MOES ZigBee 3.0 Smart Curtain Switch Module User Manual

1. Introduction

The MOES ZigBee 3.0 Smart Curtain Switch Module is a smart home device that integrates ZigBee wireless communication technology with curtain switch functionality. It enables intelligent control over curtains, allowing users to remotely manage their opening and closing via mobile applications or voice commands, thereby enhancing convenience and comfort in your home.

This module is designed to work with traditional curtain switches and motorized roller blinds or shutter motors, bringing smart capabilities to existing setups.

2. Product Features

• Enhanced Convenience with Traditional Switch Integration: Seamlessly integrates with your existing traditional curtain switch. Press your traditional curtain switch once after switching up/down (on the same button) to manually stop your curtains.
• RF and Wireless Remote Control: Control your connected appliances remotely via your smartphone from anywhere. The module supports 2.4 b/g/n networks and requires a Tuya ZigBee Gateway for connection. It also features built-in RF433 frequency, allowing control with a 1527 encoding remote control switch.
• Hands-free Voice Control: Requires a Tuya ZigBee hub for Smart Life App configuration. Compatible with Amazon Alexa and Google Home for convenient voice control of your roller blinds.
• Timer Setting and Family Sharing: Utilize the timer feature in the app to automatically open/close your roller blinds at specific times. Supports three timing types: schedules, countdowns, and loops. Devices can be shared with family members, allowing multiple users to control the module or one user to control multiple modules.

3. Safety Warnings

• Power Disconnection: Always turn off the circuit breaker and verify power is off using an electrical tester before installing or removing the device. Failure to do so may result in irreversible damage or electrical hazards.
• Professional Installation: Installation must be carried out by a qualified electrician in accordance with local regulations.
• Child Safety: Keep the device out of the reach of children.
• Environmental Conditions: Keep the device away from water, damp, or hot environments.
• Signal Interference: Install the device away from strong signal sources such as microwave ovens that may cause signal interruption and abnormal operation.
• Obstruction: Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
• Tampering: Do NOT attempt to disassemble, repair, or modify the device.

4. Setup

4.1. Preparation for Use

1. Download the MOES App from the App Store or scan the provided QR code. The MOES App offers enhanced compatibility and features compared to Tuya Smart/Smart Life App.
2. Ensure the device is within the effective signal coverage of your smart ZigBee gateway for successful connection.
3. Ensure your motor has 4 wires before ordering (motor not included).
4. This module is not compatible with DC motors.
5. Use this module with an RF433 remote control switch (only 1527 encoding required).

4.2. Wiring Instructions and Diagrams

Important: Disconnect the power supply before carrying out any electrical installation work.

1. Connect wires according to the wiring diagram below.
2. Insert the module into the junction box.
3. Connect the power supply and follow the curtain switch module configuration instructions.

Figure 1: Wiring Diagram for MOES Smart Curtain Switch Module. Shows connections for both with and without a traditional curtain switch.

4.3. App Configuration (ZigBee Pairing)

1. Download & Register: Download the MOES Application. Enter the Register/Login interface; tap Register to create an account or Log in if you already have one.
2. Add Device: Ensure your phone is connected to a ZigBee Gateway. In the MOES App, select 'Add subdevice'.
3. Enter Pairing Mode: Press the reset button on the module for more than 7 seconds until the beep sounds continuously and rapidly (Di-Di-Di...) to enter ZigBee pairing mode.
4. Complete Pairing: Follow the in-app instructions. The connection may take 10-120 seconds depending on your network condition.
5. Name Device: Once the device is added successfully, you can edit its name and enter the device page.

4.4. RF Link Method

To pair the module with an RF433 remote control (1527 encoding):

1. Pair with Open Button: Press the reset button on the module 5 times and wait for 2 seconds until the red indicator flashes fast. Then, press the 'Open' button on your RF remote.
2. Pair with Close Button: Press the reset button on the module 6 times and wait for 2 seconds until the red indicator flashes fast. Then, press the 'Close' button on your RF remote.
3. Pair with Stop Button: Press the reset button on the module 7 times and wait for 2 seconds until the red indicator flashes fast. Then, press the 'Stop' button on your RF remote.

