staniot DS100

Contents

Staniot DS100 Wireless Door and Window Alarm Sensor User Manual

Model: DS100 | Brand: Staniot

1. Introduction

The Staniot DS100 is a wireless door and window alarm sensor designed to enhance the security of your home or office. This sensor detects the opening and closing of doors and windows, sending immediate alerts to your compatible Staniot security panel. It features easy installation and integrates seamlessly into your existing Staniot alarm system.

Staniot DS100 Entry Sensor installed on a door

Image: Staniot DS100 Entry Sensor installed on a door, highlighting easy installation, low voltage alarm, door opening/closing code, and 433MHz wireless connectivity.

2. Safety Information

  • Keep the device away from water and moisture.
  • Do not attempt to disassemble or repair the device yourself.
  • Use only the specified battery type (CR2032).
  • Dispose of batteries properly according to local regulations.
  • Ensure the device is installed securely to prevent accidental detachment.

3. Package Contents

Your Staniot DS100 package should contain:

  • 1 x Staniot DS100 Door/Window Sensor (main unit)
  • 1 x Magnetic strip (for door/window frame)
  • 1 x CR2032 battery (pre-installed)
  • Mounting adhesive/screws (may vary by package)

4. Specifications

Product dimensions and specifications table

Image: Diagram showing product dimensions and a table of technical specifications.

Staniot DS100 Technical Specifications
Feature Detail
Model Number DS100
Brand Name staniot
Origin Mainland China
Certification CE, RoHS
Smart Home Platform Tuya (Requires Staniot security panel for operation)
Wireless Parameters 433MHz, eV1527
Battery Specification CR2032 × 1 (Pre-installed)
Quiet Current <8µA
Alarm Current <15mA
Working Temperature -10°C ~ +50°C
Relative Humidity <95% (no condensation)
Main Unit Dimensions 65mm x 25mm x 13mm
Magnet Dimensions 52mm x 11.4mm x 13mm

5. Setup and Installation

The Staniot DS100 sensor is designed for easy installation on various types of doors and windows. It must be paired with a compatible Staniot security panel to function.

5.1. Physical Installation

  1. Identify a suitable location on your door or window frame where the main sensor unit and the magnetic strip can be mounted parallel to each other.
  2. Ensure the two parts are aligned so that the small triangles/marks on both parts face each other when the door/window is closed.
  3. Clean the surface thoroughly before applying the adhesive or mounting with screws.
  4. Attach the main sensor unit to the fixed part of the frame and the magnetic strip to the moving part of the door or window.
  5. Verify that the gap between the two parts is less than 15mm when the door/window is closed.
Staniot DS100 sensor on a window

Image: Staniot DS100 sensor installed on a window, demonstrating its compact design and suitability for various entry points.

5.2. Pairing with Staniot Security Panel

Follow these steps to pair your DS100 sensor with your Staniot security panel:

Video: Demonstration of the Staniot DS100 door sensor pairing process and alarm activation with a security panel.

  1. Ensure the two parts of the door sensor are placed together (door closed state).
  2. On your Staniot security panel, navigate to the 'Menu'.
  3. Select 'Accessory', then choose 'Detector'.
  4. Press the '+' icon to add a new detector.
  5. The panel will prompt you to trigger the accessory. Separate the two parts of the door sensor (simulate door opening).
  6. Once triggered, the panel will detect the sensor. You can then choose the 'Alarm Type' (e.g., 'Door Alarm'), 'Mode' (e.g., 'All arm active'), and set the 'Zone' for the detector.
  7. Confirm the settings to complete the pairing process.

Note: This sensor is not a standalone Wi-Fi device and requires a Staniot security panel for operation. It does not connect directly to the Tuya app without a compatible panel.

6. Operation

Once installed and paired, the DS100 sensor monitors the state of your door or window.

6.1. Detection States

Diagram of sensor closed and separated states

Image: Diagram illustrating the sensor's operation in 'Closed State' (no alarm, parts within 15mm) and 'Separated State' (alarm, parts separated by more than 15mm).

  • Closed State: When the distance between the main sensor unit and the magnetic strip is less than 15mm, the sensor is considered closed, and no alarm is triggered.
  • Separated State: When the distance between the main sensor unit and the magnetic strip is greater than 15mm, the sensor is considered open, and an alarm signal is immediately sent to the security panel.

6.2. Alarm and Notifications

When the sensor is triggered (separated state) and the security system is armed, the following actions may occur:

  • Instant APP Notifications: Your security panel will send an immediate alarm signal, resulting in instant notifications to your smartphone via the connected app.
  • Audible Alarm: The security panel will activate a loud alarm siren.
  • Door/Window Not Closed Warning: If you attempt to arm the system (e.g., set 'Away Arm') while a door or window with a DS100 sensor is open, the security panel can display a warning, reminding you to close it before arming.
Security panel showing 'Door/Window Not Closed Warning'

Image: A security panel displaying a 'Door/Window Not Closed Warning' when the 'Away Arm' mode is selected, indicating an open sensor.

6.3. Whole Home Coverage and Anti-Dismantling

Multiple DS100 sensors can be deployed throughout your property to create comprehensive coverage. The sensor also includes an anti-dismantling function to prevent unauthorized removal or tampering.

Floor plan showing multiple sensors connected to a security panel

Image: Floor plan diagram illustrating how multiple DS100 sensors can be connected wirelessly to a central security panel for whole home coverage.

7. Maintenance

7.1. Battery Replacement

The DS100 sensor uses a CR2032 coin cell battery. When the battery level is low, the sensor will typically send a low voltage alarm to your security panel. To replace the battery:

  1. Carefully open the sensor casing.
  2. Remove the old CR2032 battery.
  3. Insert a new CR2032 battery, ensuring correct polarity.
  4. Close the sensor casing securely.
  5. Test the sensor to ensure it is functioning correctly and communicating with the security panel.

7.2. Cleaning

Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.

8. Troubleshooting

  • Sensor not pairing: Ensure the sensor parts are correctly aligned (triangles facing each other) and separated during the pairing trigger. Check that the battery is correctly installed and has sufficient charge.
  • False alarms: Verify that the sensor is securely mounted and the gap between the main unit and magnet is consistently less than 15mm when closed. Check for any loose connections or environmental factors that might cause movement.
  • No alarm when triggered: Confirm the sensor is successfully paired and assigned to an active zone on your security panel. Check the panel's arming status.
  • Low battery warning: Replace the CR2032 battery as soon as possible to ensure continuous protection.
  • Does not work directly with Tuya app: The DS100 is designed to work with a Staniot security panel, which may use Tuya technology, but it is not a standalone device that connects directly to the Tuya app.

9. User Tips

  • Easy Pairing: Users have reported that the sensor pairs easily with the Staniot alarm system, making setup straightforward.
  • Reliable Performance: The sensor is noted for its reliable operation once correctly installed and configured.
  • System Integration: Remember that this sensor is an accessory for a Staniot security panel. It is not a standalone smart home device and requires the panel for full functionality, including app notifications and alarm activation.
  • Customizable Modes: Utilize the security panel's settings to customize alarm types and modes (e.g., 'Door Alarm', 'Away Arm', 'Stay Arm') and assign specific zones for each sensor. This allows for flexible responses, such as a chime instead of a full siren when the system is disarmed.

10. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your Staniot security panel or contact Staniot customer service directly. Keep your purchase receipt for warranty claims.

11. Compliance

This device complies with CE and RoHS standards.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.