup
Figure 6: Example connection for 2.0 CH Stereo Audio with gaming consoles and speakers.

5. Operation

5.1 Audio Output Modes

The Navceker audio extractor offers four flexible audio settings, selectable via the TV 2.0/5.1/7.1 SWITCH (9) or IR remote control:

  • TV Mode: In this mode, the HDMI output signal is in TV Copy Mode. The output resolution will be based on the EDID displayed on the TV. HDMI Audio Extract output will also extract audio, with 2.0ch audio signal output via the 3.5mm port and SPDIF 5.1ch audio output via the SPDIF port.
  • 2.0CH Mode: The HDMI Audio Extract output signal will be output via the 3.5mm port. The audio format for both HDMI Audio function output and SPDIF port output will be 2.0ch PCM format.
  • 5.1CH Mode: The HDMI Audio Extract output signal will be output via the HDMI Audio Output and SPDIF port. Note: The 3.5mm Audio port does not support 5.1ch. If using 5.1ch Audio format, please disconnect the 3.5mm port.
  • 7.1CH Mode: The audio format is LPCM. The HDMI Audio Extract output signal will be output via the HDMI Audio Output. Note: If the TV or monitor does not support 7.1ch, there will be no audio signal.
Diagram of four audio output options
Figure 7: Four options for audio output and their supported formats.

5.2 eARC/ARC Functionality

To enable eARC/ARC, ensure your display supports this function. Connect an HDMI cable from the HDMI ARC/eARC port on your display to the HDMI OUTPUT ARC/eARC port (5) on the extractor. Then, set the eARC/ARC SWITCH (7) to the 'ON' position. The AUDIO ONLY port (2) will then output the ARC/eARC audio.

Note: If the eARC/ARC function is on and there is no audio on the L/R channel, please kindly set the audio mode to PCM mode in the eARC/ARC setting menu of your TV.

eARC connection diagram for perfect audio fidelity
Figure 8: eARC (Enhanced Audio Return Channel) setup for optimal audio fidelity.

5.3 Switching Modes

The device supports three switching modes for convenience:

  • Automatic Switch: The device can automatically switch to an input when a connected device is turned on.
  • Manual Switch: You can manually switch inputs by pressing the button on the device.
  • IR Remote Control: Use the included IR remote control to switch inputs.

Video 1: Product demonstration showing automatic, manual, and IR remote switching, along with various audio and video features.

6. Specifications

Table 2: Technical Specifications
Feature Detail
HDMI Compliance HDMI 2.0b
HDCP Compliance HDCP 2.3
Video Bandwidth 18Gbps
Video Resolution Up to 4K@60Hz RGB 8:8:8, 4K@120Hz YUV 4:2:0 (for ZY-AV8E, ZY-AV2E models), 1080P/1440P@120Hz
Color Depth 8-bit, 10-bit, 12-bit (1080p@60Hz), 8-bit (4Kx2K@60Hz RGB 8:8:8/YUV 4:4:4)
Color Space RGB 8:8:8, YCbCr 4:4:4/4:2:2/4:2:0
HDR HDR 10
HDMI Audio Formats PCM 2.0, LPCM 5.1/7.1, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS 5.1, DTS-ES 6.1, DTS-HD Master Audio, DTS:X
SPDIF Output LPCM 2.0/5.1, Dolby Digital 2.0/5.1, DTS 2.0/5.1
Coaxial Output LPCM 2.0/5.1, Dolby Digital 2.0/5.1, DTS 2.0/5.1
3.5mm Jack Output Analog stereo 2.0ch
Input Ports 1x HDMI Type A (19-pin female)
Output Ports 1x HDMI Type A (19-pin female), 1x HDMI Audio Only, 1x Toslink, 1x Coaxial, 1x 3.5mm Jack
Housing Aluminum Enclosure
Color Black (ZY-AV8E model)
Dimensions 98mm (W) × 60mm (D) × 29mm (H)
Weight 125g
Power Supply DC5V/1000mA
Power Consumption 1.75W (Max)
Operation Temperature 0°C to 40°C / 32°F to 104°F
Storage Temperature -20°C to 60°C / -4°F to 140°F
Relative Humidity 20-90% RH (no condensation)

7. Troubleshooting

  • No Audio/Video Output: If the switch is not working, try unplugging the power supply and plugging it back in. Ensure all cables are securely connected.
  • eARC/ARC Audio Issues: If eARC/ARC is enabled but no audio is heard on the L/R channel, set the audio mode to PCM in your TV's eARC/ARC settings menu.
  • Delay when Switching Sources: A delay of approximately 5 seconds when changing sources is normal operation and not a malfunction.
  • 3.5mm Audio Output in 5.1CH Mode: The 3.5mm audio port does not support 5.1ch audio. If you are using 5.1ch audio format, please disconnect the 3.5mm port.
  • 7.1CH Audio Output Issues: If your TV or monitor does not support 7.1ch, you will not receive an audio signal in 7.1CH mode.

8. User Tips

  • This product is highly versatile, allowing you to extract HDMI audio and split it into various connections, enhancing compatibility with different devices and systems.
  • Key features include support for HDR, HDMI 2.0 audio extraction, ARC, eARC, and resolutions up to 4K 120Hz.
  • The extractor is compatible with a wide range of devices such as projectors, MP3/MP4 players, televisions, multimedia systems, TV boxes, iPods, cameras, computers, LCDs, Xboxes, and Apple TVs.
  • The device functions as an HDMI audio extractor, offering 3.5mm 2.1CH output and various other connector types like BNC, AUX, and HDMI-Compatible.

9. Warranty and Support

This Navceker HDMI Audio Extractor comes with a one-year free warranty from the date of purchase.

For further assistance or technical support, please refer to the contact information provided with your purchase or visit the official Navceker website.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.