1. Introduction
Thank you for choosing the LEHX L6 Pro Android 14 Car Radio Multimedia Video Player. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new device. Please read it thoroughly before use and keep it for future reference.
The LEHX L6 Pro is a high-performance car multimedia player designed for Ford Mondeo 4 (2010-2014) models, featuring an 8-core CPU, 5G connectivity, Android 14 OS, built-in DSP, and support for Carplay and Android Auto.
Video: Demonstration of LEHX L6 Pro features including UI, split screen, DSP, OBD, TPMS, voice control, navigation, YouTube, Play Store, Bluetooth, video playback, and CarPlay.
2. Safety Information
- Do not install the product directly into the car without testing it first. Products may be affected by long journeys.
- Ensure all wiring is correct before powering on the device to prevent damage.
- Avoid excessive volume to prevent noise and potential speaker damage.
- If the reversing camera is not installed, do not connect the REVERSE/BACK cable to any place. Leave it unconnected to prevent malfunction.
- If the CANBUS box and black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off.
- It is recommended that installation be performed by professionals to avoid damage to the car dashboard or the device.
3. Product Overview & Features
The LEHX L6 Pro is an advanced car multimedia player offering a wide range of features for an enhanced driving experience.
Key Features:
- Operating System: Android 14
- CPU: 7862 64BIT 8 Core
- Memory: DDR 4/6GB RAM, ROM 32/64/128GB (depending on variant)
- Display: 10.1 inch QLED 1280*720 Resolution Touch Screen
- Connectivity: 5G WIFI, 4G LTE, Bluetooth 5.3
- Audio: HIFI DSP (Digital Sound Processor)
- Integration: Wireless Carplay + Android AUTO
- Ports: 3*USB ports
- Special Features: Built-in GPS, Mobile Phone integration, MP3 players, Voice Control, DSP, Reversing Input, Split Screen, Support steering wheel control, Support Can-Bus.

Image: Icons representing key features such as Android 14, 4G Internet, Built-in HiFi DSP, Wireless Carplay, Built-in Android Auto, Bluetooth 5.1, Three-split Screen, 8 Core 64 BIT, Voice System (Optional), 1280*720 Resolution, Radio module TDA7708, Map Update Free, USB Port*3, 5G WIFI, and Cooling fan.
4. Package Contents
The package includes the main head unit, frame, and necessary accessories for installation. Specific accessories may vary slightly depending on the series (L6/LQ/L6X/L6 Plus vs. L5 Pro/L6 Pro).

Image: Diagram showing accessories for L6/LQ/L6X/L6 Plus series (Power Cable, RCA Input/Output, Camera Input/BT Ant, USB Cable*2, GPS Antenna, CAN BUS) and L5 Pro/L6 Pro series (Power Cable, RCA Input/Output, Camera Input/BT Ant, L5 Pro USB Cable*2, L6 Pro USB Cable*3, GPS Antenna, CAN BUS, Audio Out, 4G antenna).
5. Installation
5.1 Pre-Installation Notes
Before installing the product, please test the machine to ensure it functions correctly. Due to long transit times, the product may be affected. Do not install it directly into the car without prior testing.
5.2 Rear Interface Description (Wiring)
Refer to the diagram below for the power plug and other connections.

Image: Detailed wiring diagram for the rear interface, showing connections for power, speakers, camera input, audio input/output, subwoofer, microphone, and antenna.
- When the yellow B+ line and the red ACC line both have a 12V positive power, the unit will turn on normally.
- The yellow B+ line maintains power, and the machine has a memory function.
- There are 8 speaker cables. Each cable must not be grounded, shared, or touch other lines, otherwise there will be no sound output, distorted sound, or overheating.
5.3 Reversing Camera Installation Method
Follow these steps to install the reversing camera:
- Connect the yellow cable (1) to the navigation reversing video input socket.
- Connect the red cable (2) to the reverse detection line (BACK or REVERSE) of the navigation adapter.
- Connect cables (3) and (4) together, then connect them to the positive pole of the reverse light power supply.
- Connect the black cable (5) to the body screw (ground) or the negative pole of the reverse light power supply.

