1. Introduction
The ANNKE 5MP PoE Network Video Security System provides comprehensive surveillance for your home or business. This system features 5MP Super HD cameras, a 6MP NVR, advanced H.265+ video compression, and smart motion detection. Designed for reliability and ease of use, it offers robust protection day and night.

2. Package Contents
The contents of your package will vary depending on the number of cameras purchased (2, 4, or 8). Please verify all items upon receipt.
2.1. For 2 Cameras:
- 1x NVR (Network Video Recorder)
- 2x 5MP PoE Dome Cameras
- 1x 30m Network Cable
- 1x 18m Network Cable
- 1x Power Supply for NVR
- 1x USB Mouse
- 1x User Manual
- 1x Network Cable (additional)
- 1x HDMI Cable
- Screws and Waterproof Lids (quantity as needed)
2.2. For 4 or 8 Cameras:


- 1x NVR (Network Video Recorder)
- 4x or 8x 5MP PoE Dome Cameras
- 2x or 4x 30m Network Cables
- 2x or 4x 18m Network Cables
- 1x Power Supply for NVR
- 1x USB Mouse
- 1x User Manual
- 1x Network Cable (additional)
- 1x HDMI Cable
- Screws and Waterproof Lids (quantity as needed)
3. Setup Guide
This section outlines the steps for setting up your ANNKE PoE Network Video Security System.
3.1. Hard Drive Installation (if not pre-installed)
If your NVR did not come with a hard drive pre-installed, follow these steps:
- Unscrew and remove the top cover of the NVR using a Phillips head screwdriver.
- Connect the SATA data and power cables from the NVR to the hard drive.
- Secure the hard drive inside the NVR chassis using the provided screws.
- Replace the NVR cover and secure it with the screws.
3.2. System Connection
The ANNKE PoE system uses Power over Ethernet (PoE) technology, meaning a single network cable transmits both data and power to the cameras, simplifying wiring.
- Connect each PoE camera to an available PoE port on the NVR using the provided network cables.
- Connect the NVR to your monitor using the HDMI cable (or VGA cable if preferred).
- Connect the USB mouse to a USB port on the NVR.
- Connect the NVR to your network router using an Ethernet cable (LAN port on NVR).
- Connect the NVR power adapter to the NVR and then to a power outlet.


4. Operating Instructions
4.1. Initial Setup and Configuration
- After connecting all components and powering on the NVR, follow the on-screen prompts to complete the initial setup wizard. This typically includes setting a password/pattern, time zone, and network settings.
- Ensure the NVR's network status is 'Online' under Configuration > Network > Platform Access.
4.2. Remote Access via ANNKE Vision App
To view live footage and receive alerts on your mobile device:
- Download the 'ANNKE Vision' app from the App Store (iOS) or Google Play Store (Android) by scanning the QR codes displayed on the NVR's Platform Access screen.
- Open the app, register an account, and log in.
- Tap 'Add Device' and scan the NVR's QR code (SN code) found on the NVR's Platform Access screen or on the NVR label.
- Follow the in-app instructions to add the device. Once added, you can view live footage from your cameras.
4.3. Key Features
- 5MP Super HD Video: Cameras deliver 2592 x 1944 pixel resolution at 20 frames per second for clear, detailed footage.
- EXIR 2.0 Night Vision: Provides clear black and white night vision up to 100 feet (30m). With external ambient lights, cameras can achieve color night vision.
- 2.8mm Wide-Angle Lens: Offers a broad field of view for extensive coverage.
- Built-in Microphone: Records crisp audio along with video, allowing you to hear what's happening.
- H.265+ Video Compression: Efficiently compresses video files, allowing for up to 4 times longer recording duration compared to H.264, saving storage space.
- 24/7 Non-Stop Recording: Continuously records footage to the NVR's hard drive, even without internet access.





5. Advanced Features
5.1. Smart Motion Detection
The system supports human and vehicle detection, significantly reducing false alerts from environmental factors. You can customize motion detection zones to focus on critical areas.

5.2. Image Enhancement
- 120 dB WDR (Wide Dynamic Range): Automatically adjusts picture brightness for optimized, highly-detailed footage in strong light contrast conditions.
- 3D DNR (Digital Noise Reduction): Filters out digital noise from dim light or motion, resulting in cleaner images and smaller video file sizes.

6. Maintenance
6.1. Camera Durability
The cameras are built with heavy-duty metal housing, featuring IP67 weatherproof and IK10 vandal-proof ratings. This ensures protection against violent impacts, dust, water, and extreme temperatures ranging from -22°F (-30°C) to 140°F (60°C).

