XIAOMI BN42

Contents

User Manual: BN42 Replacement Battery

For Xiaomi Redmi 4 / Redmi 4 Prime

1. Introduction

This manual provides essential information for the safe and effective use of your BN42 replacement battery, designed for Xiaomi Redmi 4 and Redmi 4 Prime smartphones. Please read this manual carefully before installation and use to ensure optimal performance and safety.

2. Safety Information and Warnings

Your safety is paramount. Please observe the following warnings and guidelines:

  • Battery Disassembly Danger: Do not attempt to disassemble the battery. Disassembly can lead to burning and explosion.
  • Charging: Use only designated chargers. Using non-designated chargers can be dangerous. The charging limit voltage is 4.40V.
  • Water Damage: Do not use the battery if it has been immersed in water or exposed to moisture.
  • Physical Damage: Do not continue to use the battery if it shows signs of swelling, deformation, or any other physical damage.
  • Temperature: Do not place the battery in high-temperature areas or expose it to direct sunlight.
  • Storage: Do not store the battery for a long time without charge. Ensure it has some charge if storing for extended periods.
  • Disposal: Dispose of batteries properly according to local regulations. Do not dispose of in household waste.
Front view of BN42 battery with Chinese safety warnings and specifications.
Front view of the BN42 battery, displaying model number, voltage, capacity, and critical safety warnings in Chinese. Key warnings include: danger of disassembly, risk of burning/explosion, use only designated chargers, do not use if water-damaged, do not use if swollen/deformed, avoid high temperatures, and do not store uncharged for long periods.

3. Setup (Installation)

Replacing a smartphone battery requires technical skill and specialized tools. Incorrect installation can damage your device or the new battery. It is highly recommended to seek professional installation from a qualified technician.

If you choose to proceed with self-installation, please ensure you:

  1. Power off your device completely before starting.
  2. Use appropriate tools to open the phone casing without causing damage.
  3. Carefully disconnect the old battery connector from the motherboard.
  4. Remove the old battery, noting any adhesive used.
  5. Install the new BN42 battery, ensuring it is properly seated and the connector is securely attached.
  6. Reassemble your device carefully.
Back view of BN42 battery showing connector area.
Back view of the BN42 battery, illustrating the connector and internal markings.

4. Operating the Battery

Once installed, the BN42 battery operates like your original smartphone battery. For optimal performance:

  • Initial Charge: It is recommended to fully charge the battery after installation.
  • Charging Cycles: Modern lithium-ion batteries do not require full discharge before recharging. You can charge your phone whenever convenient.
  • Avoid Extreme Discharge: Try to avoid letting the battery drain completely to 0% frequently, as this can reduce its lifespan.

5. Maintenance

Proper maintenance can extend the life of your battery:

  • Temperature Control: Avoid exposing your phone to extreme temperatures (very hot or very cold), as this can degrade battery performance and lifespan.
  • Charging Habits: Use the original or a certified compatible charger. Avoid overcharging for extended periods (e.g., leaving it plugged in overnight every night).
  • Software Updates: Keep your phone's operating system updated, as software optimizations can improve battery efficiency.

6. Troubleshooting

If you encounter issues with your new battery, consider the following:

  • Battery Not Charging:
    • Check if the charger and charging cable are working correctly.
    • Ensure the battery connector is properly seated inside the phone.
    • Try restarting your phone.
  • Fast Battery Drain:
    • Check background apps and services that might be consuming excessive power.
    • Reduce screen brightness or enable power-saving modes.
    • Ensure your phone's software is up to date.
  • Phone Not Turning On:
    • Ensure the battery has sufficient charge. Connect to a charger for at least 30 minutes.
    • Verify the battery connection inside the phone.

If problems persist, it is advisable to consult a professional repair service.

7. Specifications

FeatureSpecification
Model NumberBN42
CompatibilityXiaomi Redmi 4 / Redmi 4 Prime
Battery TypeLithium-ion Polymer Battery
Rated Voltage3.85V
Rated Capacity4000mAh
Typical Capacity4100mAh
Watt-hours (Min/Typ)15.4Wh / 15.8Wh
Charging Limit Voltage4.40V
Quality CertificationCE
Original or NotCompatible
OriginMainland China
Manufacturing Date2020/02/08 (Example, may vary by batch)

8. User Tips

  • For the first few charge cycles, observe the battery performance closely. It may take a few cycles for the battery management system to recalibrate.
  • If you notice any unusual heating during charging or use, immediately disconnect the charger and power off the device.
  • Regularly clean the charging port of your phone to ensure good contact and prevent charging issues.

9. Warranty and Support

For warranty claims or technical support, please contact the seller or retailer from whom you purchased this product. Keep your proof of purchase for any warranty-related inquiries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.