Infitary X3

Contents

Infitary Motorcycle TPMS User Manual

Model: X3

1. Introduction

The Infitary Motorcycle TPMS (Tire Pressure Monitoring System) is designed to enhance riding safety by providing real-time monitoring of your motorcycle's tire pressure and temperature. This wireless system features a large, colorful LCD display that clearly shows individual tire data and alerts you to potential issues with color-coded warnings. This manual will guide you through the installation, operation, and maintenance of your new TPMS.

2. Safety Information

  • Ensure all components are securely installed before riding.
  • Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
  • Keep the device away from extreme temperatures and direct sunlight for prolonged periods.
  • The monitor is waterproof and dustproof, but avoid prolonged submersion.
  • Always prioritize road safety. Do not operate or adjust the TPMS while riding.
  • The tire pressure accuracy is 1.45 PSI, with an error of 0.1 BAR.
  • This TPMS is not suitable for BMW motorcycles.

3. Package Contents

Please check the package for the following items:

  • 1 x TPMS Monitor
  • 1 x Monitor Holder
  • 1 x USB Power Line (Charging Cable)
  • 2 x External Sensors (Front and Rear)
  • 2 x Anti-proof Nuts
  • 2 x Battery Keys
  • 1 x Spanner
  • 1 x User Manual
Infitary Motorcycle TPMS package contents including monitor, sensors, holder, USB cable, nuts, and spanner.

Figure 3.1: Overview of included components.

4. Specifications

Monitor Specifications:

FeatureSpecification
Model NameX3
Dimensions (L x W x H)48.4mm x 40mm x 17.8mm
Item Weight0.24kg
Operating Frequency433.92±15MHz
Battery TypeBuilt-in Lithium Battery (USB rechargeable)
Charging TimeApprox. 1 hour for full charge
Voltage12 V
Waterproof RatingIP67
LCD DisplayBig LCD, easy to see, Color Shift for different status
Time DisplayYes
Power ConsumptionLow Level
MaterialABS
ApplicationMotorcycle, Motorbike, Autobike, Electric Scooter

Sensor Specifications:

FeatureSpecification
Sensor Size23mm * 15mm (WF)
Pressure Range0-8Bar / 0-116PSI
Operating Voltage2.1-3.3V
Operating Temperature-40°C to +105°C
Operating Frequency433.92MHz ± 15MHz
Battery TypeCR1632 button battery (replaceable)
Diagram showing monitor dimensions and display parameters: Time Display, Monitor Battery, Tyre Temperature, Tyre Pressure.

Figure 4.1: Monitor dimensions and display parameters.

5. Setup and Installation

5.1 Monitor Installation

The monitor features an adjustable bracket for easy installation on your motorcycle's handlebar. Choose the appropriate silicone inserts based on your handlebar diameter:

  • Install on the right size handlebar to prevent breakage.
  • For 16-22mm handlebars: Use all silicone inserts.
  • For 22-26mm handlebars: Remove the middle silicone insert.
  • For 26-30mm handlebars: Remove all silicone inserts.
Monitor installation on a motorcycle handlebar using the adjustable bracket.

Figure 5.1: Monitor installation on handlebar.

Diagram showing adjustable bracket components and how to use silicone inserts for different handlebar sizes (16-22mm, 22-26mm, 26-30mm).

Figure 5.2: Adjustable bracket details for various handlebar sizes.

5.2 Sensor Installation

The external sensors are designed for easy installation on your tire valves. Ensure you install the "FRONT" sensor on the front tire and the "REAR" sensor on the rear tire.

  1. Screw on the anti-proof nuts onto the tire valve.
  2. Screw the sensor onto the tire valve.
  3. Tighten the anti-proof nuts against the sensor using the provided spanner to secure it.
Diagram showing the steps for installing the external tire pressure sensors.

Figure 5.3: External sensor installation steps.

5.3 Charging the Monitor

The monitor has a built-in lithium battery and is charged via a USB power line. The charging port features an adsorption function for safe and convenient charging. A full charge takes approximately one hour.

Image showing the USB power line and the magnetic charging port on the monitor.

Figure 5.4: USB charging cable and magnetic charging port.

6. Operating Instructions

The monitor displays real-time tire pressure and temperature. The display uses different colors to indicate different items: Yellow for Time, White for Tire Pressure, and Yellow for Tire Temperature. This large color digital display makes information clear at a glance.

Monitor display showing front tire pressure, rear tire pressure, time, battery, front tire temperature, and rear tire temperature.

Figure 6.1: Monitor display showing tire pressure and temperature.

6.1 Basic Operations and Settings (Refer to Video)

For detailed visual instructions on operating the device, including turning it on/off and adjusting various settings, please refer to the official instructional video below. The monitor buttons are waterproof, so apply firm pressure when debugging or setting.

Video 6.1: Comprehensive guide for monitor operation and settings.

6.1.1 Turning On/Off Monitor

  • To Turn On: Press and hold the "-" button until the monitor turns on.
  • To Turn Off: Press and hold the "-" button until the monitor turns off.

6.1.2 Time Setting

  • Press both "-" and "+" buttons simultaneously and hold for 3 seconds to enter time setting mode.
  • When AM/PM is flashing, press "-" to select AM, PM, or 24hr mode (24hr is blank).
  • Press "+" to set hours and minutes.
  • Press "-" to set the value.
  • Press both keys again to save and exit setting.