Image: Wiring diagram for reversing camera installation, showing connections to the head unit, reverse light, and ground.
Note: If the reversing camera is not installed, do not connect the REVERSE/BACK cable. Leave it unconnected. Otherwise, the machine may not display properly or may automatically enter reverse mode, causing malfunction. If this occurs, disconnect the REVERSE/BACK line as soon as possible.
5.4 CANBUS Connection
The CANBUS connection varies for high-end and low-end car models. Refer to the diagrams below.

Image: CANBUS connection diagrams for high-end and low-end car models.
Attention: If the CANBUS box and black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off.
6. Operating Instructions
6.1 Learning Steering Wheel Controls
To configure steering wheel controls:
- Press and hold a button on your original car's steering wheel.
- Find the corresponding button icon on the head unit's screen.
- Click the icon to change its color, indicating successful learning.
6.2 Apple CarPlay / Android Auto
The LEHX L6 Pro supports both Apple CarPlay and Android Auto for seamless smartphone integration.

Image: Screenshots showing Apple CarPlay and Android Auto interfaces on the LEHX L6 Pro.
Apple CarPlay (Wired & Wireless)
- Wired Connection: Connect your iPhone via USB data cable. The CarPlay interface will launch automatically.
- Wireless Connection: Enable Bluetooth and Wi-Fi on your iPhone, then connect to the head unit's Bluetooth. CarPlay will launch automatically. The signal is transmitted via Wi-Fi, so it works even if Bluetooth is turned off. Disconnecting Wi-Fi will disconnect CarPlay.
Android Auto (Wired & Wireless)
This feature may not be supported in all countries, and Google Play services must be available locally.
- Download and install the "Android Auto" app from Google Play.
- Use an Android 6.0 or higher phone with a valid data cable connection.
- Wired Connection: Connect your Android phone via USB data cable. The Android Auto interface will launch automatically.
- Wireless Connection: Enable Bluetooth and Wi-Fi on your Android phone, then connect to the head unit's Bluetooth. Android Auto will launch automatically. The signal is transmitted via Wi-Fi, so it works even if Bluetooth is turned off. Disconnecting Wi-Fi will disconnect Android Auto.
6.3 Digital Sound Processor (DSP)
The L6 Pro features a built-in HIFI DSP (Rohm32107) with 5.1 channel support, time delay, bass amplifier, and digital signal processing for high-quality audio. Adjust field, surround, bass enhancement, and bass filter settings to customize your sound experience.

Image: Screenshots of the HIFI DSP settings interface, showing field, surround, bass enhancement, and bass filter adjustments.
6.4 Split Screen Functionality
The three-split screen feature allows you to run multiple applications simultaneously, such as navigation, DVR, and music playback.

Image: Examples of split screen usage, including Maps and DVR, Maps and Music, DVR and Music, and Adjustable Button Color settings.
6.5 Voice Control
Control various functions using voice commands for a safer and more convenient driving experience.

Image: Examples of voice commands such as "Close navigator", "Turn off the radio", "Open navigator", "Turn on the radio", "Turn on bluetooth", "Close video", "Home screen", "Open music", "Volume Up", and "Music off".
6.6 Navigation
The device supports various online and offline GPS navigation maps, including Google Maps, Navitel, Yandex, and IGO. Free map updates are available.
6.7 Bluetooth Functionality
With Bluetooth 5.3, you can pair your mobile phone for hands-free calling, access your phonebook, and stream music wirelessly.

Image: Bluetooth 5.1 interface for phone calls and music streaming.
6.8 Radio
The unit features a radio module (TDA7708) and supports DAB+ (optional accessory) for high-quality digital audio broadcasting.

Image: DAB+ Tuner Ready feature with optional DAB+ radio receiver stick.
6.9 Video Playback
The device supports various digital media formats including MP3, MP4, WMA, and JPEG. Video output to external screens (e.g., headrest monitors) requires additional accessories.

Image: Illustration showing video output to rear screens, noting that accessories are required.
6.10 OBD2 & TPMS Support
The device supports OBD2 via Vgate Icar2 Bluetooth for engine diagnostics and TPMS (Tire Pressure Monitoring System) for real-time tire pressure and temperature visualization.

