NB ERGONOMIC F120

Contents

NB F120 Gas Spring Full Motion TV Wall Mount

Model: F120

1. Introduction

Thank you for choosing the NB F120 Gas Spring Full Motion TV Wall Mount. This mount is designed to provide an ergonomic and flexible viewing experience for your 17-27 inch LCD monitors. Featuring a gas spring mechanism, it allows for smooth and effortless adjustments to achieve your desired viewing angle and height. Please read this manual carefully before installation and use to ensure safe and optimal performance.

2. Safety Information

  • Ensure the wall structure can safely support the weight of the mount and your monitor.
  • Do not adjust tension without putting the display onto the wall mount.
  • Always ensure the display's net weight is between 4.4-15 lbs (2-7kg) before adjusting tension.
  • If the TV screen is gradually sliding down, turn the tension adjustment screw anti-clockwise using the 'F' key to increase tension until the screen stays in position. Likewise, turn clockwise to reduce tension.
  • Be aware of unbalanced display gravity during installation to the mount.
  • The bubble level is typically included for installation guidance. However, due to international shipping regulations, the liquid inside the bubble level may be removed or the bubble level itself may be excluded from the package. Please use an alternative leveling tool if needed.

3. Package Contents

Please verify that all components are present and undamaged before proceeding with installation.

Package contents including the mount, hardware, and manual

Figure 3.1: NB F120 Package Contents

The package typically includes:

  • NB F120 Gas Spring Wall Mount
  • Mounting Hardware (screws, anchors, washers)
  • Installation Tools (e.g., Allen wrench)
  • User Manual

4. Specifications

FeatureSpecification
Model NumberF120
Movement TypeRotate (Full Motion, Gas Spring)
Application Laptop Size>20" (Monitor Size: 17-27 inch)
Load Capacity4.4-15 lbs (2-7 kg)
VESA Compliance75x75mm, 100x100mm
Height Lift Range0-155mm (6.1 inches)
Rotation360°
Tilt Angle Adjustment+35° to -50°
Swivel Angle180°
Wall Distance87-285mm
Adjustable LengthYes
Color OptionsBlack, Silver Grey (matte charcoal)
Package Dimensions (approx.)40cm (L) x 20cm (W) x 9cm (H)
Package Weight (approx.)1.7 kg
Product overview with VESA, load capacity, and screen size

Figure 4.1: Product Overview

Product dimensions diagram side view

Figure 4.2: Product Dimensions (Side View)

Product dimensions diagram front and top view

Figure 4.3: Product Dimensions (Front and Top View)

Wall mount dimensions

Figure 4.4: Wall Mount Dimensions

5. Setup and Installation

This section provides step-by-step instructions for installing your NB F120 wall mount.

5.1. Wall Mounting the Arm

  1. Position the wall mount plate on your desired wall location. Use a pencil to mark the drill points.
  2. Drill pilot holes at the marked locations.
  3. Secure the wall mount plate to the wall using the provided screws and anchors. Ensure it is level using a spirit level.
  4. Attach the arm to the wall mount plate.

Video 5.1: Product Demonstration and Installation Guide

5.2. Attaching the Monitor

  1. Align the VESA mounting holes on your monitor with the VESA plate on the arm.
  2. Secure the monitor to the VESA plate using the appropriate screws.

5.3. Cable Management

The mount features hidden cable management to keep your workspace tidy.

  1. Route your display cables (e.g., HDMI, power) along the arm.
  2. Use the integrated cable clips or channels to secure the cables neatly.
Cable management feature

Figure 5.1: Cable Management

6. Operating Instructions

The NB F120 mount offers various adjustments for optimal viewing comfort.

6.1. Height Adjustment

The gas spring allows for smooth vertical movement. Gently push or pull the monitor to adjust its height within the 0-155mm range.

Height lift range diagram

Figure 6.1: Height Lift Range

6.2. Tilt Adjustment

Tilt the monitor screen up or down to reduce glare and optimize your viewing angle. The tilt range is +35° to -50°.

Tilt angle adjustment diagram

Figure 6.2: Tilt Angle Adjustment

6.3. Swivel and Rotation

The mount allows for 180° swivel and 360° full rotation, enabling you to orient your screen horizontally or vertically.

Swivel angle diagram

Figure 6.3: Swivel Angle

Full rotation diagram

Figure 6.4: Full Rotation

6.4. Tension Adjustment

The gas spring tension may need adjustment based on your monitor's weight to ensure it holds its position. Use the provided Allen wrench.

Tension adjustment diagram

Figure 6.5: Tension Adjustment

Setting static position and tension adjustment steps

Figure 6.6: Setting Static Position and Tension Adjustment

Setting tilt angle position and 360 degree rotation steps

Figure 6.7: Setting Tilt Angle Position and 360° Rotation

7. Maintenance

  • Regularly check all screws and connections to ensure they are tight and secure.
  • Clean the mount with a soft, damp cloth. Avoid abrasive cleaners or solvents.
  • Do not lubricate the gas spring mechanism.

8. Troubleshooting

8.1. Monitor is sliding down or not holding position:

  • Check Monitor Weight: Ensure your monitor's weight is within the specified range of 4.4-15 lbs (2-7 kg). If it's too light or too heavy, the gas spring may not function correctly.
  • Adjust Gas Spring Tension: Use the provided Allen wrench to turn the tension adjustment screw anti-clockwise to increase tension. Refer to Figure 6.6 for guidance.

8.2. Monitor is difficult to move or too stiff:

  • Adjust Gas Spring Tension: Use the provided Allen wrench to turn the tension adjustment screw clockwise to decrease tension. Refer to Figure 6.6 for guidance.

8.3. Mount feels unstable:

  • Check Wall Installation: Re-verify that the wall mount plate is securely fastened to the wall and all screws are tightened.
  • Verify Monitor Attachment: Ensure the monitor is correctly attached to the VESA plate and all screws are tight.

9. User Tips

  • Verify Compatibility: Before purchasing, always double-check your monitor's weight and VESA pattern (75x75mm or 100x100mm) to ensure it falls within the F120's specifications. This mount is designed for monitors weighing between 2-7kg.
  • Cable Management: Utilize the integrated cable management features to keep your workspace neat and prevent cable damage.
  • Initial Tension Adjustment: Perform the gas spring tension adjustment only after the monitor is securely mounted to the arm. This ensures accurate calibration for your specific display weight.

10. Warranty and Support

For warranty information or technical support, please refer to the seller's policies or contact the retailer where you purchased the product. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.