RiccoDi DJ7025Y-0.6-11, DJ7025Y-0.6-21

Contents

RiccoDi 2-Pin Automotive Connector Instruction Manual

Models: DJ7025Y-0.6-11, DJ7025Y-0.6-21

1. Product Overview

This manual provides instructions for the RiccoDi 2-Pin automotive connectors, designed for various applications including lid switches, hood locks, and ABS speed sensors. These connectors are compatible with a range of vehicle brands such as SUBARU, Toyota, and Honda. They are available as a set with a connector and terminals, or as a pre-wired unit with a 15cm wire.

RiccoDi 2-Pin Automotive Connectors Set
Figure 1: RiccoDi 2-Pin Automotive Connectors Set

2. Package Contents

Depending on the selected option, your package will contain one of the following:

  • 1 x Connector housing
  • 2 x Terminals

OR

  • 1 x Connector with 15cm pre-attached wire
Female 2-Pin Connector with Terminals
Figure 2: Female 2-Pin Connector with Terminals
Male 2-Pin Connector with Terminals
Figure 3: Male 2-Pin Connector with Terminals
Female 2-Pin Connector with Pre-attached Wires
Figure 4: Female 2-Pin Connector with Pre-attached Wires
Male 2-Pin Connector with Pre-attached Wires
Figure 5: Male 2-Pin Connector with Pre-attached Wires

3. Specifications

FeatureDetail
Brand NameRiccoDi
Model NumberDJ7025Y-0.6-11, DJ7025Y-0.6-21
Wireless FunctionalityYes
Battery IncludedNo
EU LVD VoltageLow voltage: Below 50Vac or 75Vdc
Voltage CompatibilityVarious low voltages (e.g., 1V, 2V, 4V, 5V, 12V)
High-Concerned ChemicalNone
OriginMainland China
CertificationCE
GenderMale and Female
ApplicationAutomotive
ColorBlack
Type Series0.6
Position2pin
Product WeightApproximately 0.019 kg
Approximate Package Dimensions (L x W x H)15cm x 15cm x 10cm

4. Installation & Setup

These connectors are designed for automotive electrical systems. Proper installation is crucial for safety and functionality. It is highly recommended that installation be performed by a qualified automotive technician.

For Connectors with Separate Terminals:

  1. Prepare Wires: Carefully strip the insulation from the ends of the wires that will be connected to the terminals. Ensure the stripped length matches the terminal's crimping area.
  2. Crimp Terminals: Using a suitable crimping tool, securely crimp the terminals onto the prepared wire ends. Ensure a strong mechanical and electrical connection.
  3. Insert Terminals into Connector Housing: Observe the correct orientation and insert the crimped terminals into the designated slots within the connector housing until they click into place. Gently pull on the wires to confirm they are locked.
  4. Connect: Align the male and female connector halves and push them together firmly until they latch.

For Connectors with Pre-attached Wires:

  1. Identify Wires: Match the wires of the new connector to the corresponding wires in your vehicle's electrical system. Pay close attention to color coding and function.
  2. Secure Connection: Splice the wires using appropriate automotive-grade connectors (e.g., solder and heat shrink, crimp connectors) ensuring a robust and insulated connection.
  3. Connect: Align the male and female connector halves and push them together firmly until they latch.

Caution: Incorrect wiring can lead to electrical shorts, component damage, or vehicle malfunction. Always consult your vehicle's service manual for specific wiring diagrams and procedures.

5. Maintenance

To ensure the longevity and reliable performance of your automotive connectors, follow these maintenance guidelines:

  • Regular Inspection: Periodically check the connectors for any signs of wear, damage, or corrosion.
  • Keep Clean and Dry: Ensure the connectors remain free from dirt, moisture, and debris. Use a clean, dry cloth to wipe them if necessary. Avoid using harsh chemicals.
  • Secure Connections: Verify that the connectors are always fully seated and latched to prevent intermittent connections.

6. Troubleshooting

If you experience issues with your connector, consider the following troubleshooting steps:

  • No Connection/Intermittent Connection:
    • Ensure the male and female connectors are fully engaged and latched.
    • Check for bent or damaged terminals within the connector.
    • Inspect the wiring for any breaks or loose connections to the terminals.
  • Corrosion:
    • If minor corrosion is present, carefully clean the terminals with a specialized electrical contact cleaner and a small brush.
    • If corrosion is severe, replacement of the connector and/or terminals may be necessary.
  • Component Malfunction (e.g., sensor not reading):
    • Verify that the correct connector type and wiring configuration were used for your specific application.
    • Test the continuity of the wires and terminals using a multimeter.
    • Consult a professional if the issue persists after basic troubleshooting.

7. Company Introduction and Production Process

Yueqing Xinshui Electric Co., Ltd, established in 2016, is an integrated enterprise specializing in product design, development, processing, sales, and service of automotive electrical components. The company operates a production facility covering an area of 1,000 square meters and is strategically located in Shifan Industrial Zone, Yueqing City, Zhejiang, benefiting from convenient transportation links.

Video 1: Company Introduction and Production Process

8. Warranty & Support

For specific warranty details and technical support, please contact the seller directly. General after-sales service may include free returns within 90 days of purchase. For any product-related inquiries or assistance, refer to the contact information provided by your point of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.