Image: OBD2 Vgate Icar2 Bluetooth support, showing a smartphone app displaying engine data.

Image: TPMS interface displaying tire pressure and temperature for each wheel.
6.11 External SIM Card Slot
The L6 Pro supports the installation of two SIM cards: an integrated SIM card and a SIM card in an external cable.

Image: Close-up of the external dual SIM card socket.
6.12 Boot Logo & Animation
You can customize the boot logo and animation of the device.

Image: Screenshot of the boot logo settings interface, showing options for internal logos, UDISK1, and animation.
To change the boot logo: Go to Configuration > Car Information > General > Boot Logo. Enter password (L6/L6Plus: 8888, L6Pro: 3368) and select your desired logo.
7. Maintenance
- Keep the screen clean using a soft, dry cloth. Avoid abrasive cleaners.
- Ensure all cables are securely connected to prevent intermittent issues.
- If the device is not functioning correctly, try a soft reset by disconnecting the power for a few minutes.
- For any complex issues, it is recommended to seek professional assistance.
8. Troubleshooting
8.1 Cannot boot normally
- Wiring Check: Ensure the "Yellow", "Red", and "Black" wires are correctly connected. Yellow to positive, Red to key control, Black to negative. Incorrect or incomplete connections will prevent booting.
- Original Car Wiring: Do not connect the unit's wiring directly to the original car's wiring by color if they are not standard. This can cause damage.
- Original Car Plug: Do not plug the original car plug directly into the new unit. It may not work or could cause damage.
- Fuse Check: If the 3 wires are connected correctly but it doesn't boot, check the fuse on the yellow line. If the fuse is fine, twist the yellow and red wires together, turn on the key, and press the power button.
- Repeated Fuse Burning: If the fuse burns repeatedly, stop changing it. This indicates a short circuit in the unit's protection circuit. Seek professional repair.
- Final Confirmation: If all checks fail, connect the yellow and red wires to a 12V battery's positive pole and the black wire to the negative pole. If it boots, the car's wiring is faulty. If not, the unit is broken.
8.2 Automatic Shut-down
- Cable Error: If the blue cable (automatic antenna power supply) is connected to the unit's power cable, it will automatically shut down. Correct the wiring.
- Unstable Voltage: Find a 12V-5A power supply and re-test. If it still shuts down automatically, replace the power supply. If the issue persists, the unit is faulty.
8.3 Noise Issues
- Speaker Power: If the original speaker power is too low, noise may occur at high volumes. Avoid setting the volume too high.
- Grounded Speaker Cable: Connect the iron speaker cable directly to the unit's speaker cable.
8.4 Remote Control Not Working
- Test Method: Use your phone's camera to check the remote control's IR light. If the light doesn't illuminate when pressing buttons, replace the battery. If it illuminates, the remote control is functional.
8.5 Settings Not Saved (No Memory)
- Wiring Check: Ensure the yellow and red lines are connected correctly (yellow to positive, red to key control).
- Reversed Wires: If yellow and red are reversed, simply swap their positions.
8.6 Bluetooth Not Working
Turn on the machine, search for its Bluetooth name on your mobile phone, and connect. After connecting, you should be able to make calls and play music via Bluetooth.
8.7 Product Emits Smoke
Replace the FUSE. If the problem persists, the internal circuit is burned. After-sales service is required.
8.8 Sound Cannot Be Adjusted
- Reset the unit or unplug and replug the power cord.
- If the volume knob is broken, it can be replaced.
8.9 Reversing Camera Does Not Display
- Wiring: Check for wrong or missing wiring.
- Camera Fault: If the camera's lamp doesn't light up when correctly wired, the camera is broken and needs replacement.
8.10 USB Devices Cannot Be Played
Format the USB flash disk to FAT32. Re-download one or two songs and try again. If it still doesn't work, replace the USB flash drive.
8.11 FM Does Not Receive Radio Station
- Antenna Connection: Ensure the antenna plug is fully inserted. Check if the antenna is disconnected or the line is broken.
- Station Search: Press the AS button for automatic search, or use the before/after buttons.
