1. Introduction
Thank you for choosing the 9imod DSC35MG or DSC45MG Waterproof Digital Servo. These high-performance, high-voltage coreless servos are designed for demanding RC applications, including cars, trucks, crawlers, boats, and robots. Featuring a robust aluminum case, high-precision steel gears, and dual ball bearings, these servos offer fast response, high torque, and reliable operation even in wet conditions.

Figure 1: 9imod DSC35MG Digital Servo with included 25T metal arm
2. Safety Precautions
- Always ensure the correct voltage is supplied to the servo (6.0V ~ 8.4V). Exceeding this range can damage the servo.
- Avoid applying excessive force to the servo horn or gears, as this can lead to damage.
- Ensure all connections are secure and correctly polarized before powering on.
- Keep the servo away from extreme temperatures and corrosive substances.
- Although waterproof, prolonged submersion or high-pressure water jets are not recommended.
3. Package Contents
The standard package includes the following items:
- 1 x 9imod Digital Servo (DSC35MG or DSC45MG)
- 1 x Servo Accessories (various servo horns, screws, and grommets)

Figure 2: Package Contents
4. Specifications
The 9imod DSC35MG and DSC45MG servos share many characteristics, with key differences in torque and speed. Refer to the table below for detailed specifications:
| Feature | DSC45MG | DSC35MG |
|---|---|---|
| Dead Band Width | 2 usec | 2 usec |
| Gear Material | Metal Gear | Metal Gear |
| Case Material | Aluminum Case | Aluminum Case |
| Control System | PWM Control (1500usec in the central point) | PWM Control (1500usec in the central point) |
| Operation Voltage Range | 6.0V ~ 8.4V | 6.0V ~ 8.4V |
| Operation Temperature Range | -20°C ~ +60°C | -20°C ~ +60°C |
| Circle | >60000 times without load | >60000 times without load |
| Operation Travel | 60° ± 1 | 60° ± 1 |
| Limit Angle | 180° ± 1 | 180° ± 1 |
| Direction | Re-clockwise / Pulse Travel 500→2500 μsec | Re-clockwise / Pulse Travel 500→2500 μsec |
| Driver Type | Mos Drive | Mos Drive |
| Motor Type | Coreless Motor | Coreless Motor |
| Potentiometer Type | Direct Drive | Direct Drive |
| Amplifier Type | Digital Control | Digital Control |
| Dimensions | 40x20x48.6mm | 40x20x48.6mm |
| Weight (without servo horn) | 75g | 75g |
| Standing Torque @6.0V | 35kg-cm (0.12sec/60°) | 30kg-cm (0.09sec/60°) |
| Standing Torque @8.4V | 45kg-cm (0.11sec/60°) | 35kg-cm (0.07sec/60°) |
| Idle Current @6.0V | 350mA | 300mA |
| Idle Current @8.4V | 410mA | 350mA |
| Running Current @6.0V | 3500mA | 3000mA |
| Running Current @8.4V | 4000mA | 3800mA |
| Ball Bearing | 2BB | 2BB |
| Connector Wire Length | 300MMJR Plug | 300MMJR Plug |
| Connector Wire Gauge | 22AWG | 22AWG |

Figure 3: Specification Table for DSC45MG and DSC35MG
Performance Overview

Figure 4: DSC35MG Performance

Figure 5: DSC45MG Performance
Physical Dimensions

Figure 6: Servo Dimensional Drawing

Figure 7: DSC35MG Dimensions
5. Setup and Installation
5.1 Mounting the Servo
- Identify a suitable mounting location in your RC model that provides adequate clearance for the servo and its horn.
- Use the provided screws and grommets to securely mount the servo to the chassis or frame. Ensure the servo is firmly attached to prevent movement during operation.
- Attach the appropriate servo horn to the servo output shaft. The included accessories provide various options.
5.2 Wiring Connections
The servo features a standard 3-pin JR connector. Connect it to your receiver or flight controller as follows:
- Orange/Yellow Wire: Signal (PWM)
- Red Wire: Positive Voltage (6.0V ~ 8.4V)
- Brown/Black Wire: Ground
Ensure the polarity is correct to avoid damage to the servo or receiver.
5.3 Internal Construction
The servo is built with high-quality components for durability and performance:
- Top Cover: Protects internal components.
- Bearing Circle Waterproof Seal: Enhances water resistance.
- Top & Bottom Bearings: Dual ball bearings for smooth operation and reduced friction.
- High Precision Solid Brass Gears: Durable and precise gear train.
- Waterproof Gaskets: Seals the case against water ingress.
- Aviation Aluminum Material: Used for the robust case.
- CNC Aluminum Middle Shell: Provides structural integrity and heat dissipation.

Figure 8: Internal Construction Details (DSC35MG shown)
6. Operating Instructions
6.1 Powering On
Once the servo is correctly mounted and wired, power on your RC system. The servo will typically center itself upon initialization.
6.2 Control
Control the servo's position using your remote control transmitter. The servo operates via PWM control, with a pulse travel range of 500 to 2500 μsec, corresponding to its 180° operational range.
6.3 Waterproof Feature
The servo is designed to be waterproof, making it suitable for use in wet environments. However, it is not intended for prolonged submersion or high-pressure water exposure. After use in wet conditions, it is recommended to dry the servo and its connections.

Figure 9: Waterproof Capability
7. Maintenance
- Regularly inspect the servo for any signs of physical damage, loose screws, or worn gears.
- Keep the servo clean from dirt, dust, and debris. Use a soft, dry cloth for cleaning.
- Check the wiring for fraying or damage. Replace damaged wires immediately.
- Avoid disassembling the servo unless absolutely necessary, as this may compromise its waterproof sealing and warranty.
8. Troubleshooting
8.1 Servo Not Responding
- Check all wiring connections to ensure they are secure and correctly polarized.
- Verify that the power supply voltage is within the specified range (6.0V ~ 8.4V).
- Test the servo with a different receiver or servo tester to rule out issues with the control signal.
- Ensure the servo horn is not obstructed.
8.2 Erratic Movement or Jittering
- Check for interference from other electronic components.
- Ensure the power supply is stable and can provide sufficient current.
- Inspect the gears for any damage or debris.
8.3 Servo Overheating
- Reduce the load on the servo.
- Ensure adequate airflow around the servo for cooling.
- Verify that the operating voltage is not too high.
9. User Tips
- For optimal performance, especially in high-torque applications, ensure your power source (e.g., battery) can deliver the necessary current.
- When installing the servo horn, ensure it is aligned correctly with the desired neutral position before tightening the screw.
- Consider using a servo saver in applications where sudden impacts or excessive force on the servo horn are likely, to protect the servo gears.
10. Frequently Asked Questions (FAQ)
Q: Is this servo capable of 360-degree continuous rotation?
A: No, this servo has a limited angle of 180° ± 1. It is designed for precise positional control within this range, not continuous rotation.
11. Warranty and Support
For any technical assistance or warranty inquiries, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty claims.
Certifications
This product complies with relevant international standards, including:
- RoHS
- FCC
- CE

Figure 10: Product Certifications