Miboxer FUT035Z, FUT036Z, FUT037Z, FUT038Z, FUT039Z, ZB-Box1, ZB-Box2

Contents

Miboxer Zigbee 3.0 LED Strip Controller User Manual

Models: FUT035Z, FUT036Z, FUT037Z, FUT038Z, FUT039Z, ZB-Box1, ZB-Box2

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Miboxer Zigbee 3.0 LED Strip Controller. These controllers are designed for various LED strip types, including Single Color, Dual White, RGB, RGBW, and RGB+CCT, offering versatile lighting control through Zigbee 3.0, 2.4G RF remote, and smartphone app (via a Zigbee gateway).

MiBoxer Zigbee 3.0 Controllers and Gateway

Image: Overview of MiBoxer Zigbee 3.0 LED Strip Controllers and the ZB-Box Gateway.

2. Safety Information

  • Ensure the input voltage (DC12V-24V) matches your LED strip and power supply specifications.
  • Do not exceed the maximum total output current of 12A.
  • Installation should be performed by a qualified professional if you are unsure about electrical wiring.
  • Avoid exposing the device to moisture or extreme temperatures outside the working range (-10~40°C).
  • Disconnect power before making any electrical connections or performing maintenance.

3. Package Contents

Depending on the model purchased, your package may include:

  • Miboxer Zigbee 3.0 LED Strip Controller (FUT035Z+, FUT037Z+, etc.)
  • ZB-Box1 or ZB-Box2 Zigbee 3.0 Gateway (if purchased)
  • User Manual (this document)

4. Specifications

ParameterValue
Model NumbersFUT035Z+, FUT036Z+, FUT037Z+, FUT038Z+, FUT039Z+, ZB-Box1, ZB-Box2
Input VoltageDC12V-24V
Output Current6A/Channel
Total Output Max12A
Working Temperature-10~40°C
Control Distance (Zigbee)100m (open area)
Control Distance (2.4G RF)30m
Connection ModeWireless (Zigbee 3.0, 2.4G RF)
Applicable LightsDual White, Single Color, RGB, RGBW, RGB+CCT LED Strips
Controlled MethodAPP Gateway Controller, Dimmer, Remote Control, Voice Control
MaterialABS
Power SourceDC
Dimensions (L x W x H)74.5mm x 36mm x 17mm (for FUT035Z+/FUT037Z+)

5. Setup

5.1 Wiring Diagrams

Ensure power is disconnected before making any wiring connections. Connect your LED strip and power supply according to the specific controller model and LED strip type.

FUT035Z+ 2-in-1 LED Controller Wiring Diagram

Image: Wiring diagram for FUT035Z+ (2-in-1) controller, supporting Single Color and Color Temperature LED strips.

FUT037Z+ 3-in-1 LED Controller Wiring Diagram

Image: Wiring diagram for FUT037Z+ (3-in-1) controller, supporting RGB, RGBW, and RGB+CCT LED strips.

Refer to the detailed wiring diagrams on the product packaging or the comprehensive infographic for specific terminal connections (V+, V-, R, G, B, W, C, M).

5.2 Initial Pairing

The controllers support both Zigbee 3.0 network pairing and 2.4G RF remote control pairing.

5.2.1 Zigbee Network Pairing (via Zigbee 3.0 Gateway)

  1. Ensure your Zigbee 3.0 gateway (e.g., ZB-Box1, ZB-Box2) is powered on and configured.
  2. Power on the LED strip controller.
  3. Press the "SET" button on the controller 3 times continuously. The LED indicator on the controller will flash to confirm pairing mode.
  4. Initiate the device search/pairing process on your Zigbee 3.0 gateway or compatible app (e.g., Tuya Smart).
  5. Once successfully paired, the LED indicator will stop flashing.

To unpair from the Zigbee network, press the "SET" button on the controller 5 times continuously.