- If the above doesn't resolve the issue, unplug the antenna plug and insert a screwdriver or metal strip into the antenna port to test.
8.12 No Sound After Installation
If there is no sound immediately after installation, it's usually a wiring error or a short-circuited original car speaker wire. Check if the speaker cable is short-circuited and connected. Reconnect if necessary. Verify the number of speaker cables; if only 2 are present, you may need to re-route the original car line. One speaker requires 2 cables, so 2 speakers need 4 cables.
8.13 No Sound After A While
Disconnect all speaker cables from the unit (do not remove them). Find an external speaker and connect it to the gray and purple tail lines. Test with any green group. If there's sound, the car's speaker line is short-circuited or the speaker is damaged. If there's no sound, the unit is broken.
9. Specifications
| Attribute | Value |
|---|---|
| Brand Name | LEHX |
| Operating System | Android |
| RAM/ROM | 6G+128G / 1G+32G (Optional) |
| Display Size | 10.1" |
| Resolution | QLED 1280*720 |
| Item Weight | 1.7kg |
| Voltage | 12 V |
| Out Power | 50x4 |
| Special Features | wifi function, Support steering wheel control, Support 4G Network, Support Can-Bus, Built-in GPS, Mobile Phone, MP3 players, Voice Control, dsp, CarPlay, android auto, Reversing Input, Split Screen |
| Digital Media Format | CD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Albanian, Arabic, Azeri, Irish, Estonian, Belarusian, Bulgarian, Icelandic, Polish, Persian, Boolean text (Dutch South Africa), Danish, German, Russian, French, Filipino, Finnish, Georgian, Haitian Creole, Korean, Dutch, Galicia, Catalan, Czech, Croatian, Latin, Latvian, Lithuanian, Romanian, Maltese, Malay, Macedonian, Norwegian, Portuguese, Japanese, Swedish, Serbian, Slovak, Slovenian, Swahili, THAI, Turkish, Welsh, Ukrainian, Hebrew, Greek, Spain's Basque, Spanish, Hungarian, Armenian, Italian, Yiddish, Hindi, Urdu India, Indonesia, English, Vietnamese |
| For Vehicle Brands/Model | Ford |
| Ford Model | Mondeo |
| Certification | CE |
| Material | ABS+ |
| Subwoofer Output | Support |
| AV-OUT | WiFi version support, 4G version not support |
| RCA cable | 7 channels including subwoofer cable |
| Screen display | 2.5D 10.1inch QLED 1280*720 resolution |
| Rear view camera input | Support (Free Gift) |
| Interface | 2*USB RCA Bluetooth |
| Mirror link | Iphone & Android |
| Microphone | Built-in |
| External microphone | Optional |
| GPS Navigation map | Built-in offline map free update (support navitel/Igo) |
| Bluetooth phone book | Support |
| Bluetooth music | Support |
| OS language | Support 46 countries, Russian, Spanish, Portuguese, French, Hebrew.. |
| System | Android |
| Android system gift | Frame bracket*2 |
| Model/brand | For Ford Mondeo 4 (2010-2014) |
| Carplay | Support |
| Android auto | Support |
10. User Tips
- Parking Sensors (Mondeo MK4 2013): If you experience no sound from parking sensors with a similar radio, ensure the CANBUS settings are correctly configured for your vehicle model. Contact customer service for specific CANBUS type settings if needed.
- Installation: It is highly recommended to have the device installed by professionals to avoid any damage to your car's dashboard or the unit itself.
- Pre-shipment Testing: The seller states that all units undergo strict quality tests before leaving the factory. However, it's always a good practice to test the unit before full installation.
11. Warranty & Support
The product comes with a 1-year warranty. For any issues or technical assistance, please contact LEHX customer service. You can also refer to the official user manual PDF for more detailed instructions and diagrams.
User Manual (PDF): A detailed user manual in PDF format is available for download. This document contains comprehensive instructions and diagrams for installation and operation. View User Manual (PDF)
Contact Support: For further assistance, you can contact LEHX customer service via the following channels:
- WhatsApp: Refer to the QR code on the support page.
- TikTok: Refer to the QR code on the support page.
- Instagram: @LEHXCARRADIO or refer to the QR code on the support page.

Image: Main product image of the LEHX L6 Pro Car Radio Multimedia Video Player.