Sumsour 8586

Contents

Sumsour 8586 Soldering Iron Hot Air Rework Station User Manual

Model: 8586

1. Introduction

The Sumsour 8586 is a versatile 2-in-1 SMD Rework Soldering Station, combining a hot air gun and a soldering iron in a single, compact unit. Its alloy metal body and high-quality silicone shell offer an elegant appearance and energy efficiency. Both the hot air gun and soldering iron can be used independently without interference. The system features microcomputer control for quick warm-up and PID technology for enhanced temperature stability, making it ideal for mounting and reworking SMD components by hand.

2. Safety Information

  • Always operate the soldering station in a well-ventilated area to avoid inhaling fumes.
  • Wear appropriate personal protective equipment, including safety glasses and heat-resistant gloves.
  • Ensure the workstation is clean and free of flammable materials.
  • Do not touch the hot air gun nozzle or soldering iron tip directly, as they reach very high temperatures.
  • Always place the hot air gun in its holder and the soldering iron in its stand when not in use.
  • Disconnect the power supply before performing any maintenance or changing accessories.
  • Keep the device away from children and pets.
  • Use only original or approved replacement parts and accessories.

3. Package Contents

The Sumsour 8586 Soldering Station typically includes the following components. Specific accessories may vary depending on the purchased set (e.g., SET-1, SET-2, SET-8).

  • 1x Sumsour 8586 Soldering Station Unit
  • 1x Hot Air Gun Handle
  • 1x Soldering Iron Handle
  • 1x Hot Air Gun Holder/Bracket
  • 1x Soldering Iron Stand with Sponge
  • Power Cord (110V US Plug or 220V EU Plug, depending on region)
  • Assorted Nozzles for Hot Air Gun (e.g., 3-8 pieces)
  • Assorted Soldering Iron Tips (e.g., 5-12 pieces, I / B / K / 3C / 2.4D)
  • Solder Wire
  • Tweezers (ESD-12 / ESD-14 / ESD-15)
  • Solder Assist Tools (e.g., 6-in-1 set)
  • Clean Ball / Brass Wire Cleaner
  • Suction Pen
  • Solder Wick (e.g., CP-2015)
  • High Temperature Tape
  • Magnifier (optional, depending on set)
Sumsour 8586 Soldering Station with various accessories
Figure 1: Sumsour 8586 Soldering Station with a comprehensive set of accessories.

4. Setup Instructions

  1. Attach Hot Air Gun Bracket: Secure the hot air gun bracket to the side of the main unit using the provided screws and a screwdriver.
  2. Connect Hot Air Gun: Plug the hot air gun handle's 8-pin connector into the "REWORK" port on the front panel of the soldering station.
  3. Connect Soldering Iron: Plug the soldering iron handle's 5-pin connector into the "SOLDER" port on the front panel.
  4. Prepare Soldering Iron Stand: Place the soldering iron into its stand. If a sponge is included, moisten it slightly before use.
  5. Connect Power: Ensure the power switch on the back of the unit is OFF. Connect the power cord to the unit and then to a suitable power outlet (110V US Plug or 220V EU Plug, depending on your model).
Video 1: Demonstration of assembling the hot air gun bracket, connecting the hot air gun and soldering iron, and powering on the unit.
Diagram showing 5-pin and 8-pin handle plugs and power plugs
Figure 2: Detailed view of the 5-pin plug for the soldering iron handle, 8-pin plug for the hot air gun handle, and regional power plugs (European and US).

5. Operating Instructions

5.1 General Operation

  1. Power On: Flip the main power switch on the back of the unit to the ON position. The digital display will light up.
  2. Select Tool: Use the "REWORK" switch for the hot air gun or the "SOLDER" switch for the soldering iron to activate the desired tool.
  3. Temperature Adjustment: Use the "UP" and "DOWN" buttons to adjust the target temperature displayed on the LCD. The unit will quickly reach the set temperature thanks to microcomputer control and PID technology.
  4. Airflow Adjustment (Hot Air Gun): Rotate the "AIR" knob to adjust the airflow for the hot air gun.
Control panel diagram showing hot air gun, nozzle, temperature display, soldering iron, temperature controls, wind speed adjustment, and connection ports.
Figure 3: Front panel controls and connections. Note the "REWORK" and "SOLDER" switches, "UP/DOWN" temperature buttons, "AIR" knob, and digital temperature display.