6.2. General Care
- Regularly check cable connections for security and integrity.
- Keep camera lenses clean for optimal image quality. Use a soft, damp cloth.
- Ensure the NVR is placed in a well-ventilated area to prevent overheating.
- Periodically check for firmware updates for both the NVR and cameras through the ANNKE Vision app or NVR interface to ensure optimal performance and security.
7. Troubleshooting & User Tips
7.1. Common Issues & Solutions
- No image on monitor: Check all cable connections (HDMI/VGA, power, network). Ensure the NVR is powered on and the monitor is set to the correct input.
- Remote access not working: Verify the NVR's network status is 'Online' in the configuration. Ensure your mobile device has a stable internet connection and the ANNKE Vision app is correctly configured with the NVR's SN code.
- No motion alerts: Check motion detection settings in the NVR and app. Ensure detection zones are properly configured and alerts are enabled.
7.2. User Tips
- Camera Movement: Note that these dome cameras are fixed and cannot be remotely moved (panned, tilted, or zoomed) via the app or joystick. Ensure they are positioned correctly during installation.
- Compatibility: The NVR supports ONVIF protocols, which means it may be compatible with other ONVIF-compliant cameras, including some Hikvision models. However, full functionality with third-party cameras is not guaranteed and may require specific configuration.
- Cable Length: While the system includes network cables, you can use longer network cables (up to 330 ft) or a PoE switch to extend the connection distance between cameras and the NVR for greater installation flexibility.
8. Specifications
8.1. Camera Specifications

| Feature | Description |
|---|---|
| Image Sensor | 1/3'' Progressive Scan CMOS |
| Max Stream Frame Rate | 50 Hz: 20 fps (2592 x 1944), 25 fps (2560 x 1440, 2304 x 1296, 1920 x 1080, 1280 x 720) 60 Hz: 20 fps (2592 x 1944), 30 fps (2560 x 1440, 2304 x 1296, 1920 x 1080, 1280 x 720) |
| Substream Max. Frame Rate | 50 Hz: 25 fps (640 x 480, 640 x 360, 320 x 240) 60 Hz: 30 fps (640 x 480, 640 x 360, 320 x 240) |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Video Bitrate | 32 Kbps - 8 Mbps |
| Audio Compression | G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/aac |
| Audio Input | Built-in Microphone |
| Lens | 2.8mm |
| Min. Illumination | Color: 0.028 Lux @(F2.0, AGC On) |
| Angle of View | Horizontal FoV 71.5°, Vertical FoV 53°, Diagonal FoV 91° |
| Number of Infrared LEDs | 2 pcs |
| Night Vision Distance | Up to 100 ft/30 m |
| DNR | 3D DNR |
| Wide Dynamic Range | 120 dB WDR |
| ONVIF | Support |
| IR-Cut Filter | Yes |
| Ethernet | RJ45 X1 (10/100 M) |
| Housing | Metal & Plastic |
| Color | White |
| Storage | Built-in MicroSD/SDHC/SDXC Slot, up to 256 GB |
| Hardware Reset | Yes |
| Operating Power | DC 12 V; PoE (802.3af) |
| Operating Temperature | -22 °F – 140 °F/-30 °C – 60 °C |
| Indoor/Outdoor Use | Indoor/Outdoor |
| Interface Protection | IP67, IK10, TVS 2000V lightning protection, surge protection and voltage transient protection |
| Dimension (L X W X H) | Ø120 x 92.2 mm (4.72" x 3.63") |
| Weight | 440 g (1.0 lb.) |
8.2. NVR Specifications
| Feature | Description |
|---|---|
| Video Compression | H.265+/H.265/H.264+/H.264 |
| IP Video Input | 8CH POE |
| Video Output | HDMI & VGA Up to 1080P |
| Incoming Bandwidth | 60M |
| Max Recording Resolution | Up to 6MP |
| Max Playback Resolution | Up to 6MP |
| Max Playback Channel | 8CH |
| Max Playback Capacity | 4-ch@1080P, 1-ch@6MP@25fps |
| Onvif Protocols | Support |
| Network Interface | RJ45x1 (10/100M) |
| PoE | 8 Ports (IEEE802.3af/at) |
| USB | 2x USB 2.0 |
| HDD Interface | 1 SATA Interface |
| HDD Capacity | Up to 6 TB Capacity |
| Operating Power | DC48V |
| Power Consumption | ≤10W (without HDD and POE) POE: Max 25.5W for single port |
| Working Temperature | 14 °F ~ 131 °F / -10 °C ~ +55 °C |
| Dimensions | 10.4" x 8.9" x 1.9" / 265 x 225 x 48mm |
| Weight | 2.2lb / 1KG |
9. Warranty and Support
ANNKE provides a 2-year warranty for the product and lifetime phone and email support. For any technical assistance or inquiries, please contact ANNKE customer service.