LoraTap RF WiFi Blinds Roller Shutters Curtains Motor Switch Module User Manual

1. Introduction

This manual provides detailed instructions for the installation, setup, and operation of your LoraTap RF WiFi Blinds Roller Shutters Curtains Motor Switch Module. This smart device allows you to control your electric roller blinds, shutters, or curtains via RF remote, smartphone app (Smart Life/Tuya), and voice commands through Amazon Alexa or Google Home.

Figure 1: LoraTap RF+WiFi Roller Shutter Module Kit

2. Safety Information

• Turn off AC power before beginning any installation or wiring.
• This device is designed only for AC-powered electric motors. Do not connect to DC-powered motors.
• The module should be installed in a wall switch box that complies with relevant national safety standards and has a depth of no less than 60mm.
• This product works exclusively with roller blind motors equipped with electronic or mechanical limit switches.
• Ensure your motor has 4 wires (Blue Wire, Brown Wire, Black Wire, Green/Yellow Wire) before purchasing and installing.

3. Specifications

4. Installation

The module can be installed in a junction box or mounted next to the motor. Ensure AC power is turned off before proceeding.

4.1 Wiring for Standard Blinds (with manual wall switch)

This setup is for motors with 4 wires and includes a manual push-button wall switch (not a rocker switch).

Figure 2: Wiring Diagram with Manual Wall Switch

• Output N: Neutral Wire for Motor
• Input N: Neutral Wire (typically Blue or White wire from AC Power)
• Input L: Live Wire or Hot Wire (typically Brown/Red/Black wire from AC Power)
• Input L (for switch): Input Live Wire for the toggle switch
• Output L1: Brown Wire of Motor (1st output terminal for shutter motor)
• Output L2: Black Wire of Motor (2nd output terminal for shutter motor)
• S1: Terminal for 1st channel of the wall switch
• S2: Terminal for 2nd channel of the wall switch

Note:

• The curtain module does not have a terminal for earth wire; therefore, there is no need to connect the earth wire of the motor to the module.
• After installing the module, the manual wall switch cannot pause the curtain in the middle. Pause functionality is available via the remote or app.

Figure 3: Module Installation with Wall Switch

4.2 Wiring for Blinds with Built-in Driver

For motors with a built-in driver, which typically have 5 wires (L, L1, L2, N, Earth Wire).

Figure 4: Wiring Diagram for Motor with Built-in Driver

4.3 Wiring without a Manual Wall Switch

If you do not intend to use a physical manual wall switch, the wiring is simpler. Control will be exclusively via the RF remote and the smartphone app.

Figure 5: Wiring Diagram without Manual Wall Switch

Figure 6: Module Installation without Wall Switch

If the module does not fit into your junction box, you can remove the screw holder using a pair of pliers.

5. Setup & Pairing

5.1 RF Remote Control Pairing

The RF remote allows you to control up to 4 curtain blinds separately. Each button (1, 2, 3, 4) can be paired with a module.

Figure 7: 4 Channel RF Remote Layout

1. Ensure the module is powered on.
2. Press and hold the pairing button on the module until its indicator light blinks.
3. On the RF remote, press the desired channel button (1, 2, 3, or 4) you wish to assign to this module.
4. The module's indicator light should stop blinking, confirming successful pairing.
5. Repeat for other modules and channels as needed.

You can also pair multiple modules to a single channel for group control, or use a single channel remote to control all modules simultaneously (see Figure 8).

Figure 8: Remote Control Options for Multiple Modules

Video 1: Pairing and App Control Demonstration

5.2 Smart Life / Tuya App Setup

The LoraTap module is compatible with the Smart Life and Tuya Smart apps, available on both Android and iOS.

