Kunray BS-21

Contents

Kunray Brushless DC Motor Controller User Manual

Model: BS-21

1. Introduction

Thank you for choosing the Kunray Brushless DC Motor Controller. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your controller. This controller is designed for electric bicycles and scooters, offering reliable power management for your vehicle's motor. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

⚠️ Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage.

  • Always disconnect power before performing any installation, maintenance, or troubleshooting.
  • Ensure all wiring connections are secure and insulated to prevent short circuits.
  • Do not expose the controller to water or extreme temperatures.
  • Professional installation is recommended for optimal safety and performance.
  • Keep out of reach of children.

3. Specifications

FeatureSpecification
ModelBS-21
TypeBrushless DC Motor Controller
BrandKunray
Voltage36V / 48V (selectable via wiring)
Power500W
Current Output25A ± 1A
MOSFETs9MOS
Cutoff Voltage29V ± 0.5V (for 36V) / 39V ± 0.5V (for 48V)
Dimensions (L x W x H)120mm x 50mm x 30mm
Weight250g
ApplicationElectric Bicycles, Electric Scooters

Note: Length, width, and height measurements are approximate. A 1-3 mm error may occur due to manual measurement.

Dimensions and Weight of the Kunray Brushless DC Motor Controller

Image: Controller dimensions (120mm x 50mm x 30mm) and weight (250g).

4. Package Contents

The package typically includes:

  • 1 x Kunray BS-21 Brushless DC Motor Controller

Please inspect the package contents upon receipt to ensure all items are present and undamaged.

5. Installation and Wiring

Before installation, ensure your vehicle's power is completely off. Refer to the wiring diagrams below for correct connections. Incorrect wiring can damage the controller or other components.

Wiring Connections Overview

The controller features various connectors for different functions. Identify each wire bundle carefully:

  • Battery +/-: Main power input from the battery.
  • Motor Phase: Connects to the motor's phase wires.
  • Hall: Connects to the motor's Hall sensors.
  • Throttle: Connects to the throttle input.
  • Brake: Connects to the brake levers (power-off brake or cut-off brake).
  • PAS Sensor: Connects to the Pedal Assist System sensor (optional for some setups).
  • Headlight Power: (Black: GND, Yellow: Power+) For headlight connection.
  • Power Lock: For ignition/power switch.
  • 3 Speed: For speed selection switch.
  • Fixed Speed Cruise: For cruise control function.
  • Reverse: For reverse function (if applicable).
  • Self Study: For initial motor pairing/learning.

Wiring Diagrams

Below are typical wiring diagrams for 36V and 48V configurations. Ensure you use the correct diagram for your controller's voltage and brake type.

Wiring Diagram for 36V Kunray Brushless DC Motor Controller with Hall Brake

Image: Wiring diagram for a 36V controller, showing connections for Battery, Self Study, Headlight Power, PAS sensor, Fixed Speed Cruise, Brake, Throttle, Hall, 3 Speed, Power Lock, and Motor Phase. This diagram is for a Hall brake type.

Wiring Diagram for 48V Kunray Brushless DC Motor Controller with 3-Wire Hall Brake

Image: Wiring diagram for a 48V controller, showing connections for Battery, Fixed Speed Cruise, Reverse, PAS sensor, Self Study, Electric Brake, Throttle, 3 Speed, Hall, Power Lock, and Motor Phase. This diagram is for a 3-wire Hall brake type.

Self-Study Function

The 'Self Study' wires (often two white wires) are used to automatically pair the controller with your motor. Connect these two wires together, turn on the power, and the motor should start spinning. If it spins in the wrong direction, disconnect the self-study wires, reconnect them, and try again. Once the motor spins correctly, disconnect the self-study wires and insulate them. Do not leave them connected during normal operation.

6. Operation

  1. Power On: Ensure all connections are secure. Turn on the power lock (if connected) or the main battery switch.
  2. Throttle Control: Use the throttle to control the motor speed.
  3. 3-Speed Function: If a 3-speed switch is connected, use it to select between low, medium, and high speeds.
  4. Fixed Speed Cruise: Activate the cruise control function by pressing the designated button/switch (if connected).
  5. Braking: Applying the brake levers will cut off power to the motor, providing a power-off braking function.
  6. Reverse Function: If connected, activate the reverse switch for backward movement.

7. Maintenance

  • Keep the controller clean and dry. Avoid exposure to moisture, dust, and corrosive substances.
  • Regularly check all wiring connections for tightness and signs of wear or damage.
  • Ensure adequate ventilation around the controller to prevent overheating.
  • Do not attempt to open or modify the controller casing, as this will void any potential warranty and may cause damage.

8. Troubleshooting

ProblemPossible CauseSolution
Motor not runningLoose connections, no power, faulty throttle, motor/Hall sensor issue.Check all wiring according to diagrams. Ensure battery is charged and connected. Test throttle. Perform self-study.
Motor runs in wrong directionIncorrect self-study pairing.Repeat the self-study procedure.
Intermittent power/operationLoose or corroded connections.Inspect and secure all wiring connections.
Controller overheatingOverload, insufficient ventilation.Reduce load on motor. Ensure controller is mounted in a well-ventilated area.

If you encounter issues not listed here or if the problem persists after attempting these solutions, please contact customer support.

9. User Tips

  • This controller is versatile and can be used on electric scooters. The PAS (Pedal Assist System) sensor connection is optional and not required for scooter operation.
  • When purchasing or replacing accessories such as throttles or speed selectors, ensure they are compatible with the voltage and connection types of this controller.
  • Always double-check your wiring against the provided diagrams before applying power to avoid damage.
  • For optimal performance, keep the controller away from direct sunlight and excessive heat.

10. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the seller or Kunray customer support. Provide your product model (BS-21) and a detailed description of the issue for faster service.

© 2023 Kunray. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.