Figure 2: 1 Channel RF433 Curtain Remote Control (1527 Standard Code).

5. Operating the Device

5.1. Manual Control

The curtain switch module terminal reserves access for a manual override function. You can use a connected traditional curtain switch to open, close, or stop the curtains. Press the traditional curtain switch once after switching to up/down (on the same button) to stop the curtains.

5.2. App Control

Use the MOES App (or Smart Life/Tuya App) to remotely control your roller blinds from anywhere. The app allows you to open, close, or set the curtains to a specific percentage.

Figure 3: Adjusting curtain percentage via the mobile application.

5.3. Voice Control

Once connected to a ZigBee hub and integrated with Amazon Alexa or Google Home, you can control your roller blinds using voice commands. For example, say "Alexa, turn off the roller blinds."

Figure 4: Voice control setup with smart speakers.

5.4. Timer Functions

The app allows you to set schedules, countdown timers, and loop timers to automate the opening and closing of your roller blinds.

Figure 5: Setting schedules and countdown timers for curtain operation.

5.5. RF Remote Control Operation

After linking the RF remote control as described in Section 4.4, you can use the remote to control the curtains. The video below demonstrates the RF remote control in action.

6. Maintenance

No specific user maintenance is required for the MOES ZigBee 3.0 Smart Curtain Switch Module. Ensure the device is kept clean and dry. For any issues requiring repair, do not attempt to disassemble or repair the device yourself; contact customer support.

7. Troubleshooting

7.1. General Issues

• If you encounter problems installing or operating your device, refer to the product data sheet available at: https://www.moestech.com/blogs/news/zrm-108

7.2. Cannot Set Up the Sensor

• Power Check: Verify that the device is powered on.
• Network Connection: Ensure your mobile phone and the switch module are connected to the same 2.4 GHz WiFi network.
• Internet Connectivity: Check for a stable internet connection.
• App Password: Confirm that the password entered in the app is correct.
• Wiring: Double-check that the wiring is correct according to the diagrams in Section 4.2.

7.3. Resetting the Module

To reset the module:

• ZigBee Pairing Mode Reset: Press the reset button for more than 7 seconds until the beep sounds continuously rapidly (Di-Di-Di...) to enter ZigBee pairing mode.
• RF Mode Clearing: Press the reset button 10 times to clear the RF pairing mode.

8. Technical Specifications

9. User Tips

• When configuring the module, keep your smartphone close to the device and ensure you have at least 50% Wi-Fi signal strength for optimal connection.
• If using a traditional curtain switch, remember that a single press after initiating an up/down movement will stop the curtains. This is a convenient way to precisely position your blinds.
• For best performance, ensure your ZigBee gateway is centrally located and provides strong signal coverage to all connected devices.

10. Warranty and Support

10.1. Warranty Information

The MOES ZigBee 3.0 Smart Curtain Switch Module is covered by a 1-year manufacturer warranty from the date of purchase. This warranty covers product quality problems under normal use. Please retain your proof of purchase for warranty claims.

The warranty does not cover:

• Mechanical damage caused by user fault or product defects resulting from such damage.
• Damage caused by improper use of the product.
• Performance of maintenance and similar operations specified in the user manual, which are the user's responsibility.
• Defects due to natural wear and tear during use.
• Products with removed warranty seals or serial numbers.
• Unauthorized repairs or modifications.
• Use of non-original parts and consumables.

For warranty claims, please prepare the product and packaging and contact the place of purchase or MOES customer service.

10.2. Declaration of Conformity

WENZHOU NOVA NEW ENERGY CO.,LTD declares that the radio equipment type MS-108ZR is in compliance with Directives 2014/53/EU, 2014/35/EU, 2014/30/EU, and 2011/65/EU.

The full text of the EU Declaration of Conformity is available at: https://www.moestech.com/blogs/news/zrm-108

10.3. Customer Support

For any further assistance or inquiries, please contact MOES customer service at: service@moeshouse.com

11. Recycling Information

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.