1. Product Overview
The Andoer W140 RGB LED Video Light is a versatile and portable lighting solution designed for photography, videography, vlogging, and live streaming. It features high brightness, a high Color Rendering Index (CRI), adjustable color temperature, RGB colorful light modes, and various special lighting effects.
Andoer W140 RGB LED Video Light
Product demonstration showcasing various lighting modes and features.
2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 x Andoer W140 RGB LED Video Light
- 1 x USB Type-C Charging Cable
- 1 x Cold Shoe Adapter
- 1 x User Manual (English)
Included items in the package.
3. Setup
3.1 Charging the Device
- Locate the Type-C charging port on the side of the LED video light.
- Connect the provided USB Type-C charging cable to the light and a suitable USB power source (e.g., wall adapter, power bank, computer USB port).
- The LCD display will indicate charging status. A full charge typically takes approximately 3.5 hours.
Built-in 3.7V 3100mAh lithium battery, rechargeable via Type-C port.
3.2 Mounting the Light
The W140 RGB LED Video Light offers multiple mounting options:
- Cold Shoe Mount: Use the integrated cold shoe mount on the top of the light to attach accessories like microphones or other compatible devices.
- 1/4 Inch Screw Holes: The light features 1/4 inch screw holes on the bottom and side.
- Cold Shoe Adapter: Attach the provided cold shoe adapter to a camera's hot shoe or a tripod with a 1/4 inch screw for flexible mounting.
Mounting options for the LED light.
4. Operating Instructions
4.1 Power On/Off
Locate the power button on the device. Press and hold to turn the light on or off.
4.2 Adjusting Brightness
The light offers 0%-100% adjustable brightness. Use the designated control (e.g., a dial or buttons, typically labeled 'DIM' or with arrows) to increase or decrease the light intensity. The current brightness level will be displayed on the LCD screen.
4.3 Color Temperature Adjustment (CCT Mode)
In CCT mode, you can adjust the color temperature from 2500K (warm light) to 9000K (cold light) with stepless adjustment. Use the controls to select your desired color temperature. The LCD display will show the current Kelvin value.
Adjustable color temperature from 2500K to 9000K.
4.4 RGB Colorful Light Mode
The light supports 360° adjustable HUE, allowing you to create various colorful lighting effects. Switch to RGB mode and use the controls to cycle through different colors and adjust their saturation and brightness. The LCD display will show the HUE value.
RGB colorful light mode with 360° HUE adjustment.
Examples of RGB color output.
4.5 Special Light Effect Modes
The W140 RGB offers 20 special lighting effects to enhance your creative projects. Navigate through the menu to select effects such as:
- Ambulance
- Fire Alarm
- Fireworks
- TV
- Candle
- Party
- RGB Strobe
- Lightning
- Pulse Flash
- Reporter Group Flash
- Emergency Double Flash
- High and Low Beam Bulb
- Broken Bulb
- White Breathing Light
- Red Flash
- Green Flash
- Blue Flash
- HSI Slow
- HSI Fast
Visual representation of the 20 dynamic scene light effects.
5. Maintenance
5.1 Cleaning
- Use a soft, dry cloth to clean the exterior of the light.
- For stubborn dirt, slightly dampen the cloth with water and then wipe dry immediately.
- Do not use harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish or internal components.
5.2 Storage
- Store the light in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan. Recharge every 3-6 months.
5.3 Battery Care
- The device has a built-in, non-replaceable lithium battery.
- Avoid fully discharging the battery frequently, as this can reduce its overall lifespan.
- Do not expose the device to temperatures above 60°C (140°F) or below -10°C (14°F).
6. Troubleshooting
- Light not turning on: Ensure the battery is charged. Connect the light to a power source using the Type-C cable and try again.
- Incorrect color or brightness: Check the current mode (CCT, RGB, or Effect) and adjust the parameters accordingly using the controls. Refer to Section 4 for operating instructions.
- Short battery life: Battery life can vary based on brightness and mode. At 100% brightness, the battery typically lasts around 2 hours and 15 minutes. Reduce brightness for longer usage.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Andoer |
| Model | W140RGB |
| Lighting Type | Ring Light |
| LED Beads | White 49pcs + Yellow 49pcs + RGB 42pcs (Total 140pcs) |
| Color Temperature | 2500K-9000K (Bi-color) |
| CRI | 95+ |
| Maximum Output | 8W |
| Luminous Flux | 1150Lux/0.3 meter |
| Light Angle | 120° |
| Power Supply | Built-in 3.7V 3100mAh lithium battery |
| Charging Time | 3.5 hours |
| Item Size | 11.5 * 7 * 1.5 cm (4.5 * 2.8 * 0.6 in) |
| Item Weight | 125g (4.4oz) |
| Package Size | 15 * 13 * 3 cm (5.9 * 5.1 * 1.2 in) |
| Package Weight | 235g (8.3oz) |
| Battery Included | Yes |
| Inbox Adaptor | No |
Compact dimensions of the LED light.
8. User Tips
- The product includes one light panel. The images showing front and back are of the same single panel.
- For optimal battery life, consider using the light at lower brightness settings when possible.
- The cold shoe adapter allows for versatile mounting on cameras or tripods. If you have an MT-08 tripod, it can be easily attached.
Example of a compatible MT-08 Tripod.
9. Warranty and Support
This product comes with a 12-month manufacturer's limited warranty for defective items (excluding items damaged and/or misused after receipt). Accessories typically come with a 3-month warranty. Please retain your proof of purchase for warranty claims.
