K&F CONCEPT SA255C1

Contents

K&F Concept SA255C1 Carbon Fiber Camera Tripod Instruction Manual

Model: SA255C1 (D255C4+BH-28L)

Brand: K&F CONCEPT

Product Overview

The K&F Concept SA255C1 is a lightweight and portable carbon fiber camera tripod designed for various photography styles, including landscape, DSLR, mirrorless, and mobile phone videography. It features a 360-degree ball head, a detachable monopod function, and adjustable leg angles for versatile use. Its carbon fiber construction ensures durability and ease of transport.

K&F Concept SA255C1 Carbon Fiber Camera Tripod with phone holder and ball head
Overview of the K&F Concept SA255C1 Carbon Fiber Camera Tripod, highlighting its key features and accessories.
Product demonstration video showcasing the tripod's features and versatility.

Package Contents

Ensure all items are present before proceeding with setup:

  • 1 x Carbon Fiber Tripod (Model SA255C1)
  • 1 x Ball Head (BH-28L)
  • 1 x Multifunctional Quick Release Plate (with phone clip functionality)
  • 1 x Tripod Carry Bag
  • 1 x Shoulder Strap
  • 1 x Instruction Manual (this document)
Contents of the K&F Concept SA255C1 tripod package
All components included in the product package.

Setup Instructions

1. Attaching the Ball Head

  1. Unfold the tripod legs.
  2. Ensure the central column is securely fastened.
  3. Mount the BH-28L ball head onto the central column's 3/8" screw. Turn clockwise until securely tightened.
Detailed view of the 28mm ball head and quick release plate
The 28mm metal ball head (BH-28L) with its quick release plate.

2. Attaching Your Camera/Device

  1. Attach the multifunctional quick release plate to the bottom of your camera or device using the 1/4" screw. Ensure it is tightly secured.
  2. Open the clamp on the ball head and slide the quick release plate with your camera into the clamp.
  3. Securely tighten the clamp to prevent accidental detachment.
  4. For mobile phones, extend the quick release plate to reveal the phone clip and secure your phone. The cold shoe holder on the plate can be used for accessories like microphones or lights.
Multifunctional quick release plate with 1/4 inch screw and cold shoe holder
The multifunctional quick release plate, showing its 1/4" screw and cold shoe holder for various devices.
2-in-1 Magic Quick Release Plate with camera and phone setup
Demonstration of the 2-in-1 Magic Quick Release Plate being used with both a camera and a mobile phone.

Operating Instructions

1. Adjusting Tripod Height

  1. **Leg Extension**: Loosen the spiral type locking knobs on each leg section. Extend the legs to the desired height and then firmly tighten the knobs to secure them. The tripod features 5-section legs.
  2. **Central Axis Extension**: The central axis can be extended in 2 sections for additional height. Loosen the central axis lock, extend, and then tighten.
Tripod height adjustments from folded to fully extended
Visual guide for adjusting the tripod's height, showing folded and various extended configurations.

2. Adjusting Leg Angles

The tripod legs can be adjusted to three different opening angles to provide stability on uneven terrain or for specific shooting requirements. To adjust, pull out the angle lock and set the leg to the desired position, then push the lock back in to secure.

Tripod leg angle adjustment mechanism
Close-up of the 3-stop adjustment mechanism for the tripod leg angles.

3. Monopod Conversion

To convert the tripod into a monopod:

  1. Loosen the knob at the top of one of the tripod legs (the one with the foam grip).
  2. Pull out the central column.
  3. Attach the central column to the detached leg to form a monopod.
Demonstration of converting the tripod into a monopod
Steps to detach a leg and the central column to form a monopod.

4. Low Angle Photography

For low angle shots, invert the central column and mount your camera upside down. This allows for extremely low perspectives, ideal for macro or unique ground-level shots.

Tripod configured for low angle photography
Example of the tripod set up for low angle photography.

Maintenance

  • **Cleaning**: Wipe down the carbon fiber tubes and metal parts with a soft, dry cloth after each use. For stubborn dirt, use a slightly damp cloth and dry immediately.
  • **Lubrication**: Periodically check the locking mechanisms and ball head for smooth operation. Apply a small amount of silicone-based lubricant if necessary, avoiding excessive application.
  • **Storage**: Store the tripod in its carry bag in a dry, cool place away from direct sunlight and extreme temperatures.
  • **Inspection**: Regularly inspect all screws, knobs, and leg locks for tightness and wear. Tighten any loose components to ensure stability and safety.

Troubleshooting

Problem: Tripod legs do not extend or retract smoothly.
**Solution**: Check if the spiral type locking knobs are fully loosened. Clean any dirt or debris from the leg sections. Apply a small amount of silicone lubricant if friction persists.
Problem: Camera feels unstable on the ball head.
**Solution**: Ensure the quick release plate is securely attached to your camera and the ball head clamp is fully tightened. Verify that the ball head's locking knob is firm. Check the tripod's load capacity against your camera and lens weight.
Problem: Monopod conversion is difficult.
**Solution**: Make sure the knob for detaching the central column is completely loosened. Gently twist and pull to separate the components. Do not force it.

Specifications

K&F Concept SA255C1 Tripod Specifications
FeatureDetail
Model NumberSA255C1 (also D255C4+BH-28L)
TypeProfessional Tripod
MaterialCarbon Fiber (legs), Aluminum Alloy (ball head)
Max Extended Length1780 mm (70.1 inches)
Folded Length420 mm (16.5 inches)
Weight1.33 kg (2.93 lbs)
Load Capacity10 kg (22.04 lbs)
Leg Sections5
Max Tube Diameter25 mm (0.98 inches)
Ball Head Diameter28 mm (1.1 inches)
Ball Head Interface3/8" Screw
CompatibilityDSLRs, Mirrorless System Cameras, Video Cameras, 360° Video Cameras, Point & Shoot Cameras, Special Cameras
Detailed specifications of the K&F Concept SA255C1 tripod
Key dimensions and features of the tripod.
Detailed specifications of the BH-28L ball head
Key specifications of the included BH-28L ball head.

User Tips

  • **Optimal Tripod Height**: A general guideline for comfortable shooting height is your own height minus 15cm. Adjust as needed for specific shots and compositions.
  • **Carbon Fiber Advantage**: Carbon fiber tripods are approximately 30% lighter than aluminum counterparts, offer higher strength, and are rust-resistant, making them ideal for travel and outdoor use.
  • **Load Capacity Safety**: When choosing a tripod, ensure its load capacity is at least double the weight of your camera and heaviest lens combination for optimal stability and safety. For example, if your equipment weighs 2kg, select a tripod with a bearing capacity above 4kg.
  • **Locking Mechanism Choice**: Twist locks are known for their simple structure, ease of maintenance, and part replacement. Lever locks offer faster operation, often with one hand.
Questions and Answers about tripod features
Common questions and answers providing useful tips for tripod selection and use.

Warranty and Support

This K&F Concept SA255C1 Carbon Fiber Camera Tripod comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact K&F CONCEPT Official Store customer service.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.