5.2.2 2.4G RF Remote Control Pairing

  1. Ensure your 2.4G RF remote control is ready for pairing.
  2. Power on the LED strip controller.
  3. Within 3 seconds of powering on the controller, press the "SET" button on the controller 3 times. The LED indicator will flash to confirm pairing mode.
  4. On your 2.4G RF remote, select the desired zone and press the "ON" button for that zone.
  5. The LED strip will flash to confirm successful pairing.

To unpair from a 2.4G RF remote, within 3 seconds of powering on the controller, press the "SET" button on the controller 5 times. The LED strip will flash to confirm unpairing.

Dual White LED Controller with Pairing Instructions

Image: Controller showing SET button for pairing/unpairing.

6. Operating Instructions

6.1 App Control (via Zigbee 3.0 Gateway)

To use app control, you need a Miboxer Zigbee 3.0 gateway (ZB-Box1 or ZB-Box2) and the Tuya Smart app installed on your smartphone.

  1. Ensure your controller is paired to the Zigbee 3.0 gateway (refer to section 5.2.1).
  2. Open the Tuya Smart app and add the controller as a device if it hasn't been automatically discovered.
  3. Use the app interface to adjust color, brightness, color temperature, and other settings of your LED strip.
Smartphone App Control Interface

Image: Example of smartphone app interface for color control.

6.2 Remote Control (2.4G RF)

If you have paired a 2.4G RF remote control (refer to section 5.2.2), you can use it to control your LED strip.

  • Use the remote's buttons to turn the lights on/off, adjust brightness, change color, or select modes.
  • Ensure the remote is within the 30m control distance.

6.3 Voice Control

With a Zigbee 3.0 gateway and integration with smart home platforms like Amazon Alexa or Google Assistant, you can control your LED strip using voice commands.

  1. Ensure your controller is paired to the Zigbee 3.0 gateway and linked to your smart home assistant account via the Tuya Smart app.
  2. Use voice commands such as "Alexa, turn on the living room lights" or "Hey Google, set the bedroom lights to blue."

6.4 Timing Functions

The Tuya Smart app allows you to set schedules and timers for your LED strip controller.

  1. In the Tuya Smart app, navigate to the controller's settings.
  2. Set desired ON/OFF times, color changes, or brightness adjustments based on your daily routine.
Timing Setting Feature on Smartphone App

Image: Smartphone app displaying timing schedule settings.

7. Maintenance

  • Keep the controller clean and free from dust. Use a dry, soft cloth for cleaning.
  • Do not use harsh chemicals or abrasive cleaners.
  • Ensure proper ventilation around the controller to prevent overheating.
  • Regularly check wiring connections for any signs of wear or looseness.

8. Troubleshooting

ProblemPossible CauseSolution
LED strip not lighting up.No power, incorrect wiring, faulty LED strip, controller not paired.Check power supply, verify wiring connections, test LED strip directly, ensure controller is paired to gateway/remote.
Controller not responding to app.No Zigbee gateway, controller not paired to gateway, gateway offline, Wi-Fi issue.Ensure Zigbee gateway is present and online. Re-pair controller to gateway. Check home Wi-Fi connection.
Controller not responding to 2.4G RF remote.Remote not paired, remote battery low, out of range.Re-pair remote to controller. Replace remote battery. Ensure remote is within 30m range.
Voice control not working.Not linked to smart assistant, incorrect voice commands, gateway offline.Verify Tuya Smart app is linked to Alexa/Google Assistant. Use correct device names and commands. Check gateway status.

9. User Tips

  • **SmartLife Compatibility**: The Miboxer Zigbee 3.0 controllers are compatible with the Tuya SmartLife app when used with a Zigbee 3.0 gateway. Ensure your gateway is properly configured within the SmartLife ecosystem.
  • For optimal Zigbee performance, ensure your gateway is centrally located and not obstructed by large metal objects.
  • When pairing, keep the controller close to the gateway or remote for the initial setup.

10. Warranty and Support

This product comes with a 2-year warranty from the date of purchase, covering manufacturing defects. For technical support or warranty claims, please contact your retailer or the manufacturer directly.

Please retain your proof of purchase for warranty purposes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.