6.1.3 Temperature Unit Setting

  • Press the "+" button until a beep is heard to enter setting mode.
  • Press the "-" button once to set the unit of temperature (as shown in the video).
  • Press "+" button once, and the temperature unit will flash.
  • Then press "-" button to select the desired unit (°C or °F).
  • Press and hold "+" button for 3 seconds to exit setting.

6.1.4 Pressure Unit Setting

  • Press the "+" button until a beep is heard to enter setting mode.
  • Press the "+" button once, and the unit will flash.
  • Then press "-" button to select the desired unit (BAR or PSI).
  • Press "+" button to save; press and hold "+" button for 3 seconds to exit setting.

6.1.5 Rear Tyre Pressure Alarm Setting

  • Press the "+" button until a beep is heard to enter setting mode.
  • Press the "-" button three times to enter 2P (Rear Pressure) front tyre setting.
  • Press the "+" button once, and the value will flash.
  • Press "-" to set the desired value.
  • Press "+" to save; press "+" for 3 seconds to save and exit.

6.1.6 Front Tyre Pressure Alarm Setting

  • Press the "+" button until a beep is heard to enter setting mode.
  • Press the "-" button twice to enter 1P (Front Pressure) front tyre setting.
  • Press the "+" button once, and the value will flash.
  • Press "-" to set the desired value.
  • Press "+" button to save; press "+" for 3 seconds to save and exit.

6.1.7 High Temperature Alarm Setting

  • Press and hold "+" button until a beep is heard to enter setting mode.
  • Press "-" for four times to enter tyre temperature alarm setting.
  • Press "+" one time and the digit will flash.
  • Press "-" to desired value and press "+" to save.
  • Press and hold "+" for 3 seconds to exit setting.

6.1.8 Tyre Identification

  • Press "+" button 5 times to enter identification mode.
  • Press "-" to select the front tyre or rear tyre. When selected, "--" will flash.
  • Charge or discharge the tyre (external type only need to remove or install it).
  • When the display makes a beep sound, it means the identification is successful.
  • Press "-" to select other tyre and follow the same step as above mentioned.
  • Press and hold "+" button until a beep is heard to save and exit setting.

6.2 Alarm Prompts

The monitor provides visual and audible alarms for various tire conditions. The red part of the display indicates an alarm prompt.

Warning diagram showing high pressure alarm, low voltage alarm, high temperature alarm, and power alarm.

Figure 6.2: Alarm prompts for different conditions.

7. Maintenance

7.1 Sensor Battery Replacement

The external sensors use replaceable CR1632 button batteries. Follow these steps to replace a sensor battery:

  1. Remove the anti-remove washer from the sensor.
  2. Fit the provided tool into the rim of the sensor.
  3. Turn the tool to loosen the sensor case.
  4. Carefully take the core out of the case.
  5. Replace the old CR1632 battery with a new one.
  6. Reassemble the sensor by tightening the anti-remove washer.
Step-by-step diagram for replacing the CR1632 battery in the external sensor.

Figure 7.1: Sensor battery replacement guide.

7.2 General Care

  • The monitor is waterproof (IP67 rated) and dustproof, suitable for various climates.
  • Clean the monitor and sensors with a soft, damp cloth. Avoid harsh chemicals.
  • Ensure the charging port is clean and dry before connecting the USB cable.
Image demonstrating the waterproof capability of the monitor.

Figure 7.2: Monitor is waterproof.

8. Troubleshooting

ProblemPossible CauseSolution
Monitor not turning onLow battery; incorrect button press.Charge the monitor fully. Press and hold the "-" button firmly to turn on.
No tire data displayedMotorcycle speed too low; sensors not triggered; sensors not paired.Ensure motorcycle speed exceeds 15 mph (24 km/h) for data updates. Perform tire identification/pairing as per section 6.1.8.
Incorrect pressure/temperature readingsSensors incorrectly installed; unit settings incorrect.Verify sensors are installed on correct tires (FRONT/REAR). Check pressure and temperature unit settings (BAR/PSI, °C/°F) as per sections 6.1.3 and 6.1.4.
Charging cable/connectors get hotPossible issue with charging circuit or cable.Discontinue use immediately. Contact customer support for assistance.
Difficulty programmingUnfamiliarity with button combinations.Refer to the instructional video (Video 6.1) and specific setting steps in section 6.1. Ensure firm presses on waterproof buttons.
Sensor lost or stolenPhysical loss of a sensor.Contact the seller or manufacturer to inquire about purchasing replacement sensors.

9. User Tips

  • Initial Setup: Take your time during the initial setup, especially with pairing sensors and setting alarm values. Refer to the video guide for visual clarity.
  • Button Operation: The buttons are waterproof and require a firm press. If you're having trouble with settings, ensure you're pressing them with enough force.
  • Data Update: Remember that tire pressure data updates only when the motorcycle's speed exceeds 15 mph (24 km/h) and then every 3 minutes. Don't expect instant updates when stationary.
  • Battery Life: The sensors use replaceable CR1632 batteries. Keep spares on hand for quick replacement.
  • Compatibility: Note that this TPMS is not suitable for BMW motorcycles.
  • Water Exposure: While waterproof, it's always good practice to avoid unnecessary prolonged immersion in water.

10. Warranty and Support

For warranty information, technical support, or to inquire about replacement parts (such as additional sensors or monitor holders), please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.