1. Download and install the "Smart Life" or "Tuya Smart" app from your device's app store.
2. Register or log in to your account.
3. Add Device: In the app, tap the "+" icon to add a new device. Select "Curtain Switch" from the device list.
4. Reset Device: Follow the app's instructions to reset the device. This usually involves powering the device on and confirming the indicator is blinking rapidly.
5. Connect to Wi-Fi: Ensure your phone is connected to a 2.4GHz Wi-Fi network (5GHz is not supported). The app will guide you through connecting the module to your Wi-Fi network.
6. Once successfully added, you can rename the device and assign it to a room.

Figure 9: Smart Life App Device Addition Process

5.3 Setting Running Time

You can set the running time of your blinds from 1 to 120 seconds, which is useful for large blinds to ensure full opening or closing.

Figure 10: Running Time Setting in App

6. Operating Instructions

6.1 App Remote Control

Once the module is added to the Smart Life/Tuya app, you can control your blinds from anywhere with an internet connection (2G, 3G, 4G, or Wi-Fi).

• Open/Close/Pause: Use the virtual buttons in the app interface to open, close, or pause your curtains.
• Timing Function/Schedules: Program schedules for automatic opening and closing. For example, set the blinds to open at 7:00 AM and close at 10:00 PM daily.

Figure 11: Creating Schedules in the App

6.2 Voice Control

Integrate your LoraTap module with Amazon Alexa or Google Home for hands-free control.

• Link your Smart Life/Tuya account to your Alexa or Google Home app.
• Use commands like "Alexa, open the curtain switch" or "Hey Google, close the blinds."
• For pausing, you can create a scene in the Smart Life app (e.g., "Pause Curtain") and then create a routine in Alexa or Google Home to activate that scene via voice command.

Figure 12: Voice Control with Smart Assistants

6.3 Group Function and Device Sharing

• Group Control: In the Smart Life/Tuya app, you can create groups to control multiple blinds simultaneously. This is useful for managing all blinds in a room or your entire house with a single command.
• Device Sharing: Share control of your smart devices with family members through the app, allowing everyone in the household to manage the blinds.

Figure 13: Creating Device Groups

7. User Tips

• Compatibility Check: Always verify that the RF curtain remote is compatible with your specific roller shutter switch. This kit's switches are RF + WiFi version.
• Wall Switch Position: When using the app to control the shutter, ensure any connected manual wall switch is in the 'STOP' position to prevent conflicts and protect the motor.
• Wi-Fi Network: The device only supports 2.4 GHz Wi-Fi networks. Ensure your router is configured correctly or your phone is connected to the 2.4 GHz band during setup.
• Multiple Modules: If using multiple modules in the same space, rest assured that each product has a unique ID, preventing interference.
• Module Fit: If the module doesn't fit in your junction box, the screw holder can be removed with pliers for a more compact fit.

8. Troubleshooting

• Module not responding:
  • Check if AC power is supplied to the module.
  • Ensure the module is correctly wired according to the diagrams in Section 4.
  • If using a manual wall switch, ensure it is in the 'STOP' position for app control.
  • Re-attempt pairing with the RF remote or re-add the device to the Smart Life/Tuya app.
• App control not working:
  • Verify your smartphone has an active internet connection.
  • Confirm the module is connected to a 2.4GHz Wi-Fi network. 5GHz networks are not supported.
  • Check the Wi-Fi signal strength at the module's location.
  • Ensure the manual wall switch (if present) is in the 'STOP' position.
• Motor not moving:
  • Confirm the motor is an AC-powered electric motor. DC motors are not compatible.
  • Check all motor wiring connections (N, L1, L2) to the module.
  • Ensure the motor has electronic or mechanical limit switches.
• Interference with multiple modules: Our product with unique ID, no interference to use many kits in the same space. If you experience unexpected behavior, check for other RF devices operating on similar frequencies.

9. Warranty & Support

• Warranty: This product comes with a 2-year warranty.
• User Manual (PDF): A detailed user manual in PDF format is available for further reference. You can access it via the following link: LoraTap User Manual (PDF).
• For any technical support or questions, please contact the seller directly.