1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your new Scimagic-RC SOMMER 868MHz Rolling Code Garage Remote Control. This third-party remote is designed to be compatible with various SOMMER and APERTO garage door and gate openers operating at 868.35 MHz. Please read this manual thoroughly before use to ensure proper functionality and safety.
2. Product Overview
The Scimagic-RC SOMMER 868MHz remote control is a high-quality replacement transmitter for your garage door or gate system. It features rolling code technology for enhanced security and operates on a frequency of 868.35 MHz with FSK modulation.
2.1 Compatible Models
- SOMMER 4011
- SOMMER 4010
- SOMMER 4026 TX03-868-2
- SOMMER 4020 TX03-868-4
- SOMMER 4025
- SOMMER 4031
- SOMMER 4035
- APERTO 4021
- APERTO 4025 TX02-868-2
- APERTO 4020 TX-03-868-4
2.2 Package Contents
- 1 x Remote Control
- 1 x CR2032 Battery (pre-installed or included)
- 1 x Keychain
- 1 x English Manual
2.3 Product Styles
Figure 1: Various styles of the Scimagic-RC SOMMER compatible remote controls.
Figure 2: The remote control can be used for various access control systems.
3. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Scimagic-RC |
| Model Number | SMG-015 SOMMER |
| Encoding Method | Rolling Code |
| Frequency | 868.35MHz (also 868MHz) |
| Modulation | FSK |
| Number of Buttons | 4 |
| Operating Voltage | CR2032 (Battery Included) |
| Transmit Distance | 25-50m in open space (without interference) |
| Certification | CE |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Dimensions (L x W x H) | 13 cm x 11 cm x 2 cm |
| Package Weight | 0.06 kg |
Figure 3: Dimensions of a typical stick-style remote control.
4. Setup (Programming)
To program your new remote control, you will need to pair it with your existing gate or garage door opener's receiver. The process is similar to programming original SOMMER remotes. Always refer to your specific receiver's user manual for the most accurate instructions. Below is a typical programming procedure for a SOMMER Radio Receiver FM 868.8MHz:
- Access Learning Button: Press the LEARNING button on the radio receiver or on the control panel.
- Select Channel: Press the LEARNING button once for channel one (LED 1 lights up), or twice for channel two (LED 2 lights up).
- Transmit Signal: Within the range of the radio receiver, press one of the desired CH buttons on your new remote control. The LED on the receiver will flash and then extinguish, indicating successful pairing to the selected channel.
- Repeat for Additional Remotes: Repeat steps 1 and 2 to teach further manual remote controls to the given radio receiver. A maximum of 112 memory slots are typically available.
- Test Operation: Press the programmed button on your new remote control to test its operation.
Note:
- To remove a single transmitter's code or all transmitter codes from the receiver memory, please refer to your specific receiver manual.
- Ensure you are within close proximity to the receiver during the programming process.
Video 1: Demonstration of programming a remote control to a receiver circuit board.
Figure 4: Visual guide for programming the remote control.
5. Operating Instructions
Once successfully programmed, operating your remote control is straightforward:
- Ensure you are within the operational range of your garage door or gate opener.
- Press the corresponding button on the remote control that you programmed for your specific function (e.g., open, close, stop).
- The garage door or gate should respond accordingly.
6. Maintenance
6.1 Battery Replacement
The remote control uses a CR2032 coin cell battery. When the remote's signal weakens or stops working, it's likely time to replace the battery.
- Carefully open the remote control casing. This may involve unscrewing small screws or prying open a seam with a small flat-head screwdriver.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery, ensuring the correct polarity (+/-).
- Close the remote control casing securely.
6.2 General Care
- Keep the remote control dry and away from extreme temperatures.
- Avoid dropping the remote control or subjecting it to strong impacts.
- Clean the remote control with a soft, dry cloth. Do not use harsh chemicals or abrasives.
7. Troubleshooting
- Remote not working after programming: Double-check the programming steps against your receiver's manual. Ensure the battery is correctly installed and has sufficient charge.
- Reduced operating range: The transmit distance is 25-50m in open space. Obstructions such as garage doors, brick walls, or other interference can significantly reduce the remote control's range. Try operating the remote from a closer distance or in a less obstructed area.
- LED on remote does not light up: The battery may be dead or incorrectly installed. Replace the battery.
- Remote works intermittently: This could indicate a low battery. Replace the CR2032 battery.
8. User Tips
- Verify Compatibility: Before purchasing, always confirm that your existing garage door or gate opener model is listed as compatible to ensure seamless integration.
- Optimal Range: For best performance, try to maintain a clear line of sight between the remote and the receiver. Physical barriers can significantly impact signal strength.
- Button Capacity: This remote features 4 buttons, allowing you to program up to four different functions or devices if your receiver supports multiple channels.
9. Warranty and Support
This product comes with a 1-year warranty from the store. For any questions or support needs, please contact the seller directly. All inquiries are typically answered within 24 hours.
