1. Introduction
The Andoer W140 RGB LED Video Light is a versatile and portable lighting solution designed for photography and video shooting. It features high-quality LED beads, adjustable color temperature, a wide range of RGB colors, and various special lighting effects. With its built-in rechargeable battery and multiple mounting options, it provides flexible illumination for diverse creative needs.
2. Package Contents
Please check the package to ensure all items are present:
- 1 x Andoer W140 RGB LED Video Light
- 1 x USB Charging Cable
- 1 x Cold Shoe Adapter
- 1 x User Manual (English)
3. Specifications
| Feature | Specification |
|---|---|
| Brand | Andoer |
| Model | W140 RGB |
| LED Beads | White 49pcs + Yellow 49pcs + RGB 42pcs (Total 140pcs) |
| Color Temperature | 2500K-9000K |
| CRI (Color Rendering Index) | 95+ |
| Maximum Output | 8W |
| Luminous Flux | 1150Lux/0.3 meter |
| Light Angle | 120° |
| Power Supply | Built-in 3.7V 3100mAh lithium battery |
| Charging Time | Approximately 3.5 hours |
| Item Size | 11.5 * 7 * 1.5cm (4.5 * 2.8 * 0.6 inches) |
| Item Weight | 125g (4.4oz) |
| Battery Included | Yes |
| Inbox Adaptor | No |
| Certification | CE, FCC, RoHS |
4. Setup
4.1 Initial Charging
Before first use, fully charge the LED video light using the provided USB charging cable. Connect the Type-C end of the cable to the light's charging port and the other end to a standard USB power source (e.g., computer, wall adapter).
4.2 Mounting the Light
The W140 RGB LED Video Light offers flexible mounting options:
- Camera Hot Shoe: Attach the included cold shoe adapter to the 1/4 inch screw hole on the bottom or side of the light. Then, slide the adapter into your camera's hot shoe mount.
- Tripod/Light Stand: The light features 1/4 inch screw holes on both the bottom and side, allowing direct mounting to tripods, light stands, or other compatible brackets.
- Additional Accessories: The cold shoe mount on the light itself can be used to install a microphone or other compatible devices.
5. Operating Instructions
5.1 Power On/Off
Locate the power button on the side of the light. Press and hold the power button for a few seconds to turn the light on or off.
5.2 Mode Selection and Adjustment
The light features an OLED display and control buttons/dials for adjusting settings. The display shows current mode, brightness, color temperature, HUE, saturation, and battery level.
5.2.1 RGB Colorful Light Mode (HSI)
- In HSI mode, you can adjust the HUE (color) from 0° to 360°.
- Adjust the brightness from 0% to 100% to achieve various colorful lighting effects.
5.2.2 Cold & Warm Bi-color Temperature Mode (CCT)
- In CCT mode, you can adjust the color temperature from 2500K (warm light) to 9000K (cold light).
- Stepless adjustment allows for precise control over warm, cold, or mixed light.
5.2.3 Special Light Effect Modes (SCENE)
- The light supports 20 dynamic scene light effects.
- Examples include: Police car, Ambulance, Fire truck, Lightning, Fireworks, Pulse flash, RGB group flash, Reporter group flash, Emergency double flash, High and low beam bulb, TV, Candle, Party, Broken bulb, White breathing light, Red flash, Green flash, Blue flash, HSI slow, HSI fast.
- Navigate through these effects using the control buttons to select the desired scene.
6. Maintenance
- Keep the device dry. Do not handle with wet hands.
- Clean the light with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Avoid exposing the light to extreme temperatures or direct sunlight for prolonged periods.
- Store the light in a cool, dry place when not in use.
- Do not attempt to disassemble or repair the unit yourself, as this will void the warranty and may cause damage.
7. Troubleshooting
- Light does not turn on: Ensure the battery is charged. Connect the light to a power source using the USB cable and try again.
- Light output is weak: Check the brightness setting on the display and increase it if necessary. Ensure the battery is sufficiently charged.
- Color temperature or RGB mode not working: Verify that you are in the correct mode (CCT for bi-color, HSI for RGB) and adjust the corresponding parameters.
- Device not recognized when charging: Ensure the USB cable is securely connected to both the light and the power source. Try a different USB port or charging adapter.
8. User Tips
- For optimal battery life, avoid fully discharging the battery frequently.
- Experiment with different HUE and saturation levels in RGB mode to achieve unique creative lighting.
- Utilize the special effects modes to add dynamic elements to your video productions or photography.
- When mounting on a camera, ensure the cold shoe adapter is securely tightened to prevent accidental detachment.
9. Warranty and Support
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.
