SEMBO Block City Space Rocket Aerospace Spaceship Building Blocks Space Station Bricks

Contents

SEMBO Block City Space Rocket Aerospace Spaceship Building Blocks Instruction Manual

Model: City Space Rocket Aerospace Spaceship Building Blocks Space Station Bricks

Introduction

This instruction manual provides detailed guidance for assembling and maintaining your SEMBO Block City Space Rocket Aerospace Spaceship Building Blocks set. This advanced building block set allows you to construct various space exploration models, including rockets, satellites, space stations, and astronaut figures. Designed for enthusiasts, this set offers a challenging and rewarding building experience with high-quality ABS plastic bricks.

Please read these instructions carefully before beginning assembly to ensure a smooth and enjoyable building process.

Safety Information

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Keep small parts away from children under 3 years old to prevent choking hazards.
  • Do not ingest any parts of the building block set.
  • Ensure all connections are secure during assembly to prevent models from falling apart.
  • Adult supervision is recommended for younger builders.

Package Contents

Your SEMBO Block set includes a variety of small building blocks made from ABS plastic. Please note that this product typically ships without its original retail box to reduce shipping volume and cost. All necessary building blocks and instructions are included within the packaging.

  • Assorted ABS plastic building blocks (quantity varies by model)
  • Assembly instruction booklet (visual guide)
  • (For 'With Led' variants) LED components and battery compartment (batteries not included)

Upon opening, verify that all parts are present according to the included instruction booklet for your specific model. If any parts are missing, please contact customer support.

Setup and Assembly

The assembly process for SEMBO Block sets is designed to be intuitive, following step-by-step visual instructions provided in the included booklet. Below are general guidelines and examples of models you can build.

General Assembly Steps:

  1. Unpack and Sort: Carefully open the packaging and sort the building blocks by color, size, or type as indicated in your model's instruction booklet. This will significantly speed up the building process.
  2. Follow Instructions: Refer to the detailed, step-by-step pictorial instructions provided with your specific model. Each step will show which blocks to use and where to place them.
  3. Secure Connections: Ensure each block is firmly pressed into place to create a stable and durable structure.
  4. LED Integration (if applicable): For models with LED components (e.g., 'With Led' variants), integrate the LED lights and battery compartment as shown in the specific instructions for that model. Ensure correct battery polarity if batteries are required.
  5. Review: After completing the model, double-check all connections and ensure the model is stable.

Example Models and Details:

Overview of various assembled space-themed building block models
Figure 1: Collection of Assembled Space Models
This image displays a variety of models that can be constructed, including rockets, satellites, and a lunar lander, showcasing the diversity of the set.
Detailed views and dimensions of a space station building block model
Figure 2: Space Station Model Details
Detailed views of a space station model, illustrating its modular design and overall dimensions for assembly reference.
Detailed views and features of a satellite building block model
Figure 3: Satellite Model with Features
This satellite model consists of 804 pieces and includes two astronaut figures. It can be displayed in two different modes, as shown in the image, offering versatility in presentation.
Detailed views and dimensions of a second space station building block model
Figure 4: Alternative Space Station Model
Another space station model, providing different design and assembly challenges, with its own set of dimensions.
Detailed views and dimensions of an astronaut figure building block model
Figure 5: Astronaut Figure Model
An astronaut figure model, comprising 352 pieces, with detailed dimensions for accurate construction.
Rocket model with integrated LED lighting
Figure 6: Rocket Model with LED
A rocket model featuring integrated LED lighting, enhancing its display. Follow specific instructions for LED component installation.

Operating Your Models

Once assembled, your SEMBO Block models are ready for display or imaginative play. These models are static display pieces or can be used for creative storytelling.

  • Display: Place your completed models on a stable surface. Some models may include a display stand.
  • Interactive Play: Engage in imaginative play, creating your own space missions and adventures.
  • LED Functionality (if applicable): If your model includes LED lights, ensure batteries are correctly installed. Activate the lights using the designated switch on the battery compartment.

Maintenance

Proper care will ensure the longevity and appearance of your building block models.

  • Cleaning: Use a soft, dry cloth or a soft brush to gently remove dust from the models. For stubborn dirt, a slightly damp cloth can be used, but avoid excessive moisture.
  • Storage: Store models in a cool, dry place away from direct sunlight to prevent discoloration or warping of plastic parts.
  • Disassembly: If disassembling, do so carefully to avoid damaging the blocks. Store disassembled blocks in a container to prevent loss.

Troubleshooting

Common Issues and Solutions:

Missing Pieces:
Carefully check all packaging materials. If pieces are genuinely missing, contact customer support with details of the missing parts (as identified in the instruction booklet).
Blocks Not Connecting Properly:
Ensure you are using the correct blocks for the step. Apply firm, even pressure when connecting blocks. If a block is damaged, it may not connect properly.
Model Instability:
Re-examine the assembly steps, particularly for the base and load-bearing sections. Ensure all blocks are fully seated and connected.
LED Lights Not Working (if applicable):
Check battery installation and ensure batteries are fresh and correctly oriented. Verify all LED connections are secure as per the specific model's instructions.

Specifications

AttributeDetail
BrandSEMBO Block
Model NumberSpaceship building blocks
MaterialABS Plastic
Block SizeSmall building block (Compatible with Lego)
Plastic Block ShapeSelf-Locking Bricks
Is ElectricNo Battery (unless 'With Led' variant is chosen, then requires batteries for LED)
GenderUnisex
Recommend Age18+ (Suitable for both children and adults due to complexity)
Creator SeriesLong March 5 rocket
OriginMainland China
Package Weight1.5 kg
Package Dimensions (L x W x H)28 cm x 25 cm x 12 cm

User Tips

  • Organize Your Workspace: Before starting, clear a large, flat surface and organize your blocks. Using small containers for different types or colors of blocks can be very helpful.
  • Take Your Time: Building complex models requires patience. Don't rush the process; enjoy each step of the construction.
  • Double-Check Steps: If you encounter difficulty, re-examine the previous steps in the instruction booklet. A small error early on can affect later stages.
  • Creative Freedom: While instructions guide you to specific models, feel free to use the blocks to create your own unique space-themed designs once you've mastered the provided builds.

Warranty and Support

For any questions, concerns, or issues regarding your SEMBO Block set, please contact the seller directly through the platform where you made your purchase. Provide your order number and a detailed description of the issue for prompt assistance.

Please retain your proof of purchase for any support inquiries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.