Introduction
Thank you for choosing the Towild TL02 Smart Bicycle Brake Rear Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new bicycle light. Designed for enhanced safety, the TL02 features intelligent sensing, a rainproof design, and USB rechargeable LED illumination.

Package Contents
Please check the package to ensure all items are present:
- 1 x Color box
- 1 x TL02 Smart Brake Rear Light
- 2 x Bandage (for mounting)
- 1 x USB cable (for charging)
- 3 x Cable ties (for mounting)
- 1 x Non-slip mat

Specifications
Key technical specifications for the Towild TL02 Smart Brake Rear Light:

| Feature | Detail |
|---|---|
| Product Name | TL02 Smart Brake Rear Light |
| Appearance Size | 48mm x 45mm x 38mm |
| Product Weight | 26g |
| Waterproof Rating | IPX7 |
| Intelligent Sensing | Yes (Brake, Light, Vibration) |
| Support Dimmer | 2 - 4 Files |
| Body Material | Plastic |
| Power Supply | Battery (USB Rechargeable) |
| Mounting Placement | Seatpost / Saddle Rail |
| Certifications | CE, FCC, RoHS |
| Origin | Mainland China |
| Modes/Brightness |
|
Setup and Installation
The TL02 offers two primary installation methods: on the saddle rail or on the seat post. No tools are needed for installation.


1. Mount on Saddle
- Take out the TL02 light. Ensure the TOWILD logo faces upwards.
- Place the light on the seat rail, underneath the saddle.
- Use the provided bandages or cable ties to pass through the mounting holes of the taillight base and securely fix it to the seat rail.
2. Mount on Seat Post
- Take out the TL02 light.
- Tear off the small piece of spacer and stick it into the square groove of the taillight base.
- With the TOWILD logo facing upwards, use the rubber ring (bandage) to fix the light on the seat post at a suitable height.
3. Disassembly of TL02
- To remove the light from its base, rotate the TL02 to the left by 90 degrees.
- To re-attach, insert the TL02 into the base and turn it 90 degrees to the right until it locks securely.
Operating Instructions
The TL02 features intuitive controls and smart sensing capabilities.

Basic Operations
- Long press: Turn the light on or off.
- Click (short press): Switch between the three flashing modes (Flashing, Burst, Breathing).
- Double click: Switch between Smart Mode and Manual Mode.
Operating Indicators
- The index light flashes when in Smart Mode.
- Upon power-on, the display shows 4 lights, indicating battery level or status.
- Induction brake highlight: The light will highlight for 2 seconds when braking is detected.
- Manual mode: The light will not enter sleep mode automatically.
Smart Mode Features
- Daytime Detection: No flashing during daytime to conserve battery.
- Auto Sleep: The light will enter sleep mode after 3 minutes of inactivity.
- Wake Up: The light will automatically wake up upon detecting vibration (movement).

Charging
The Towild TL02 is USB rechargeable. Use the provided USB cable to charge the device.
- Connect the small end of the USB cable to the charging port on the TL02.
- Connect the larger end of the USB cable to a standard USB power source (e.g., computer, wall adapter, power bank).
- The light will indicate charging status (e.g., a specific LED color or pattern). Refer to the operating indicators for details.
- Ensure the charging port cover is securely closed after charging to maintain waterproofing.
Maintenance
To ensure the longevity and optimal performance of your TL02 Smart Bicycle Brake Rear Light, follow these maintenance guidelines:
- Cleaning: Wipe the light with a soft, damp cloth to remove dirt and debris. Avoid using harsh chemicals or abrasive materials.
- Waterproofing: The TL02 has an IPX7 waterproof rating, meaning it can withstand rain and splashes. However, ensure the USB charging port cover is always securely sealed when not charging to prevent water ingress.
- Storage: Store the light in a cool, dry place when not in use. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong battery life.
- Battery Care: Avoid fully discharging the battery frequently. Recharge the light regularly, especially if it has been unused for a long time.

Troubleshooting
If you encounter issues with your TL02 light, please refer to the following common troubleshooting steps:
- Light not turning on:
- Ensure the battery is charged. Connect to a USB power source and check if the charging indicator activates.
- Perform a long press on the button to ensure it's not just in sleep mode.
- Light not responding to braking (Smart Mode):
- Ensure the light is in Smart Mode (double-click to switch).
- Check if the light is securely mounted and not vibrating excessively in a way that might interfere with the sensor.
- Light not turning off automatically (Smart Mode):
- Ensure the light is in Smart Mode. In Manual Mode, it will not sleep automatically.
- Verify there is no continuous vibration or movement that might keep the light active.
- Short battery life:
- Ensure the light is fully charged before use.
- Consider using Smart Mode during the day, as it conserves battery by not flashing.
- Operating in higher brightness modes or continuous modes will consume battery faster than flashing modes.
User Tips
- The TL02's intelligent sensing features (brake, light, vibration) are designed to enhance safety and convenience. Utilize Smart Mode for optimal battery life and automatic operation.
- The compact and lightweight design (26g) makes it almost unnoticeable on your bike, contributing to a comfortable ride.
- With its IPX7 waterproof rating, you can confidently use the TL02 in various weather conditions, including rain and snow.
Warranty and Support
For any product inquiries, technical support, or warranty claims, please contact the TOWILD Official Store directly through the platform where you purchased the product. Keep your purchase receipt as proof of purchase.