1. Introduction
The Mileseey WD10 Multifunction Wall Detector is a versatile tool designed to enhance safety during drilling and construction tasks. It accurately detects various hidden objects within walls, ceilings, and floors, including magnetic metals, non-magnetic metals, wood, and live AC wires. Equipped with a large area sensor, backlit LCD display, and dual alarm modes, the WD10 provides precise positioning and clear indications for a safer working environment.

Mileseey WD10 Wall Detector - More Safe for drilling
2. Key Features
The WD10 Wall Detector offers a range of features for fast and accurate detection:
- Multi-Material Detection: Capable of detecting magnetic metals, non-magnetic metals, wood, and live AC wires.
- Deep Detection Capability: Detects objects up to 8 cm deep, depending on the material.
- Center-Point Depth Display: Provides precise location and depth information on the LCD.
- Dual Alarm Mode: Features both sound and reminder light alarms for clear indications.
- Backlit LCD: High-definition large screen with backlight for clear data observation in various lighting conditions.
- IP65 Protection: Dustproof and waterproof design ensures durability in harsh environments.
- Three-Color Indicator: Red, yellow, and green lights provide intuitive feedback on object proximity.
- User-Friendly Design: Equipped with a large area sensor for improved accuracy and up-and-down parallel Velcro for smooth movement on surfaces.

Fast and Accurate / Fast Positioning Features
3. Specifications
| Attribute | Value |
|---|---|
| Model | Mileseey WD10 |
| Depth Range (Magnetic Metal) | 8 cm |
| Depth Range (Non-magnetic Metal) | 5 cm |
| Depth Range (AC Cable) | 5 cm |
| Depth Range (Wood) | 2 cm |
| Units | CM/in |
| Non-metal Detection | Yes |
| Metal Detection | Yes |
| Live Detection | 50/60 Hz AC |
| Auto Shut Off | 300s |
| Auto Backlight Shut Off | 10s |
| Protection Class | IP65 |
| Battery Type | 3xAAA (not included) |
| Working Hours | ≥7.5h |
| Certifications | CE, FCC |

Detection Sensitivity and Depth
4. Setup
4.1 Battery Installation
- Locate the battery compartment on the back of the device.
- Open the battery cover.
- Insert three AAA batteries (not included), ensuring correct polarity.
- Close the battery cover securely.
4.2 Power On/Off and Unit Selection
- Power On/Off: Short press the red power button (labeled 'Power on/off button' in the diagram) to turn the device on or off.
- Unit Selection (cm/in): Long press the voice key (speaker icon button) to switch between centimeter (cm) and inch (in) units.

Product Button Layout and Components
4.3 Initial Calibration
Before starting detection, ensure the device is calibrated. The device will display a 'Green light' and 'Calibration completed move to start detection' message when ready. This ensures accurate readings.
5. Operation
The WD10 Wall Detector is designed for easy and precise operation. It uses a large area sensor and central target positioning to ensure detection accuracy.
5.1 Detection Modes
The device supports three primary detection modes:
- Metal Detection Mode: For locating magnetic and non-magnetic metals.
- Non-Metal Detection Mode: Primarily for detecting wood studs and beams.
- AC Detection Mode: For identifying live AC electrical wires.
Select the appropriate mode using the dedicated buttons on the device.
5.2 Performing a Scan
- Place the detector flat against the surface you wish to scan.
- Ensure the device is calibrated (green light indicates readiness).
- Slowly slide the detector across the surface. The large area sensor and parallel Velcro design help maintain smooth contact.
- Observe the LCD display and indicator lights for feedback.
5.3 Interpreting Indicators
The WD10 provides visual and audible feedback:
- Three-Color Indicator:
- Green Light: Indicates no object near the detection sensing area.
- Yellow Light: Turns on when gradually approaching a metal object or sensing a weak signal.
- Red Light: Illuminates when close to an object, indicating a strong signal, typically the central part of the object.
- Dual Alarm Mode: When the detector senses a related substance, the reminder light will change from green to red, accompanied by an audible beep.
- LCD Display: Shows the center point, depth, and signal strength, providing detailed information about the detected object.

Three-Color Indicator for Accurate Instructions

Metal Detection Location Icon

Wood Detection Location Icon

Dual Alarm Mode
Video: Demonstration of the Mileseey WD10 Wall Detector in action, showing detection of various materials and the display feedback.
6. Maintenance
6.1 Cleaning
To clean the device, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the casing or display.
6.2 Storage
Store the Mileseey WD10 in a dry place, away from direct sunlight and extreme temperatures. If the device will not be used for an extended period, remove the batteries to prevent leakage and damage.
6.3 IP65 Protection
The device has an IP65 protection level, meaning it is dustproof and protected against low-pressure water jets. This allows it to meet measurement requirements in harsh environments, but it should not be submerged in water.

IP65 Protection Level
7. Troubleshooting
- Inaccurate Readings: The detection result can be affected by the material of the detected object, its size, and the material and state of the detection surface. Ensure the device is held flat against the surface and calibrated correctly.
- Non-Metal Detection Issues: In non-metal detection mode, the device must be closely touching the measured surface. If the device is lifted during operation, recalibration is required. Press the non-metal measure button to recalibrate.
- AC Wire Detection Depth: If the AC cable is not charged (i.e., no current flowing through it), the detection depth for live wires will decrease significantly or may not be detected at all.
- Calibration Failure: If the green light does not appear after powering on, ensure the device is placed on a clear, flat surface away from any potential obstructions during startup.
8. User Tips
- Concrete vs. Gypsum: Users have noted that wiring in concrete walls is often detected more effectively than in gypsum. Keep this in mind when working with different wall materials.
- Charged Wires for Best AC Detection: For optimal detection of AC wires, ensure they are live (carrying current). Uncharged cables may be harder to detect or have reduced detection depth.
- Recalibration for Non-Metal Mode: If you lift the device from the wall while in non-metal detection mode, always recalibrate by pressing the non-metal measure button before continuing to scan.
- Detection Limitations: The Mileseey WD10 is designed to detect magnetic metals, non-magnetic metals, wood, and live AC wires. It does not explicitly state detection capabilities for PVC pipes or water pipes.
- Maximum Depth for Wires: For wires in concrete, the detection depth is typically not more than 5 cm. Always exercise caution when drilling.
9. Warranty and Support
The Mileseey WD10 Wall Detector is certified with CE and FCC standards, ensuring compliance with relevant safety and quality regulations.
For any technical support, warranty claims, or further inquiries, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.