HQCAM Mini IR Wireless IP Birdhouse Camera User Manual

1. Introduction

Thank you for choosing the HQCAM Mini IR Wireless IP Birdhouse Camera. This compact and versatile camera is designed for various surveillance needs, including monitoring bird nests, indoor spaces, or vehicles. It features high-definition video recording, infrared night vision, motion detection, and remote monitoring capabilities via mobile app and PC software.

This manual provides detailed instructions for the proper installation, setup, and operation of your camera. Please read it thoroughly before using the product to ensure optimal performance and safety.

2. Safety Information

⚠️ Disclaimer: Camera products can only be used for purposes permissible under applicable laws and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

Always ensure the camera is installed in a stable location to prevent it from falling. Do not expose the camera to extreme temperatures, humidity, or direct water contact unless specified as waterproof. Use only the recommended power supply.

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact your vendor immediately.

• HQCAM Mini IR Wireless IP Camera
• Mounting Bracket (Bracket A, optional Bracket B may be included depending on model)
• Power Adapter (DC12V)
• User Manual (this document)

4. Specifications

5. Product Overview

The HQCAM Mini IP Camera is designed for discreet surveillance with its compact size and invisible infrared night vision. It features a built-in microphone for audio recording and a TF card slot for local storage. The camera supports various resolutions up to 8MP 4K, offering clear video capture.

5.1 Components

• Camera Lens: Available in various focal lengths (e.g., 2.1mm, 2.8mm, 3.6mm, 6mm, 1.7mm).
• Infrared Lamps: 940nm invisible IR LEDs for night vision.
• Built-in Microphone: For audio recording.
• TF Card Slot: Supports up to 128GB for local video storage.
• WiFi Antenna: For wireless network connectivity.
• Restore Button: Used for resetting the camera to factory defaults.
• Network Interface: (Note: This model is specified as 'without RJ45 PORT', implying primary connection is WiFi, but the wiring diagram shows a network interface for initial setup or wired connection if available on specific variants).
• DC12V Power Supply Port: For connecting the power adapter.
• Mounting Bracket: For flexible positioning.

6. Installation

The camera is designed for embedded installation and comes with a mounting bracket for versatile placement.

6.1 Mounting the Camera

1. Choose a suitable location for the camera, ensuring it has a clear view and good Wi-Fi signal strength (signal value higher than 70% is recommended).
2. Securely attach the mounting bracket (Bracket A) to a flat surface using appropriate screws.
3. Attach the camera to the bracket and adjust the angle as needed.
4. If using an optional Bracket B, follow its specific installation instructions.

7. Initial Setup and Connectivity

7.1 Powering On

Connect the DC12V power adapter to the camera's power supply port and plug it into an electrical outlet. The camera will power on and initiate its startup sequence.

7.2 Connecting with Mobile Phone (CamHi/CamHiPro App)

1. Download the App: Download 'CamHiPro' or 'CamHi' from the Google Play Store (for Android) or Apple App Store (for iOS). You can also scan the QR codes below to get the app.



2. Connect to Camera's Hotspot: Go to your phone's 'Settings' > 'WLAN' (Wi-Fi) page. Find the camera's hotspot, which will typically appear as 'IPCAM-******' (e.g., IPCAM-66666). If you don't see it, reset the camera and wait 1 minute.
3. Enter Hotspot Password: The default hotspot password is '01234567'. Connect to this network.
4. Add Camera in App: Open the CamHi/CamHiPro app. Click 'Add Camera', then 'IP Camera', and then 'New device'.
5. Configure Wireless Settings: The app will guide you to configure the camera's wireless settings. Choose your home Wi-Fi network and enter its password. Ensure your Wi-Fi signal is higher than 70%.
6. Confirm and View: Name your camera and click 'confirm'. Once added successfully, you can click on the camera in the app to view the live feed.

7.3 Connecting with PC Software

The camera supports PC client software for monitoring and configuration.

1. Install 'SearchTool' Software: Install the 'SearchTool' software on your PC. This tool will automatically assign an IP address to the camera, or you can revise it manually.



2. Install 'HIP2P Client Software': For P2P functionality on PC, install the 'HIP2P Client Software'.
3. Add Camera: In the HIP2P Client Software, click the setting button, then 'Add area' and 'Add device'. Fill in the camera's UID (Unique ID) and password to add it.



4. IP Camera Client: Use the 'IP Camera Client' software to adjust various parameters, manage recording modes (All-day, Schedule, Motion detection), and support PC recording remotely.

8. Operation

8.1 Remote Monitoring

Once connected to the app or PC software, you can remotely view the live feed from your camera from anywhere with an internet connection.

8.2 Night Vision

The camera is equipped with 940nm infrared lamps, providing invisible night vision. This ensures clear video capture in low-light conditions without disturbing subjects like birds or animals.

8.3 Video Resolution

The camera supports various resolutions, including 2MP (1080P), 5MP, and 8MP (4K). For optimal 4K HD resolution, ensure your Network Video Recorder (NVR) also supports 4K.

8.4 Recording and Alarms

Configure recording modes (all-day, schedule, motion detection) and alarm actions (FTP Photo, Email Photo, Local Alarm) through the PC client software or mobile app.

9. Maintenance

• Cleaning: Use a soft, dry cloth to clean the camera lens and body. Do not use harsh chemicals or abrasive cleaners.
• Firmware Updates: Periodically check for firmware updates through the mobile app or manufacturer's website to ensure optimal performance and security.
• Storage Management: Regularly back up important recordings from the TF card and format the card to maintain recording efficiency.

10. Troubleshooting

10.1 No Power

• Ensure the power adapter is securely connected to the camera and a working power outlet.
• Verify the power adapter is the correct DC12V type.

10.2 Cannot Connect to Wi-Fi

• Make sure the camera is within range of your Wi-Fi router.
• Check that the Wi-Fi signal strength at the camera's location is above 70%.
• Double-check the Wi-Fi password entered during setup.
• Try resetting the camera using the restore button and repeat the setup process.

10.3 Poor Video Quality

• Ensure the camera lens is clean and free from obstructions.
• For 4K resolution, confirm that your NVR (Network Video Recorder) supports 4K input. If your NVR is 5MP/4MP/1080P, you will only get the corresponding resolution.
• Check your internet connection speed, especially for remote viewing.

10.4 App/PC Software Issues

• Ensure you are using the correct app ('CamHi' or 'CamHiPro') and the latest version.
• For PC software, ensure 'SearchTool' and 'HIP2P Client Software' are correctly installed and updated.
• Verify the camera's UID and password are correct when adding the device.

11. User Tips

• When setting up, ensure your mobile device is close to the camera to establish the initial hotspot connection easily.
• If you experience connectivity issues, try restarting both your router and the camera.
• For continuous recording, consider using a high-endurance TF card and regularly check its storage capacity.
• Utilize the motion detection feature to save storage space and receive alerts only when activity is detected.

12. Warranty and Support

For any issues or questions regarding your HQCAM Mini IR Wireless IP Birdhouse Camera, please contact our customer service. We aim to provide quick replies within 8 hours and quality after-sales service.