5.2 Hot Air Gun Specifics

  • The hot air gun handle includes a sensor switch. When the handle is picked up from its holder, the system automatically enters operating mode.
  • When the handle is placed back into its holder, the system will automatically switch to standby mode and initiate an automatic cooling function to prolong the heater's life.
  • Ensure appropriate nozzles are attached for your specific rework task.
Close-up of the hot air gun nozzle
Figure 4: Close-up view of the hot air gun nozzle, where different sized nozzles can be attached.

5.3 Soldering Iron Specifics

  • The soldering iron features an ESD (Electrostatic Discharge) safe design to protect sensitive electronic components.
  • Always keep the soldering iron tip clean by wiping it on the moist sponge in the stand or using a brass wire cleaner.
  • Tin the tip regularly with solder to prevent oxidation and ensure efficient heat transfer.
Soldering iron with its cable
Figure 5: The soldering iron component of the station.
Soldering iron stand with cleaning sponge
Figure 6: The all-metal anti-static soldering iron base with a high-temperature resistant sponge.

6. Maintenance

6.1 Cleaning

  • Regularly clean the soldering iron tip using the moist sponge or brass wire cleaner to remove excess solder and flux residue.
  • Ensure the hot air gun nozzle is free from debris.
  • Wipe the main unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.

6.2 Tip and Heater Replacement

  • The soldering iron uses an international standard heater, allowing for convenient replacement.
  • Replace soldering iron tips when they become worn or damaged to maintain optimal performance.
  • Refer to the specific instructions for replacing the hot air gun heater or soldering iron heater if needed.

6.3 Automatic Cooling Function

The hot air gun features an automatic cooling function. When the hot air gun is placed back into its holder, the system will automatically cool down the heating element before shutting off the fan. This significantly prolongs the life of the heating element and the hot air gun itself.

7. Troubleshooting

  • No Power: Check the power cord connection and ensure the main power switch is ON. Verify the power outlet is functional.
  • No Heat from Soldering Iron/Hot Air Gun: Ensure the respective "SOLDER" or "REWORK" switch is activated. Check if the temperature is set correctly and if the heating element is functioning.
  • Temperature Fluctuations: The unit uses PID technology for stable temperature. If significant fluctuations occur, ensure proper connection of the handles and that the unit is not exposed to strong drafts.
  • Hot Air Gun Not Cooling Down: Ensure the hot air gun is correctly placed in its holder to activate the sensor switch and initiate the cooling cycle.
  • Poor Soldering Performance: Clean the soldering iron tip, re-tin it, and ensure the correct temperature is set for the solder type and components being used.

8. Specifications

FeatureSpecification
Model Number8586
DimensionsSoldering Station (approx. 10 x 13.2 x 15 cm)
Input Voltage110V / 220V AC
Output Voltage700W (Total)
CertificationCE
Hot Air Rework Station
Power700W
Resistance<2Ω
Handpiece Size<23mm
Temperature Stability± 1°C
Fan TypeBrushless ball
Airflow120L/min (max)
Noise<45dB
Temperature Control100~450°C
Soldering Iron
Power60W
Resistance<2Ω
Temperature Stability± 1°C
Iron TypeESD design
Heater MaterialNichrome
Temperature Control200~480°C

9. User Tips

  • For optimal performance and longevity, always allow the hot air gun to complete its automatic cooling cycle before powering off the unit.
  • Regularly inspect soldering iron tips for wear and replace them as needed to ensure clean and efficient soldering.
  • When working with sensitive components, utilize the ESD-safe features of the soldering iron to prevent damage.
  • Experiment with different hot air gun nozzles and airflow settings to find the best combination for various desoldering and rework tasks.

10. Warranty and Support

The Sumsour 8586 Soldering Station comes with a host warranty for one year from the date of purchase. For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.