Skysonic T-902

Contents

Skysonic T-902 Acoustic Guitar Pickup Instruction Manual

Magnetic and Microphone Dual Pickup System with Volume and Tone Controls

1. Introduction

The Skysonic T-902 is an advanced acoustic guitar pickup system designed to capture the rich, natural sound of your instrument. Featuring a dual pickup system combining a magnetic humbucker and a sensitive microphone, it offers versatile tone shaping with independent volume and tone controls. Its non-invasive design allows for easy installation without permanent modification to your guitar.

Skysonic T-902 pickup installed in a guitar soundhole
Skysonic T-902 pickup installed in an acoustic guitar soundhole.

2. Specifications

AttributeValue
Brand NameSkysonic
Model NumberT-902
TypePickup (Magnetic and Microphone)
MaterialMetal, Plastic
ColorBlack
Soundhole Compatibility81-98mm diameter
ControlsVolume, Microphone Volume
Power Source3V Button Battery (CR2032, not included)
FeaturesHumbucker design, shock-absorbing foam clamps, copper-plated metal audio interface

3. Setup and Installation

The Skysonic T-902 is designed for easy, non-invasive installation. No drilling is required for the main pickup unit, but optional tail pin installation may involve minor modification.

3.1. Installing the Pickup Unit

  1. Prepare the Soundhole: Ensure your guitar's soundhole is clean and free of obstructions. The pickup is compatible with soundholes between 81-98mm in diameter.
  2. Position the Pickup: Gently place the pickup unit into the soundhole, ensuring the flexible microphone arm is positioned as desired.
  3. Clamp the Pickup: The pickup features clamps lined with shock-absorbing foam to protect your guitar's finish. Carefully clamp the pickup to the edge of the soundhole.
  4. Secure the Pickup: Use a small screwdriver to tighten the screws on the pickup's clamps, securing it firmly in place. Do not overtighten.
Installation steps for Skysonic T-902 pickup
Step 1: Clamp the pickup to the soundhole edge. Step 2: Fix the pickup in place with a screwdriver.

3.2. Installing the Tail Pin Jack (Optional)

The T-902 includes a strap endpin jack for connecting to an amplifier or PA system. There are two methods for installation:

Method 1: Using an existing tail pin hole

  1. Disassemble the Jack: Unscrew the pickup tail nail (output jack) to separate its components (screws, gaskets, leather buckle).
  2. Prepare the Guitar: If your guitar has an existing tail pin, carefully remove it.
  3. Assemble the Jack: Place the leather buckle over the output jack cable. Then, reassemble the screws and gaskets onto the jack in the correct order.
  4. Install the Jack: Insert the assembled jack into the tail pin hole and tighten it securely.
Diagram for tail pin installation method one
Tail pin installation method one, showing components and assembly order.

Method 2: Drilling a new tail pin hole (Advanced)

Caution: This method requires drilling into your guitar and should only be performed by experienced individuals or a professional luthier to avoid damage.

  1. Drill the Hole: Using a small electric drill, carefully create a hole for the tail pin jack. Ensure the hole size is appropriate for the jack and avoid making it too large.
  2. Install the Audio Output Interface: Insert the audio output interface into the newly drilled hole.
  3. Secure the Interface: Tighten the nut on the audio output interface and fix its position with the provided thread fastener.
Skysonic T-902 output jack installed on a guitar side
Example of the output jack installed on the side of an acoustic guitar.

3.3. Cable Management

The external cable can be neatly secured using the included cable management buckle to prevent it from interfering with playing or causing unwanted noise.

Skysonic T-902 installed with cable management
The external cable fixed with a cable management buckle.

4. Operating Instructions

The Skysonic T-902 features intuitive controls for adjusting your sound.

4.1. Powering On/Off

The pickup is active and requires a 3V CR2032 button battery (not included). Insert the battery into the compartment located on the rear of the pickup unit. The pickup will be active once the battery is installed.

Rear view of Skysonic T-902 showing battery and control knobs
Rear view of the pickup showing the battery compartment and control knobs.

4.2. Adjusting Volume and Tone

The pickup unit has two main control knobs:

  • Volume Knob: Controls the overall output volume of the magnetic pickup.
  • Microphone Volume Knob: Controls the volume of the built-in microphone, allowing you to blend the magnetic and microphone signals for your desired tone.

Adjust these knobs to achieve the desired balance and overall output level for your performance or recording.

Skysonic T-902 control knobs labeled
Control knobs for microphone volume and overall volume.

4.3. Connecting to an Amplifier/PA

Connect a standard 1/4-inch instrument cable from the output jack of the T-902 to your amplifier, mixer, or audio interface.

Skysonic T-902 pickup with output cable and jack
The Skysonic T-902 pickup with its output cable and jack.

4.4. Sound Demonstration

Watch this video to hear the Skysonic T-902 in action:

Acoustic guitar demonstration using the Skysonic T-902 pickup.

5. Maintenance

  • Cleaning: Wipe the pickup unit with a soft, dry cloth to remove dust and grime. Avoid using harsh chemicals or abrasive materials.
  • Battery Replacement: Replace the 3V CR2032 button battery when the sound becomes weak or distorted. Ensure correct polarity when inserting the new battery.
  • Storage: When not in use for extended periods, consider removing the battery to prevent leakage. Store the pickup in a cool, dry place.

6. Troubleshooting

  • No Sound Output:
    • Check if the battery is correctly installed and has sufficient charge.
    • Ensure all cables are securely connected.
    • Verify that the volume knobs on the pickup and your amplifier are turned up.
  • Weak or Distorted Sound:
    • Replace the battery with a fresh one.
    • Check for loose connections in cables or the output jack.
    • Adjust the microphone volume knob to reduce feedback if present.
  • Excessive Noise/Hum:
    • The humbucker design is intended to reduce noise, but ensure the pickup is securely clamped and not vibrating against the guitar body.
    • Check for interference from other electronic devices.
    • Ensure the output cable is of good quality and properly shielded.

7. User Tips

  • Nylon Strings: While primarily designed for steel-string acoustic guitars, the T-902's microphone component can pick up the vibrations of nylon strings. For optimal sound with nylon strings, experiment with blending the microphone signal more prominently. The magnetic pickup component will only work effectively with strings that have ferrous material (e.g., steel core).
  • Tone Blending: The dual magnetic and microphone system allows for a wide range of tones. Experiment with the individual volume controls to find the perfect blend for your playing style and environment. The magnetic pickup provides warmth and bass, while the microphone adds air and articulation.
  • Feedback Control: If you experience feedback, especially at high volumes, try reducing the microphone volume and relying more on the magnetic pickup. Adjusting your position relative to the amplifier can also help.

8. Warranty and Support

For any issues or questions regarding your Skysonic T-902 Acoustic Guitar Pickup, please contact the retailer or manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.