1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new QAZAKY Carburetor Kit. This kit is designed as a high-quality replacement for various snow thrower engines, ensuring optimal performance and longevity. Please read this manual thoroughly before attempting any installation or maintenance.
2. Package Contents
Your QAZAKY Carburetor Kit includes the following components:
- 1 x Carburetor
- 1 x Carburetor Cleaning Brush
- 1 x Fuel Shut Off Valve
- 1 x Intake Manifold
- 1 x Primer Bulb
- 1 x Fuel Filter
- 3 x Fuel Lines
- 4 x Gaskets
- 10 x Clamps

3. Specifications
| Feature | Specification |
|---|---|
| Material | Alloy |
| Fuel Mounting Hole Diameter | 0.2 inch / 5mm |
| Carburetor Width | 1.69 inch / 43mm |
| Air Intake Diameter | 0.79 inch / 20mm |
| Fuel Inlet Diameter | 0.98 inch / 25mm |

4. Compatibility
This carburetor kit is compatible with a variety of LCT 208cc snow thrower engines and specific models from Ariens and Poulan Pro. Please verify your engine model number before installation.
Replacement for Ariens Models:
- Ariens 20001027, 20001086, 20001368, 20001369
- Ariens Snow Thrower 20001086, 20001369 (with LCT 136cc Snow engine, 21" single stage snow engines)
- 920021 (076000-) Compact 120V Two Stage Snow Thrower
- 920021 (000101-075999) Compact 120V Two Stage Snow Thrower
- 920022 (000801-) Compact Track Snow Thrower 120V
- 920022 (000101-000800) Compact Track Snow Thrower 120V
- 938031 (000101-) 21-In. Single Stage Ax 208 Recoil Single Stage Snow Thrower
- 938032 (000101-) 21-In. Single Stage Ax 208 Electric Start Snow Thrower
- 938033 (000101-) 21-In. Single Stage, Ax 208 Electric Start Remote Chute Control
- 920403 Sno-Tek 28 120V
- 2T24LET Compact Track
- SS21 1208E, SS21 208EC, SS21 208R
- ST24LE Compact +
Replacement for LCT Engines:
- LCT 03121, 03122, 13141, 13142, L13, LCT03121, LCT03122, SKSN0312.1, SKSN0312.2 snow blowers
- LCT engines (Liquid Combustion Technology) SKSN0312.1
Replacement for Poulan Pro / Sears / McCulloh:
- Poulan Pro 436565, 585020402, 532436565 (with LCT 208cc snow engine) snow blowers
- Sears / McCulloh 532436565 snow throwers
5. Installation Guide
Safety First: Always ensure the engine is off, cool, and the spark plug wire is disconnected before beginning any work to prevent accidental starting.
- Prepare the Engine: Locate the existing carburetor on your snow thrower engine. Take photos of the current setup, especially the fuel lines and linkages, for reference during reassembly.
- Disconnect Fuel Supply: Turn off the fuel supply valve (if present). Disconnect the fuel lines from the old carburetor. Be prepared for some fuel spillage and have a suitable container to catch it.
- Remove Linkages: Carefully disconnect the throttle and choke linkages from the old carburetor. Note their positions and connections.
- Remove Old Carburetor: Unscrew the mounting bolts or nuts that secure the carburetor to the engine. Remove the old carburetor and any old gaskets.
- Clean Mounting Surface: Thoroughly clean the engine's mounting surface to ensure a proper seal with the new gaskets.
- Install New Gaskets: Place the new gaskets (provided in the kit) onto the engine's mounting studs or surface. Ensure they are correctly oriented to prevent air leaks.
- Mount New Carburetor: Position the new QAZAKY carburetor onto the mounting studs, aligning it with the gaskets. Secure it with the original mounting bolts/nuts. Do not overtighten.
- Reconnect Linkages: Reattach the throttle and choke linkages to the new carburetor, referring to your earlier photos if needed. Ensure they move freely and operate correctly.
- Install Fuel Filter and Shut-Off Valve: Install the new fuel filter in the fuel line between the fuel tank and the carburetor. Install the fuel shut-off valve in an accessible location in the fuel line.
- Connect Fuel Lines: Connect the new fuel lines from the tank, through the filter and shut-off valve, to the carburetor. Use the provided clamps to secure all fuel line connections to prevent leaks.
- Prime the System: Turn on the fuel supply. Press the primer bulb several times until fuel is visible in the bulb or the carburetor bowl.


6. Operation
After successful installation, follow your snow thrower's manufacturer instructions for starting the engine. Generally, this involves:
- Ensure the fuel shut-off valve is open.
- Set the choke to the 'Full Choke' position.
- Press the primer bulb 3-5 times (or as recommended by your engine manufacturer).
- Set the throttle to the 'Fast' or 'Run' position.
- Engage the starter (pull cord or electric start).
- Once the engine starts, gradually move the choke to the 'Off' or 'Run' position as the engine warms up.
7. Maintenance
Regular maintenance of your carburetor and fuel system will ensure reliable performance.
- Carburetor Cleaning: Use the provided cleaning brushes to periodically clean the carburetor's internal passages and jets. This helps prevent fuel deposits and clogs.
- Fuel Filter Inspection: Regularly check the fuel filter for debris or discoloration. Replace it if it appears dirty or clogged to ensure a clean fuel supply to the carburetor.
- Fuel Line Inspection: Inspect fuel lines for cracks, leaks, or hardening. Replace any damaged lines promptly.
- Gasket Check: Periodically check the carburetor gaskets for signs of wear or damage, which could lead to air leaks and affect engine performance.
- Fuel Quality: Always use fresh, clean fuel. Stale or contaminated fuel is a common cause of carburetor issues. Consider using a fuel stabilizer, especially during off-season storage.

8. Troubleshooting
If you encounter issues after installing your new carburetor, consider the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine won't start | No fuel, clogged fuel filter, incorrect choke/primer usage, air leak | Check fuel level, open shut-off valve, replace fuel filter, ensure proper starting procedure, check gaskets for leaks. |
| Engine runs rough/stalls | Clogged carburetor jet, air leak, old fuel | Clean carburetor, check gaskets, drain old fuel and refill with fresh fuel. |
| Loss of power | Partially clogged carburetor, fuel delivery issue | Clean carburetor, inspect fuel filter and lines. |
| Fuel leak | Loose fuel line, damaged gasket, faulty fuel shut-off valve | Tighten clamps, replace damaged gaskets, replace shut-off valve. |
9. User Tips
- Pre-Installation Check: Before installing, compare the new carburetor with your old one to ensure all connections and mounting points match.
- Fuel Quality: Always use fresh, high-quality gasoline. Ethanol in fuel can cause issues with carburetors over time, so consider using ethanol-free fuel or a fuel stabilizer.
- Seasonal Storage: If storing your snow thrower for an extended period, drain the fuel system or run the engine until it runs out of fuel to prevent gumming up the carburetor.
10. Warranty and Support
Your QAZAKY Carburetor Kit comes with an 18-month warranty from the date of purchase, covering manufacturing defects. This warranty ensures your satisfaction and provides peace of mind.
For technical assistance, troubleshooting, or warranty claims, please contact the seller directly. Provide your purchase details and a clear description of the issue to facilitate a quick resolution.